similar to: Doubts regarding g726 - 16 bits setup

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

Hi, I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri. The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced". When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see: [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) ==

With sipura (I tried this with both the 3000 and 841) set to prefer the g726-32 codec, a call from the sipura to asterisk will use g726. Asterisk sip.conf has: disallow=all allow=g726 allow=gsm allow=alaw When the call is from asterisk to the sipura, asterisk will not use g726. It ends up using alaw. I usually use stable but I tried this with head too, and same thing happens. Anybody know how

Hi everybody, A customer requires G726-40 with Asterisk... I know G726-32 is pseudo-standard, but he definitely wants G726-40... Is there any (easy) way, to integrate G726-40 into Asterisk? Has anyone done this before? Any hints? Please help! Due to a misunderstanding, my product manager already offered this to the customer and now i do not know how to do it... Thanks a lot in advance,

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

I am able to use sox to convert audio files from ulaw to wav (MS ADPCM), is there a way, using sox or another command line tool, to convert them to g726 ? ( g726-32 since it is supported by * ) tia, -baji. --

Hi All, I am happy to offer $1000USD for the fix of the g726-32 in Asterisk. What's wrong with it? It currently gives a very distorted sound as though the gain is set to high. Lowering the gain on endpoints helps but this is not a fix just a poor workaround. We require g726-32 to be of the same quality as the Asterisk g711 implementation. As the developer who fixes this issue you will

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

>So in my sip.conf I put many variations of what I thought should go in >there, >finally including (to no avail): I have had to play this guessing game as well with other codecs/config file settings in general. And I think this email touches on something that has been troubling me for sometime. >You should allow "g726" only. I think one problem area of documentation

Just checking the transcoding on our Asterisk boxes and I get the following results. I have the g726, ilbc and lpc10 formats and codecs enabled in 'make menuselect' so I dont understand why its showing as no translation path. Any ideas? I am running certified-asterisk-11.2-cert2 Thanks Gareth > core show translation paths alaw --- Translation paths SRC Codec "alaw"

Hello Happy New Year! I succesfully installed the Ports of Zaptel BSD 1.4.0 and Asterisk 1.4.13 (that's the latest in the Ports). To save CPU, I'd like to play PCM WAV files instead of eg. GSM. Per... www.voip-info.org/wiki/view/Convert+WAV+audio+files+for+use+in+Asterisk ... I recorded a sample of my voice using XP's Sound Recorder, then ran the following : sox test_wav.wav -r

What is the configuration of H323.conf and openphone in order to run openphone and asterisk together ?

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Dear list, I'm working with a large data set, where I grouped several species in one group (guild). Then I reshaped my data as shown below. Now, I just want to have "Rep" only as 1 or 0. I'm not being able to change the values of rep>=1 to 1... tried many things and I'm not being successful! > melting=melt(occ.data,id.var=c("guild", "Site",

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

When I load guild wars through wine it finishes connecting to arena net but then disappears. I can hear the guild wars music playing in the background but there is no window showing guilds wars. It is not on my second desktop. I'm running wine 1.01 Ubuntu 9.04 When I look at my processes running GW.exe is listed as pipe_wait. Any ideas? I already tried uninstalling both guild wars and

Hello all I'm totally new to linux and wine so please bear with me. I'm using Ubuntu 10.04 and wine 1.2.3 I used the winetricks tool to get 7-Zip and Guild Wars. 7-Zip seems to work fine (I have a windows machine and Guild Wars works just fine) When I try to open Guild Wars first it says it's not responding then I get this: [Image:

In the mailing list archives, I found a message that indicates that the IAXy has the ulaw, alaw, and g726 codecs, but I cannot find anything official on Digium's site about it. The Installation Manual has an example iax.conf file that indicates the ulaw codec, so I know that one is good. But we are thinking about using the IAXy over a VPN, to replace our MultiVoip. alaw and ulaw are

Hello list, I have always though codec translation table is dircetly connected to system speed, utill i came across this: in my lab, i have 2 boxes, First box is an Intel Celeron 1.7 GHZ with 256M RAM: show translation Translation times between formats (in milliseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw