similar to: AS5xx0: SS7 and SIP?

Hi, Would just like to inquire if anyone here has a setup of asterisk to send traffic to AS5400 connected to an SS7-PRI.? this is more of a AS54 question, as i've been reading and i always stumble upon PGW2200 as a requirement to handle SS7 signaling on the AS54. Has anyone able to send calls from asterisk to an as 54 with SS7-PRI without PGW2200? TIA Regards, Nhadie --------------

>I spoke with someone today who is interested in an IP Centrex solution that >starts with about 3500 extensions in a multi-tenant application. And >growing from there. > >I'm wondering about scalability of Asterisk. I'm trying to put my head >around how to put the whole thing together, if it can be put together. > >The nice thing about it is that if I can show

I'm confused a bit about the following and was hoping to get some answers on this group - What is exactly implied when we say asterisk can connect to a PSTN. Does it mean connecting to the PSTN via PRI/T1/E1? If yes, then I assume asterisk does not need to do any SS7 signaling and all it does (playing the role of a PBX) is to connect to a Class 5 Switch at the CO. Is this a correct statement?

Thanks Brian, and thanks again for the included definitions <grin> - that helped too. Your comments are really helping clear many questions. I suppose our intensions are to become an IXC. So if my local carrier is sporting old technology, they'll provide TDM services. So if I understood you correctly, the "in-band signaling" is typically SS7, and the alternative is typically

Hello.. I have a customer who wants to connect 2 PBX's over IP.. The setup should look like this: [PBX] <-- SS7 --> [Asterisk] <-- IAX --> [Asterisk] <-- SS7 --> [PBX] Since there are no SS7 cards , I was thinking at a way of carrying the E1 data as bulk...Can I do that ? How ? Is possible a scenario like this ? I'm thinking of IAX because I don't

I thought everyone should know this. Jorge, After reading your page in the http://voip-info.org/tiki-index.php?page=Asterisk+SS7 please advise Your U.S. customers that SS7 is not done the same way as in the rest of the world and the requirements are different. The U.S carrier's require 2 redundant links. I know this first hand because we run an SS7 network. CARDOSO Jorge Miguel wrote:

> > >On Thu, 2003-11-13 at 16:50, Freddi Hansen wrote: > > >>>> >Freddi Hansen wrote: >>> >>> >>>>> >> with boards from Aculab, we are replacing Aculab boards with Digium >>>>> >> boards BUT we would need more >>>>> >> Digium boards IF we could use both Digium and Aculab cards in

When are 'we' going to have this solution Steve? :) You keep talking about it, and we keep asking when it's going to come about. I know myself, SS7 will be a make or break for our continued use of Asterisk. Even if we had some price indications would be good, and/or a timeframe? Don't want to seem pushy, but it's been on the cards for quite some time now. Ben -----Original

Dear all, Do you have come acrross with this issue. My ss7 link get fluctuating. It use chan_ss7 version 1.0.95-beta. I have 8 E1s running on a DL380 server with Digium E1 cards ( 4 port cards). This enable to have calls from sip to ss7 and vice versa. However ss7 links are not stable. linkset siuc, link l1, schannel 1, sls 0, NOT_ALIGNED, rx: 1, tx: 2/4, sentseq/lastack: 127/127, total

I'm making outbound calls by placing call files in the asterisk outgoing directory. At times, the call would be hung by SS7 without even attempting (due to error in the outgoing number). I get the following on console: -- Attempting call on ss7/9297210213 for s at croom:1 (Retry 1) -- Sent IAM CIC=22 ANI=9134904821 DNI=9297210213 RNI= -- SS7 hangup 'SS7/callserver/22'

Hi, there are still some questions to be answered by OpenSS7.com in order to decide, whether E400P-SS7 is a good choice for the asterisk SS7 support. In the meanwhile I'm also in negotiations with another manufacturer (whose name I currently may not tell due to a NDA) of SS7 hardware, who gets likely persuaded to offer a cheap SS7-PCI-card which would be suitable for asterisk. Asterisk users

>Freddi Hansen wrote: >> with boards from Aculab, we are replacing Aculab boards with Digium >> boards BUT we would need more >> Digium boards IF we could use both Digium and Aculab cards in the same >> server. The reason being that >> TE410P doesn't support SS7-ISUP so we continue using only Aculab cards >> in the servers that must support >>

Hi Sangoma a104 card have in product specyfication support for Line protocol SS7 , http://www.sangoma.com/products/p_aft-104-specs.htm [..] Line protocols Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC. [..] Anyone of you guys use line protocol SS7 for E1/T1 termination in asterisk ? As far I know asterisk don't have support for SS7 signaling, but my telco wants to setup

Hello on Behalf Of idont know, Sangoma has a Media Gateway solution via SS7. They I believe are the only ones capable of connecting Asterisk via SS7. You may want to check them out. Heidi -----Original Message----- From: asterisk-biz-bounces@lists.digium.com [mailto:asterisk-biz-bounces@lists.digium.com] On Behalf Of idont know Sent: April 6, 2006 10:29 AM To: asterisk-biz@lists.digium.com

Hi all, I'm being requested to deploy an?IVR service?using SS7. I've deployed Asterisk before using ISDN connection, but never with SS7. Can anyone explain me the different between using ISDN and SS7 ? What need I do now to change to use SS7 ?. Many thanks, Giang -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

Hello, Is it possible to transfer ss7 signaling over an FXO interface. I need to setup an ss7 test system composed by two Asterisk based IP-PBX systems with anlog interfaces only (FXO and FXS). I want to know if it is possible to connect the two IP-PBX as following: - FXS interface in PBX1 -----------------> connected to -----------------> FXO interface in PBX2 =============>

We'd be more than willing to test :) Our PRI provider has been trying to push us over to SS7 for ages. So we'd be very interested in assisting you. Ben -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Steve Underwood Sent: 12 January 2005 12:49 To: Asterisk Users Mailing List - Non-Commercial Discussion

Hi, Does Asterisk support SS7? Google shows an old new post from Feb. 2002 stating that OpenSS7 would help add SS7 support to Asterisk, but presently OpenSS7 seems to be dead and I can't seem to find anything about it at Asterisk or Digium's sites. What happened? -- Regards, Tais M. Hansen ComX

hi some time ago, I asked the list of a good book for learning ISDN and SS7. I don't need to know how to write a channel driver or something; I just want to know more about the possibilities and what's really sent back and forth. I was told the book "ISDN and SS7: Architectures for Digital Signaling Networks" by Uyless Black (ISBN 0132591936) was a good choice, but this