similar to: cannot kickstart after buying new SMC switch

Hi, I'm trying to track down why I'm getting calls dropped on an infrequent basis between two asterisk servers which are at the same physical location and connected to each other with UTP ethernet. Here is the connection diagram Asterisk Server 1 ===UTPENET== Switch ====UTPENET==== Asterisk Server 2 I see sporadic RX and TX frame retries when I enable iax2 debugging on either box.

I am using 8021q vlans on my servers, and I cannot figure out how to make PXE/DHCP work. Has anyone figured out how to do this ?

I used to be able to modify my modules.conf file so that certain NIC cards would load specific drivers. Has this changed in kernel 2.6 i.e. <snip /etc/modules.conf> alias eth0 e100 alias eth1 e1000 </snip> It used to be that I could reverse this order and eth0 would be the GigE card.

I''ve installed SXDE (snv_89) and found that the web console only listens on https://localhost:6789/ now, and the module for ZFS admin doesn''t work. When I open the link, the left frame lists a stacktrace (below) and the right frame is plain empty. Any suggestions? I tried substituting different SUNWzfsgr and SUNWzfsgu packages from older Solarises (x86/sparc, snv_77/84/89,

This is what I have for configuring software raid on sata drives in my kickstart config <snip kickstart.cfg> clearpart --initlabel --all part swap --size=2048 --ondisk=sdb part swap --size=2048 --ondisk=sda part raid.01 --size=101 --ondisk=sda part raid.02 --size=101 --ondisk=sdb part raid.04 --size=1 --grow --ondisk=sdb part raid.03 --size=1 --grow --ondisk=sda raid / --fstype ext3

What is the package selection group that I must specify to install the i386 group of compatible rpms into my kickstart. --

An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20090522/b97cb2dc/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: smc2.png Type: image/png Size: 68389 bytes Desc: not available URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20090522/b97cb2dc/attachment.png>

Hi, while kickstarting our virtual machines with PXE we often run into kickstart/anaconda failing with [...] [...] dracut-mount[xxx]: Warning: Can't mount root filesystem [...] dracut-mount[xxx]: Warning: /dev/root does not exist [...] dracut-mount[xxx]:/lib/dracut-lib.sh: line 1030: echo write error: No space left on device Starting Dracut Emergency Shell... Warning: /dev/root

Hey, I was thinking of added some stuff about setting the network settings from the lilo prompt instead of waiting for a dhcp timeout when kickstarting a system.. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-docs/attachments/20070316/383dbe2f/attachment-0002.html>

Hi all, I'm having a bit of trouble with something and was wondering if anyone else has encountered this or knows what the problem is. I have one computer I would like to kickstart a centos 5.0 or 5.1 install. I have another computer which is the tftpboot server and contains the centos 5.0 and centos 5.1 install directories I wish to do the kickstart over nfs and my network is using MTU

Hi , I am getting the delay in pinging (from different network) , the guest after live migration . Here is the scenario: 0. OS : RHEL5.4 86_64 1. Host-A. Port eth1 , it is trunked with three subnets xxx.xx.15.xxx xxx.xx.16.xxx xxx.xx.17.xxx Guest created on 15, 16 ,17 subnets. Gust15-A created on subnet 15 Gust16-A

Anyone point me in the direction of a good howto on kickstarting an 1850 or 2850 with the latest 4.x release - I presume one does not use a ks floppy anymore as the kernel would be too big ? thanks

Hello, I seem to recall from my redhat5/6/7 days that certain installation methods used for kickstarting only invoked text mode install. Now I read that graphical install is default in kickstart on el5/6. However, in my test environment (with older HP DL140G3) I only get text mode install up, even if I specify graphical in kickstart file, with both nfs and http install methods. There's no

Has someone created a how to or a tutorial for installing/configuring DELL openmanage on centos ? --

Hello, I'm trying to setup a CentOS-4.3 kickstart. When vmlinuz is loading, a message appears "Boot failed: please change disks and press a key to continue." I am kickstarting via a USB flash drive. From the i386 ISO image #1, I am using vmlinuz from the isolinux directory. I have grabbed the vmlinuz file from a couple different mirrors just in case the one I had originally

Dear Sir, I was trying to install bridge as we are installing scps gateway in our testbed.This requires us to install the bridge. Our Linux version is 2.4.18 ~3 and we are using redhat 7.2 Please let me know which is the bridge I should install and how to configure it. Before configuring the bridge what I should check in my configuration. Thanks for your time, Sincerely Rama ===== I hear

My BIOS shows all my RAM, but when I boot up linux it does not see all the RAM I have two one GIG sticks of RAM, which show up in my bios, but when typing free, I see that it only shows 256Megs. Is there a way to specify the amount of RAM if linux cannot detect this, or how can I fix/tweak the OS to recognize the amount of RAM my OS is centos-4-x86_64 on a DELL 1850 [root at smtcorav02 ~ ]#

Andrew and Dennis are spot on. Their conclusions about your server being connected to an access port and not a trunk port would be my conclusion as well. On Sat, Jan 24, 2015 at 9:11 AM, Dennis Jacobfeuerborn < dennisml at conversis.de> wrote: > Hi Boris, > what I'd like to know is the actual VLAN configuration of the switch > port (link-type and tagged and untagged VLANs).

I cannot seem to find the 3.5 dvd torrent. Does anyone know where this is. --

When using things like links, centericq, or ntsysv on my fedora core 2 box the fonts in ncurses based programs look fine, but on my centos4.2 box all the pipes and dashes end up looking like ?????????????????? Does anyone know how to fix this problem ?