similar to: DIALSTATUS missing an important condition?

Displaying 20 results from an estimated 4000 matches similar to: "DIALSTATUS missing an important condition?"

2007 May 16
0
Passing dialstatus back through an IAX chain ..
I feel I'm doing something obviously wrong here and will kick myself when I see the answer!!! The scenario: SIP phone -> Asterisk1 -> IAX -> Asterisk2 -> IAX -> Asterisk3 -> PSTN So I place a call from the SIP phone. A1 picks it up and forwards it to A2 which forwards it to A3. A3 sends the call to the PSTN. I control A1 and A2, but not A3. When a call fails (for
2005 Sep 15
3
${DIALSTATUS} problems
Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status
2004 Dec 03
2
DIALSTATUS weirdness (CHANUNAVAIL instead of BUSY, NOANSWER instead of CHANUNAVAIL)
Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is
2013 Jul 03
1
SIP. Call-limit dialstatus
Hi all. We have a problem with correct dialstatus and cdr(disposition) when using call-limit. When call-limit reached dialstatus is CHANUNAVAIL and CDR(disposition)='NO ANSWER' -- Executing [0014 at sub_pbxdialco:49] Dial("SIP/1295-000001f8", "SIP/0014,12,tTkK") in new stack == Using SIP RTP CoS mark 5 [2013-07-03 15:22:27] NOTICE[29728]: chan_sip.c:6003
2015 Feb 27
1
603 Declined > Dialstatus Busy
Hello Everyone. In my outbound contexts, I'm using "${DIALSTATUS}" to fail over to other routes if the chosen route rejects the call. Now, My current scenario is if I get "BUSY" back from the first provider, I send a busy back to my customer. If I get something like CHANUNAVAIL (Like a SIP 503) I advance to the next carrier and attempt the call. This works
2004 Dec 04
1
more DIALSTATUS/HANGUPSTATUS woes with IAX2
Phone - TDM430P - home* - IAX2 - office* - PRI - Telco I dial a busy number from the Phone. Home* shows this in the CLI: -- Executing Macro("Zap/1-1", "dial-wu|2922004") in new stack -- Executing Dial("Zap/1-1", "IAX2/andrew@wu-ast/2922004||g") in new stack -- Called andrew@wu-ast/2922004 -- Call accepted by wu-ast (format gsm) --
2005 Jan 21
0
Manager API on gives the DIALSTATUS of the first picked up channel?
Hi All! Let me explain the problem. When using the Originate? command from the manager api, the dialstatus variable returns results? for whichever phone picks up first, and in this case it is the IAX/2? connection. It doesn't matter if Zap/G2/XXXXXXX is set as the channel,? or an extension either. What I am ultimately trying to do is get the? dialstatus of the Zap/X/XXXXXXX channel, i.e.,
2004 Nov 20
1
IAX Dialstatus
Hello, I've got some SIP clients, and an IAX2 long distance provider. Ideally, when a the dialed number is busy I will hear a busy signal. Instead, I get Congestion even though * knows it's busy. Is this a bug or am I missing something? The dial plan, in basically this Dial(IAX2/user@provider/19995551234,,) Goto(failedcall-${DIALSTATUS}) failedcall-CONGESTION plays congestion
2005 Jan 21
0
Help DIALSTATUS gives ANSWER when line is BUSY?
I'm running Asterisk CVS-v1-0-12/20/04. I'm using PHP with Manager API Here is the code: #################################################################### # Make call #################################################################### $socket = fsockopen($ask_db,"5038", $errno, $errstr, $timeout); if (!$socket) { echo "$errstr ($errno)<br /\n"; } else {
2005 Feb 27
1
DIALSTATUS with X100P
I'm having an issue with my current configuration. I have a single PSTN line connected to an X100P and a couple IAX trunks to NuFone and VoipJet. When I make an outbound call it doesn't properly detect if my PSTN line is in use with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY instead of CHANUNAVAIL. I
2009 Sep 15
0
1.6.2.0-rc1 intermittent voicemail problem ?
1.6.2.0-rc1. I am having trouble with voice mail intermittently not working correctly on CHANUNAVAIL. (it may happen for other statuses too, haven't checked). Basically here's what happens: -- Executing [1651xxxxxx at mydids:1] Macro("SIP/ipkall-trunk-14838bc8", "phone,1651xxxxxx") in new stack -- Executing [s at macro-phone:1]
2006 Jan 21
0
Dialstatus Oddity in 1.2
Hello all, I am working on a creating some intelligent failover dial-plan logic and I'm running into something that I'd like some feedback on. Basically, it appears that if you place a call to an IAX2 peer that refuses the connection, or is unavailable, a NOANSWER dialstatus is returned. Example: -- Executing Macro("IAX2/cubix-19",
2006 Apr 07
2
DIALSTATUS for Multiple Dialled Numbers
Folks, When I have a dial string like this: Dial(SIP/3254101&SIP/3254102,20,tr) and I want to check the ${DIALSTATUS} variable after the dial, how do I know which number I am getting the variable for? And, what about this? Dial(SIP/3254101&SIP/3254102@proxy1,20,tr) What happens in that case? How can I get the ${DIALSTATUS} variable for EACH NUMBER dialled? Thanks, Doug.
2009 Jun 29
0
FW: re: Asterisk Outbound with Failover, alarm notification, dial status and hangupcause capturing to CDR from Dialplan
Managed to implement this on asterisk v1.4.24.1, Also, Hangupcause updating to user field. However, this only works on the edge of my voice network (demarcation point) It does not work on my internal routing boxes as I use IAX to route between remote sites. I was thinking of using some sort of SIP variables to transport these results over the IAX trunk.. Any bright ideas folks???
2005 Feb 12
0
Outbound calls on a busy Zap/1: BUSY vs. CHANUNAVAIL
Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired
2009 Jun 12
2
Current possible values for DIALSTATUS?
Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:
2004 Nov 30
0
No voice when I dial out
I can dial from 601 to a public number. The public number rings. I pickup and hear nothing, while on 601 it keeps ringing. (BTW, is it right to say "ringing" on the active phone?) The *CLI> doesn't show me anything useful: Executing Macro("SIP/601-8238", "dial-pstn|88097880|") in new stack Executing SetGlobalVar("SIP/601-8238",
2005 Sep 14
0
Dial Application Return Codes - Help needed
Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status
2009 Sep 22
2
Problem with dialplan -> gotoif ?
Hi This is the output from show dialplan dial-sipmnf-sippt-pstn [ Context 'dial-sipmnf-sippt-pstn' created by 'pbx_config' ] 's' => 1. Verbose(1,Dialing ${ARG1} on mnf pt pstn) [pbx_config] 2. Dial(SIP/${ARG1}@${SIPMNF},${ARG2},${OUTBDIAL}) [pbx_config] 3. Set(GLOBAL(FOUNDME)=${DIALSTATUS}) [pbx_config]
2006 Apr 25
1
CHANUNAVAIL, busy and congestion
Greetings to all, I ma having a problem with channel variables on a couple of our Asterisk boxes. Here is the setup. Asterisk on customer's site (1.2.5), using IAX to our external GW (1.2.5), IAX to PSTN GW (1.0.10), E1/PRI to PSTN. On the External GW, we also have an IAX trunk to a VOIP provider if for some reason the E1 is down. If the DIALSTATUS is CHANUNAVAIL, which should be