similar to: WEP and CentOS 4

Dear All, I have this same problem on my ubuntu as in my Centos linux. when i use NetworkManager to connect to my NetGear Access Point with WEP security, the passphrase seems that do not make the correct KEY, so i had to check in the NetGear and enter it manually in EX mode, using iwconfig on CentOS and the networking utility in ubuntu. Ok, after this introduction this is my question. Do you

Hi All! I run in to problem, what described in some more place: http://149.20.54.209/showthread.php?t=39724 . The concrete problem is: when I use FreeBSD with WEP, there are no RX traffic received. So, when I probed a DHCP request, then here are no response from DHCP server. The OS is: FreeBSD 9.2-BETA2 (freebsd-stable).

CentOS4 standard installation. I see that KwifiManager doesn't support 128 bit WEP which I need for other machines on the network, which is a bit of a blow - and rather surprising really as security should be quite a consideration on an enterprise level system (NB RH!). Is there a workaround? An alternative way of configuring my Belkin F5D6020 ver 2 card? eg a cvs download that I can get

Hi, I have a IBM ThinkPat T30 a Cisco Aironet wireless internal in the laptop 802.11b only. It works great with open Acess points, but when i try to connect to encripted ones. I got the dialog box asking for the passphrase 128 bit, I enter it and after that i receive the dialog box again! Maybe my card do not support WEP or I am doing something wrong? Here is part of what i can see on

Have decided to give up on the embedded Broadcom 4312 wireless device in my son's Dell laptop. I get WEP open authentication to work, but nothing else. I was about to dump the bcm43xx kernel module and the bcm43xx-microcode5.fw firmware and work with the newer b43 module and associated firmware. However, he claims that at school, he has always had intermittent problems with wireless under

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

Has anyone had any experience with wireless LANs and Asterisk? We have and here are my impressions. We configured an Asterisk in the office as a precaution to see how it would work for our own retail customers. Our office is open space, about 800 sq ft. (20x40 area). We use Snom200 and Grandstream SIP phones. Using the latest Linksys wireless access point (WAP54g) and 3 wireless bridges

Hi Was able to communicate clearly with e60 and E61 with asterisk with new access point , even though the access point security setting was of ?opennetworks? , the previous one was of ?WEP? , I feel this was a major hurdle in communication , now I can clearly accept and make calls using Nokia E60 and E61 devices Next I will be trying to find out how to make this device work

I have a CentOS 4 running on a laptop with an orinico card. My Wireless access point supports 802.1x dynamic WEP keys, and I would like to try it in this mode. Unfortunately, its not clear to me on how to: #1: Configure free radius on a server to do the radius backend. (although I think I can solve this) #2: Configure CentOS 4 to use dynamic WEP keys. If anyone knows how to do either of the

OK, I've downloaded and unzipped the firmware files in ipw2200-fw-3.0.tgz - so I have 4 files: ipw2200-bss.fw, ipw2200-ibss.fw, ipw2200-sniffer.fw and LICENSE.ipw2200-fw, all of which I've placed in the /lib/firmware directory. Unfortunately, the instructions in README.ipw2200 and INSTALL are not clear as to what to do next. I'm using CentOS 5 on my (Dell) laptop so setting-up wireless

By default the installer will set the hostname to what the DHCP returns, exposing details of the machine where make-template.ml runs. Instead, force "unassigned-hostname.unassigned-domain" as hostname, so plays nicely with the hostname setting code in virt-customize. --- builder/templates/debian.preseed | 2 +- builder/templates/ubuntu.preseed | 5 +++++ 2 files changed, 6

I recently got a Pulver Innovations WiSIP wireless SIP phone to determine if we want to use them in our organization. Since the WiSIP phone arrived last week, I have had nothing but headaches. I do think I now have the problem narrowed down. I have spent a bulk of my time trying to get the WiSIP to work with a couple of Linksys WAP11 Version 2.2. I have met with no success in getting the WiSIP

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

Any ideas folks?? have installed RealPlayer10GOLD on CentOS 4, I have tried to uninstall it with the rpm -e command but I am being told it doesn't exist...when I try to download it again I am told that it is already installed! many thanks in advance _________________________________________________________________ Want to block unwanted pop-ups? Download the free MSN Toolbar now!

Hi! I'm messing about with an old Toshiba Tecra laptop. i've got wireless working well using NetworkManager and WEP. But I'm interested in finding out if it is possible to get WPA/TKIP or other WPA variants to work with that driver. According to dmesg, boottime diagnostics include: eth0: Hardware identity 0005:0004:0005:0000 eth0: Station identity 001f:0001:0008:000a eth0: firmware

Paul- I have a ZyXel Prestige 2000W. It seemed to be junk at first, (not saving settings, flaky network connectivity, etc.) But upgrading it to the latest firmware seemed to fix the issues. The only complaint I have with it currently is weak encryption. (64 or 128-bit WEP) YMMV. Brian > >Message: 1 >Date: Thu, 13 Jan 2005 10:34:45 -0700 >From: Paul Fielding

Hi All, After hours of reading and trials, I got the following setup working... 1. Dell Axim X30 PocketPC with 802.11b wireless using DHCP with Open WEP -- successfully connected to --> 2. Laptop with DLink Airplus DWL-650+ PCMCIA wireless with ndiswrapper v1.1 driver with network bridge (wired + wireless) and running a DHCP server listening on interface br0 (eth0 + wlan0) Here is the

I am using a Netgear MA401 with the wi driver, and am having trouble using wpa_supplicant to set static WEP keys. I have the wlan_wep.ko module loaded with wlan and wi built into the kernel. My wpa_supplicant.conf looks like this: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel network={ ssid="INTERNERD" scan_ssid=1 priority=1 key_mgmt=NONE

Hi there, yesterday I came across the "Vocera Communication Badge" and now I'd like to know if anyone here has played with that thing (or even just seen it in real life), and if a price tag can be found for this device? Too bad they don't use SIP... ;-( http://www.vocera.com/ http://www.heise.de/newsticker/data/tol-25.12.03-001/ Cheers, Philipp ** Wireless Specifications

After reading that someone had problems with 802.11i/WPA2, I tested my iwi device, too. 802.11i (as client) works, but disconnects about every five minutes briefly, which is nothing new -- I had the same issue with 6.2-RELEASE. In contrast to 6.2-RELEASE, monitor does not work. Kismet does not receive anything, while it does with ath or ural (even at the same time). dmesg with debug.iwi=2 is