similar to: NewBie Question Modem Telephone -PSTN

Hi, all Can a normal PCI modem be used to provide PSTN interface? I have seen modems that have answering machine capabilities, so there should not be a problem sending voice through them. Certainly, modem will be cheaper option then dedicated cards. Am I missing something? /*******************************************************/ Rudolf Ladyzhenskii Senior Design Engineer Open Networks Pty.

I have an analog modem and a TDM31B and one outside line. I want to use the modem to dial out on demand for a PPP network connection and also use the outside line with the TDM31B. I am willing to have the modem work at 28.8Kbps. I want a lock of some sort so that voice calls do not break in on data calls and vice versa. My first thought was to have the modem connected to the TDM31B and have

hi, i have a external usrobotics modem, i want to use it with asterisk to interact with the pstn, what i have to do? thanks, -- santiago jos? ruano rinc?n administraci?n servidores y servicios de internet red de datos universidad del cauca -----BEGIN PGP MESSAGE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org

Hello Asterisk-users, I am new to Asterisk. I got SIP Calls to work between two computers using a soft phone and asterisk in the middle. Since then, I have been trying to get my soft phone to make a PSTN call with terrible failure for about two days now. On Windows using asteriskwin32: I have a soft modem (Agere HDA Modem) in my laptop. Windows' default dialer is able to make a PSTN call by

Hi all, I am trying to install asterisk on my system, the compiplation and installation process all seem to work fine (make ; make install ; make samples). But astersik fails to start. Is the sample configs not supposed to work out of the box? Even more confusing, it seems to fail at different points every time I start it, but this is probobly because of threads starting differently or something?

Do i rely need a pbx-card to use astersik for voicemail-system? Or can i only use my internal pci-modem A-link

Hi, here what i have: [2001]--[Asterisk]---[ISDN-Trunk]---[PBX]--[8004] Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. Dialing from Astersik extension 2001 to PBX extension 8004 via ISDN Trunk gives me the following error, -- Executing Dial("SIP/2001-8a8e", "Modem/ttyI0:998004|20|r") in new stack

Hi all, I like to have a dial in modem on my toll free number so that when I or my employees travel, they can always get in for net access to read email if no better method is available. Right now, my Panasonic KX-TD1232D PBX receives the call on a POTS line and routes it to an analog modem. The speeds achieved are around 24 kbps due to the digitization of the KX-TD1232D introducing

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

On Sun, Jul 12, 2020 at 3:39 PM Kay Schenk <kay.schenk at gmail.com> wrote: > > On Sun, Jul 12, 2020, 12:31 Mauricio Tavares <raubvogel at gmail.com> wrote: > > > On Sun, Jul 12, 2020 at 3:15 PM Kay Schenk <kay.schenk at gmail.com> wrote: > > > > > > Hello all-- > > > I'm in a bind trying to reset an older Nether DSL modem. I did a

Hello, I am currently trying to configure an Asterisk (current 1.4) box with a TDM410P and 2 FXS as well as 2FXO modules. An analog modem is directly connected to the TDM (port 4) which itself is directly connected to the PSTN (port 1). [V.34 Modem]-----[TDM on Ast. 1.4 TDM]---PSTN When I try to establish an analog modem connection with this setup, the modem is unable to connect to the remote

Dear All Please be informed that I checked for the presence of internal modem on my CentOS server , as the followings : #dmesg |grep -i modem #lspci |grep -i modem #lshw |grep -i modem According to the output , it seems that my CentOS client does not contain internal modem . So I decided to add external USB modem and make use of an PCAnyWhere like application that enables for Remote PC Access .

Modem connect speeds on calls through * seem to be lower than calls made through the telephone company lines or our old Rolm PBX. All data calls have 2 wire analog modems on both ends. For my set up I have channels of a Zhone channel bank tied to 2 modems. The Zhone channel bank interfaces my * server with a T400P card. modem --- Zhone Channel bank - * via T400P card - Zhone channel bank -

El 13/7/20 a las 0:50, Kay Schenk escribi?: >> With your current setup in mind, do you know the modem internal >> IP? With that, set your computer's IP to be in the same network, >> verify the default route, and see if you can reach out to the modem. >> > I did this with a new network profile and activated it, but no good. I need > some info/tools on

I use Speex with dialup modem users. Even if the dialup modem is "56K", you should assume that upstream bandwidth available is only 20-30kbps at the most. I use 16kHz wideband mode and VBR quality 2. Also, I send 80ms (4 frames) per packet, because there is an overhead of approximately 33 bytes per packet due to UDP (8 bytes), IP (20 bytes), and PPP (~5 bytes) headers. If you

I am playing with a USR (us robotics) USB modem model 5637. in the past I used internal modems and had no issues. One this unit I plugged it in, dmesg says its recogized. I did "ln -s /dev/ttyACM0 /dev/ttyS4" this works. I then did "cu -l /dev/ttyS4" type "AT" and I get OK... looking good. When I "ATDT my number" I get a connection at 1200 baud (which I

There are two stages in the process of getting callerID information from a standard modem, to be used in Asterisk. The first stage is actually capturing the information from the modem, the second stage is importing the captured data into Asterisk. Capturing the caller ID details from the modem I will presume at this stage, that you have a modem that supports caller ID and it is installed and

Hi, I'm having trouble with an IRQ conflict I can't figure out how to resolve. I tried KDE (which is great), but this required the NVIDIA driver. However, this driver conflicts with my modem. If the driver is loaded, then the system locks up when accessing the modem. If I remove the NVIDIA driver from /boot/loader.conf, modem works fine. I tried moving the modem to different slots, but

Hi I'm trying to connect a USB CDMA modem (z010) to a CentOS 4.1 (kernel 2.6.9-11.EL) and I can't talk to the modem. I tried the same modem under Fedora Core 1 (2.4.22-1.2199.nptl) and it works like a charm. The only difference is /dev/ttyACM0 for CentOS and /dev/input/ttyACM0 for the Fedora. Any help would be appreciated. Tank's. Fernando Lan?a Some debug info: CentOS:

HI ALL; Is astersik enable to translate between different codecs. I have couple of SIP-UA , one with (a-law) and the other with (g729), registered with my astersik box.Can astersik translate between alaw-g729 and vice varsa. Regards mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: