similar to: iax2 event status using asterisk 1.0.3 & iaxfriends

I don't want to rain on Dan's parade, but I'd like to call everyone's attention to an existing project. Steve Kann has developed a crossplatform IAX/IAX2 library, and there are a few clients available for it. I have written iaxComm using the wx toolkit. It compiles and runs under Windows XP using the MinGW tool chain. A precompiled IAX only version is available at

I can run iaxcomm by itself...and I start up Asterisk on it own... But if I start Asterisk first, then launch iaxcomm I get this error: bash-2.05b$ ./iaxcomm Error wxWindows Fatal Error : Couldn't Initialize IAX Client . bash-2.05b$ and if I start iaxcomm first then launch asterisk, I get this startup error with asterisk: bash-2.05b# asterisk -vvvcg . . <not shown> . == Registered

Talking to myself ... ;-) Solved this by ... disallow=all allow=gsm ;allow=ulaw ;allow=alaw -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Paulo Mannheimer Sent: quinta-feira, 11 de dezembro de 2003 09:02 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Iax, Iax2 and Iaxcomm Hi, I'm trying

Hi there, Maybe this has been cared about before but I could not find any solution to this problem either in the wikis or in the list archived. If someone has found a solution before please just tell me where I can find that info..thanks :) I am using iaxComm to call other people who are either using SIP or also IAX clients, like me. All of us are connected to the same asterisk server.

Hello! I'm looking for TEXT sending over IAX2, more precisely sending text messages between IAX2 softphone and asterisk. Currently I'm trying iaxComm and I was able to send a text message from asterisk to iaxComm (with AGI SEND TEXT). After some searching I got some questions: 1. is it possible to send text messages during a call (established or during ringing)? 2. is it possible to send

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

Hello, I am attempting to use IAXComm as an end-point for my Asterisk instance. I have setup an entry in MySQL (using RealTime configuration) and am able to dial-out with no problem, although I notice this notice on the console of Asterisk: Jan 18 21:01:53 NOTICE[22491]: chan_iax2.c:4307 register_verify: No registration for peer '10000' (from 27.21.26.2) I then issue this Dial cmd:

Hi, I'm running Asterisk with HFC-S card connected to HW PBX in my office. When I make a call from home using iaxComm connected to Office Asterisk, the outgoing latency is about 0.25 sec, which is quite OK. But to incoming latency begins on 0.5 sec and in a minute it's about 5 seconds (!) and growing fast. The thing I really don't understand that the latency is asymmetric and

Good morning everybody, Can someone explain to me the interconnection between these four things: indications.conf, SetLanguage(), zaptel.conf and ring-back ? If there is any !! :- ) I am having this case where some users cannot hear ring back from a DeadAGI script and it seems to be interconnected to these items. These users are from the iaxfriends table, they _can_ hear ring-back from a

Hi *, This is my first message to this list, so I hope I am not breaking any rule with my post. My question is the following: can I establish a voice connection over an ISDN interface by using a bluetooth dongle to connect to the ISDN access point? Here follow the details: I have compiled and configured asterisk. Everything seems fine except that when I configure asterisk to use the ISDN

Guys.. Im trying to setup a fotphone using iaxcomm and when I dial that softphones extension, * complains of this: Mar 5 01:54:54 NOTICE[9962]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) Any hints?

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

I am trying to install the Modified Prepaid App. I have installed PostgeSQL, created the tables, etc. Make Install runs ok. The when I try to launch asterisk (asterisk -vvvvvgc), it fails to run. I get the following errors, 1st error: [app_prepaid.so] => (Prepaid Application) == Parsing '/etc/asterisk/prepaid.conf': Found Jun 16 14:27:27 ERROR[-1085267840]: app_prepaid.c:127

Hello All, I have been looking for a commercial version of an IAX2 Softphone for Windows but the ones I have came across (i.e. Iaxcomm, Iaxphone, Diax) do not seem to have an updated version since April 2004 in some cases. We looked at Firefly but we sent emails to Virbiage/Freshtel with questions and could never get a response from them. Has anyone got any recommendations for commercial

Hi folks an issue I don't understand. I'm running * stable 1.0.3 on public internet, with following iax.conf / sip.conf entries: iax.conf [100] type=friend username=Foo context=default auth=md5,plaintext,rsa secret=secret host=dynamic callerid="Foo" <100> qualify=no sip.conf [10] type=friend username=Bar context=default callerid=Bar <10>

--- Mike Mestnik <cheako911@yahoo.com> wrote: > Date: Fri, 25 Jun 2004 09:51:21 -0700 (PDT) > From: Mike Mestnik <cheako911@yahoo.com> > Subject: Re: IPP2P: Simular project l7-filter. > To: Eicke Friedrich <tady@gmx.net> > > --- Eicke Friedrich <tady@gmx.net> wrote: > > Mike Mestnik wrote: > > > http://sourceforge.net/projects/l7-filter/

Good day sir and Thank you Luke for replying. Whatever U told about the things like accounts on linux and windows machine and adding a user to smbpasswd with -a option but still it is not woriking. Please help me . Thanks in advance. --- Luke Roberts <Luke.Roberts@isispc.com.au> wrote: > Hi Prakesh, > > Do you have linux user accounts to match your > windows

ah. I was only talking about removing support in the winamp2 and xmms plugins. the decoder libraries will still be able to skip over/ignore id3 tags as before. I think AudioReQuest and PhatNoise must be using their own code to read id3 tags, which won't be affected. Josh --- Steve Vasquez <steve.vasquez@request.com> wrote: > Hey Josh, > > We currently use id3 v1/2 in the

I've turned on debug in a (IAXComm based) soft phone. I see the phone sending pings to *. I see * getting the pings. For some reason, with iax2 show debug, I never see any response on the console from *. However, the phone shows a response with INVAL. Seems like an odd response to a ping request. I believed it should get an ACK. Is that wrong? If I should get an ACK, what could I have messed