similar to: QuickNet Internet PhoneJack problem

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi, all. On a lark, I have gotten Asterisk 1.0.2 (from Debian testing) up and running, but I have found one problem when I try to use it with Free World Dialup: Dialing doesn't work properly. I have everything else working; it receives calls, ringing my phone and everything, but when I try to dial using the configs found on FWD's site for Asterisk at this URL:

waited for the aroma of burnt electronics. There wasn't any so I went to the next room and plugged in a telephone on the wall outlet. I picked up the handset and it rang my asterisk box. I dont have any phone service. The phone is working fine and have used it for hours listening to podcasts. And I can plug it to any phone in the house. Now I am thinking if I can plug another phone

Sorry, if this question has been asked before. I have redhat 9 and asterisk installed. I would like to know how can i make work the phonejack with asterisk.

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

The device is seen in linux pnp: isapnp: Scanning for PnP cards... isapnp: Card 'Quicknet Internet PhoneJACK' isapnp: 1 Plug & Play card detected total and I've installed the drivers from the openh323 dev... but I can't get * to see it. Does anyone have experience with this? THanks. -Dave. -------------- next part -------------- An HTML attachment was scrubbed... URL:

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

My thanks for previous help on fixing IXJ issues in 1.2.40; I now have problems with a just-built 1.4.35 on the same host: [Aug 18 17:26:48] WARNING[27209]: app_dial.c:1298 dial_exec_full: Unable to create channel of type 'Phone' (cause 0 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) O/S: Linux 2.4.27; IXJ driver for Linux Rev. 3.5, gcc 3.01 I applied the patch for

If you have any quicknet cards you are not using, I may be interested in them. I'll discuss terms after I know what you have. For sake of high shipping costs, I'm not interested in overseas shipments to the United States (where I live). My best resources will be for those that have PCI PhoneJacks, or PCMCIA CardJacks. Please reply to my email address, and not the mailing list.

Hello, I have ISA card LineJack. I could not find any information if this card can work as fxo with Asterisk. If it can work, can somebody point me how to install it on my Asterisk box. Or maybe there is some documentation about it how to install LineJack. I will be very thankful for any help. Regards Bartosz Jozwiak ------------------------------------------------- This mail sent through IMP:

Hello All... I have searched in the archive and also followed Zara's instruction on getting incoming calls to work with Asterisk...but I still can't get Asterisk to answer incoming call on Linejack's LINE port. I attached a phone set to the PHONE port, and telco line to the LINE port on the Linejack(ISA) card. I have downloaded, compiled and installed the newest driver for

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

Perhaps this will help... I have a phone connected to a QuickNet PhoneJack card. When I pick it up, I get a dial tone. When I dial a certain number of digits, the call is processed by Asterisk. The question: How does Asterisk determine how many numbers to let me dial? I'm banging my head against the desk here... _9XXXXXXX lets me make an outbound call, but _9X. only lets me dial 9 plus

How will this fare? I am planning on putting an asterisk box for my brother in the Philippines but they only have dialup internet. I want them to be able to use a telephone set on a phonejack or linejack card and call me and vice versa via VOIP. My setup in the US is working already with a broadband cable connection. I am thinking that dialup may not work because of the bandwidth required