similar to: Group sip definitions?

[Shane Drinkwater] Daniel, I have the same probelm. These are the steps I did in a previous thread... Jim, I think I found another bug... I really seem to be in printer hell :(.... I found that windows 2k doesn't update its status "ready" or "paused" when used with samba. Here is what I did... 1.) enable all of the lpr/lpd queues. check em' with lpq... 2.)

I'm having a problem getting my queue to function as it should. After 20 seconds or so, it should prompt the user with a message "thanks for holding..... press # to leave a message or stay on the line to continue holding". I set up the "context" in the queues.conf file, so if a user presses a digit, they should be able to leave. But I get a SIP BUSY message. Here are my

Please see my extensions below. I will try to type you through this. In default, an extension 5149053538 is matched on. This fires a macro that determines what time is it, and resets a variable which is then used to call another macro to place a call. if the call is answered, and the far end hangs up, the dial macro exits, then the routing macro exits, and you are back to default. at this point

drivers on the server. If this is the case I suspect you may need "use client driver = yes" in your printer share. For details please see the manpage for smb.conf, but here are a few snips... use client driver (S) This parameter applies only to Windows NT/2000 clients. It has no affect on Windows 95/98/ME clients. When

Haven't heard any responses at all. Stumped? Or does it work for you and just not me? Please let me know if you can, thanks -------- Original Message -------- Subject: queuepause/queueresume and w2k machines, won't work Date: Fri, 09 Aug 2002 11:56:32 -0400 From: daniel.jarboe@custserv.com To: samba@lists.samba.org RH 7.2 linux, LPRng, and samba 2.2.5-1 rpm, security = domain using

Please help, I am having a problem with a Samba server I have attempted to move to a new Redhat 9 box (it was on Redhat 9 before). Here's the what I did: 1) I transferred the follwing files & dirs to the fresh RedHat box : /etc/passwd /etc/shadow /etc/group /etc/gshadow /etc/samba/* (the whole dir) /var/cache/samba/* (the whole dir) 2) I stopped SMB services on the old box 3)

this just in -- who can take it? (Mau??) I have no access to a Mac to even test the bug right now.. ___ Dan Miller (++,) Founder, On2 Technologies <p>-----Original Message----- From: devbugs@apple.com [mailto:devbugs@apple.com] Sent: Tuesday, June 17, 2003 2:21 PM To: Dan Miller Cc: gao@apple.com; Doug Mcintyre Subject: Re: 3274253-docked On2 movies don't draw the video frame

I have quite successfully set up the Services button to work on the 7940 running SIP. I have a metric-imperial converter, a foreign exchange rate calculator, a calendar etc available to users. The XML is really fussy though. Simon -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Rich Adamson Sent: Thursday, 1

Hi all, Doing some work with a puppet 2.7.14 installation to see what''s new and needs to be changed, however i''m seeing unexpected behavior with my manifests, so my external node directory isn''t being imported. This is on a rhel 5 server with the puppet rpms from yum.puppetlabs.com, but the cilent machines is based on fc17 beta with 2.7.13 rpm (which is with that

Greetings, It appears that some time ago, another user or two experienced similar trouble interacting w/ an ata186. For the sake of reference: http://www.mail-archive.com/asterisk-users@lists.digium.com/msg00788.html It seems like this issue was fixed at the time, any quite possibly this problem here is unrelated. In any case, I'm using a debian-testing system, gcc3.3, -O2 (just to be

On June 5, 2011, we migrated from Mantis to Jira as the issue tracker for Asterisk [1]. We temporarily left Mantis running in read-only mode to smooth the transition. At 15 months, temporary has turned into semi-permanent. As a part of other infrastructure changes we are making to the community services, we will finally shut down Mantis for good. We will update our DNS servers on the morning of

On June 5, 2011, we migrated from Mantis to Jira as the issue tracker for Asterisk [1]. We temporarily left Mantis running in read-only mode to smooth the transition. At 15 months, temporary has turned into semi-permanent. As a part of other infrastructure changes we are making to the community services, we will finally shut down Mantis for good. We will update our DNS servers on the morning of

Now that I have winbind working, life is good. However, I've hit upon a real kick in the pants. As you can see from my email address, we have a convention here of usernames being firstname.lastname. So, when I go to change the owner ship of a file: $ chown chris.palmer myfile Linux thinks I mean user chris, group palmer, and says "invalid group" (there is no palmer group,

Hello list, I'm not sure whether this is bug worthy or just my own insanity. I'm using 6.4p1 packages from Debian jessie and wheezy-backports. I like VisualHostKey, although it may not add any protection (other than not trusting ones own known_hosts file?), I've become accustomed to it as it seems that extra neurons fire when I log into a host and get a visual cue of what looks like

Dear All The setup is te110p with an 8 channels PRI to make and receive all calls. SIP phones throughout the company. TDM400p with 4 FXS modules to send/receive faxes and make credit card transactions. I have an analogue phone on the tdm400p for testing. I can receive calls to the exten. There is a dialing tone. However, when I try to make a call I get a busy signal. Asterisk stated busy then

I just updated libpri 1.4 on my system to the latest from that branch and my QSIG connection to an NEC SV8300 stopped working. The trace showing the problem is below: q931.c:5640 q931_connect: Call 7168 enters state 10 (Active). Hold state: Idle > DL-DATA request > Protocol Discriminator: Q.931 (8) len=21 > TEI=0 Call Ref: len= 2 (reference 7168/0x1C00) (Sent to originator) >

https://bugzilla.mindrot.org/show_bug.cgi?id=2194 Bug ID: 2194 Summary: Supress VisualHostKey message when re-keying Product: Portable OpenSSH Version: 6.4p1 Hardware: Other OS: Linux Status: NEW Severity: enhancement Priority: P5 Component: ssh Assignee: unassigned-bugs at

Running samba installed from rpm 2.2.5-1 on rh 7.2 system... security=domain with winbind to NT pdc, LPRng Trying to pause printing without specifying a queuepause command I get: You do not have permissions to modify the settings for this printer. If you need to change the settings, contact your network administrator. With queuepause command = /usr/sbin/lpc stop %p queueresume command =

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

2.2.6 installed from rpm on rh 7.2 system... I'm trying to use pam_winbind and apache's basic authentication to restrict access to certain directories served by apache. It does work, but when I enter a wrong password I get this error in log.winbindd: Plain-text authentication for user jarboed returned NT_STATUS_WRONG_PASSWORD Is there a way that pam_winbind.so can encrypt the passwords