similar to: Total newbie here looking to do a VoIPconference call?

Come to think of it since the DTA310 uses DNS to find the SIP server, you could setup a DNS cache and override the DNS entry for what packet8 uses (proxy2-eqix-sjo.packet8.net : 15062, over here) to point to the IP of your own SIP server? Kind of a hack but it should work as long as it's running on port 15062. I am very new to this so I don't know if there's a port standard for SIP

Hello. I am looking for a simple Asterisk billing solution. I expect about 50-100 users (a mix of IAX and SIP) through 3-5 outgoing providers (all IAX). I need something that can handle monthly fees and per call charges (depending on destination, obviously), and should provide a web interface for customers and administrators. Something that can tie in to one of the existing management GUIs

This is somewhat related to my other query on the list regarding NAT traversal. I have heard many times that IAX is "NAT-transperant". I am unsure how it accomplishes this. I do know that SIP works like this: your SIP device send a request to the SIP server (usually on port 5060) with whatever command. The SIP server respends to your device's "apparent" IP and port (this

Hello. I have an * server set up on a public IP. I have SIP clients at three different locations, all behind NATs. I have all the SIP users set up this way: [user1] type=friend username=user1 secret=password1 callerid="User 1"<101> host=dynamic qualify=yes context=outgoing All three SIP clients are configured to use STUN (using stun.fwdnet.net:3478). Furthermore, I have

I am looking to help out my company find a more budget conscious but reliable way to hold conference calls between 5+ people. 4x a month we hold several hour long conference calls during non-business hours. All of the employees have high speed internet. Currently we dial up an AT&T conf using regular analog phones. I don't have a great grasp as to what Asterick is capable of, but my

I saw these adapters on eBay. 2.5mm stereo jack to modular RJ-9 jack. I think original site is http://www.ciscoheadsetadapter.com Mike >Nabeel, > I am very interested in what you came up with for a 2.5mm to RJ-10 > adapter. > >I played with every combination I could think of but the best I was able to >come up with had a echo of the far end voice back to the far end.

I'm trying to get asterisk working w/ packet8 (incoming and outgoing) and a dta310 so I can have more control over voicemail. I've looked at the data stream coming from the dta310 and from packet8, but I haven't managed to get the phone to actually place invites through asterisk. On the asterisk end with chan_oss.so, I can make it dial and I hear ringing and the first second of

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last

Hello. I have my * server set up and working perfectly. I wanted to allows calls to sip:nabeel@sip.myserver.net. In sip.conf, I have: [general] context=default Also, in extensions.conf, I have: [default] exten => myname,1,Goto(internal,nabeel,1) However, when I make a call using a "Direct Dial IP" account in X-Lite, I get the following error in *: Failed to authenticate

Hello. I am having an issue where sometimes the cheapest provider for certain international destinations is not always reliable in completing calls. However, there is not problem once the call is made (i.e. no lag or echo or anything). The way I have it set up right now (for example) for Dar es Salaam, Tanzania is: exten => _925522XX.,1,Dial(IAX2/livevoip/011${EXTEN:1}) exten =>

> Many thanks Julian. Are you looking for the pinout for a single plug 2.5mm (cellphone) headset or a dual plug 3.5mm (computer) headset? -- Nabeel Jafferali Tel: +1 (416) 628-9342 Toronto +1 (646) 225-7426 New York FWD: 46990 Email/MSN: nabeel<at>jafferali.net

**** DRAFT **** DRAFT **** DRAFT **** DRAFT **** I've been using the DTA310 from Packet8.net for a couple of weeks. The DTA310 is about $130 without the Packet8.net VoIP service. It only supports SIP. On the back of the DTA310 is a power connector (power supply is provided with the product), a 10/100 Ethernet port, an FXS port, and a reset button. The front of the device has LEDs for

Hello. I picked up a couple of IAXy's for testing. Unfortunately, I read the negative comments only after I bought 'em :( Regardless, I provisioned one unit using my local Linux computer. Now, I'm trying to set it up to provision using the remote * server whenever it tries to register, but it seems I need to know the "service identifier" for the specific device. I can't

> http://www.mixdown.ca/~andrew/dump/threaded_email.png is what > a mailing list looks like to most people, and you can see why > replying to a message, erasing its contents and starting an > entirely new email about a different topic is frowned upon > (yours is the highlighted message). I know this is OT, but can you recommend an email program for Windows that does something like

> I would like to have all SIP phones to work on prepaid basis > and without need to dial any access number, instead I would > like to use the phone as normal dialing only the destination > number, for example 00464090510. I use the AccountCode for authentication. This is how, for example: exten => _00XX.,1,DeadAGI(astcc.agi,${ACCOUNTCODE},011${EXTEN:2}) > Once the call is

I have got my first * server set up and serving users in three different locations over the Internet. This is currently a test setup so I am experimenting with the different features of *. When I set up asterisk, I only checked out the Stable source of Asterisk from CVS, and compiled it. I did not download nor compile libpri or zaptel. Now, I have internal calling and calling through my IAX

Hello. I've set up a X100P and got it working. Now, I need to set it up so that it checks if the line is being used before attempting to make a call on it. I tried: exten => _NXXNXXXXXX,1,ChanIsAvail(Zap/1) exten => _NXXNXXXXXX,2,Dial(Zap/1/${EXTEN}) exten => _NXXNXXXXXX,102,Dial(IAX2/voipjet/${EXTEN:1}) but that only goes to 102 if another device on the * server is using the Zap

> 9105551212 => 1234,Gary Carr,email@domain.com,attach=yes Syntax is: Mailbox => password,Name,email,pageremail,options So, that should have been (added delete, it's a good idea if you're attaching). 9105551212 => 1234,Gary Carr,email@domain.com,,attach=yes|delete=yes -- Nabeel Jafferali Tel: +1 (416) 628-9342 Toronto +1 (646) 225-7426 New York FWD: 46990

Before I start, I just want to say this is not necessarily a problem with ASTCC, but may be a problem the way I have set up ASTCC (and possibly the way others have set it up as well). The issue is that ASTCC tries to match the pattern *anywhere* in the called number, not necessarily only at the beginning. I have set up ASTCC Routes like this: 1800 Tollfree Trunk1 0 0 100 1416 Canada Trunk2 0 0

Just upgraded to the current stable ver. when I start asterisk with -vvvvvcg I get the following error [pbx_loopback.so]Dec 23 19:25:33 WARNING[1633]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_loopback.so: undefined symbol: pbx_substitute_variables_varshead Dec 23 19:25:33 WARNING[1633]: loader.c:440 load_modules: Loading module pbx_loopback.so failed! Asterisk