Displaying 20 results from an estimated 1000 matches similar to: "OS Choice ?"
2004 Nov 28
4
Phone Selection
I'm looking at the Sayson 480i or the Cisco CP-7960. Which one would you
suggest and why please ?
Best Regards,
Alex Brecher
Visit us at http://www.Successfulhosting.com
<http://www.successfulhosting.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041128/8e282c51/attachment.htm
2005 Aug 20
2
Asterisk(*) on a Cobalt RaQ2?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Can Asterisk(*) be installed on this and if so are the setup
instructions any different?
I have a client that's asking.
Specs: 533Mhz, 512MB RAM, 10GB HDD, Cobalt 4 OS
- --
=================================
Joshua Abbott, Support Technician
http://www.successfulhosting.com/
Direct Line: PENDING
Phone: (866) 494-5096 x1207
E-Fax: (419)
2005 Aug 10
3
Hard deskphone via wifi?
Has anyone here ever tried using a wifi bridge to place a deskset in
someplace where there was no LAN drop? If so what hardware did you use
and was it succesful?
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist www.pixelpower.com
Pixel Power Inc. mgraves@mstvp.com
o713-861-4005
2005 Jan 03
5
Xorcom Rapid CD for Production?
Hi All,
The past day or so I've setup a new * server based upon the Xorcom
Rapid ISO. It did as promised; wiped the base system, installed Debian
OS, installed Asterisk with a dummy configuration. So far so good.
If I could get the config from my existing * server migrated to the
Xorcom box the I'd be ready to roll. Essentially, it would be the same
as I have now on Fedora Core 1, but
2004 Feb 01
2
Luxoncomm 3800 series FXO/FXS adapters?
Anyone here have experience with these devices? They would ppear to be
an affordable alternative to multiple X100Ps.
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist www.pixelpower.com
Pixel Power Inc. mgraves@mstvp.com
"Kick at the darkness 'till it bleeds daylight" - Bruce
2007 Aug 16
2
Seeking opinions: Polycom IP330 phones?
Does anyone online have an opinion on these? I've used 500/510/6001/601
models before. Need to know if these apparently lesser models can be
provisioned in the same way. Are end uers happy with them?
Thanks,
Michael
--
Michael Graves mgraves at pixelpower.com
Sr. Product Specialist www.pixelpower.com
Pixel Power Inc.
2003 Dec 17
2
Residential router w/ QoS support?
Did anybody ever come across an affordable, residential cable/dsl router
with support for QoS?
The ones I've seen so far (Netgear, D-Link and W-Linx) do not seem to
support it. I noticed that even email can damage a G.711 stream on an
128kbit uplink, leave alone file-sharing applications. I understand this
is strictly related to *, but nevertheless of interest to many of us.
Thilo
2004 Dec 17
2
T-1 vs channelised T-1?
OK. Now I show my ignorance.
What's the difference between a T-1 and a channelised T-1? I see that
Covad's voip service (formerly GoBeam) requires a channelised T-1. Then
I read recently on the list that many T-1s being installed are actually
HDSL....which would be not a T-1 at all...right?
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist
2004 Apr 26
3
Sipura SPA-3000
Anyone have one of these yet?
http://www.voxilla.com/shop/index.php?action=item&id=38
-Dan
2006 Mar 13
2
Can One FXO Support Multiple Phone Lines?
I am currently having our new office wired up with 8 PSTN lines. The guy
asked me if he could wire it up such that one line had two phone numbers. I
bought a Sangoma A200 with 8 FXO ports, but now I'm wondering if all I
needed were 4 FXO ports. Is it possible to set up Asterisk with 2 numbers
per FXO?
Thanks for any help,
Andrew
-------------- next part --------------
An HTML attachment
2005 Oct 07
1
PSGw 2.0 Skype<>SIP gateway
Hello,
I bought a copy of this software in the hope of bridging Skype into my
* box. It sort of works but the audio is all distorted and there's huge
latency. Does someone have this working well with their * server?
According to the wiki someone does, but I don't know who. I'm needing
advise on what to fiddle with to get it working correctly.
Thanks
Michael
--
Michael Graves
2008 Dec 05
4
Using DECT phones as SIP phones?
I see a variety of DECT 6 phones available CHEAP at costco. Is there a way
to convert these to SIP?
I recall someone talking about a Siemens devices that works with all DECT
phones, making them SIP (I think)....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081205/fdd14af9/attachment.htm
2005 Jan 18
5
Open Source QoS .
My router (1605R) currently does not support QoS. Is there any open source
software available so that I can set one up before the router?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050118/38b6e3f2/attachment.htm
2004 Apr 30
2
Using IAXTel to dial FWD
Hi All,
Is this working for any of you? We're supposed to be able to dial FWD
accounts through IAXTel by dialing 170099+FWD number. I don't ever seem
to be able to do this even though I can dial 800 numbers through
IAXTel.
Michael
--
Michael Graves mgraves@pixelpower.com
Sr. Product Specialist www.pixelpower.com
Pixel Power Inc.
2004 Jul 11
1
Stopping reinvite with IAX2?
Hi All,
I'm using DISA on my * server to avoid overseas toll charges when
making calls to Western Europe from my cell phone. I have DISA working
with a DID from a VoicePulse Connect account. The outgoing call to
Europe is also made via Voicepulse Connect.
I see that the IAX media path is bridging the inbound call to the
outbound call so that the media stream entirely bypasses my server once
2005 Jan 24
1
Hitachi Cable WIP-5000 Wifi phone?
I see that ABPTech are now offering this SIP Wifi phone. Does anyone
have an experience with it? I've considered the Pulver/Zyxel wifi phone
but would really rather have something that can handle WEP or WPA. I
run an 802.11g wlan with 256 bit WPA encryption.
This Hitachi phone looks very much like a cell phone, which could be
ideal.
Michael
--
Michael Graves
2007 Oct 07
1
New Embedded Distro
Hi All,
A couple of weeks ago I noticed Askozia PBX, which is a new embedded
Asterisk & OS distro at http://askozia.com/pbx. This caught my
attention for two reasons; it uses v1.4 of Asterisk, and it uses the
m0n0wall development framework to build on FreeBSD with a PHP based
GUI. I've used m0n0wall for years, and FreeNAS also, which shares the
same OS/GUI framework.
I booted the latest
2008 May 15
2
QOS and Asterisk
I will have a small shop with ~4 phones using an HP server with Asterisk on it, it has two NICS and so I planned on plugging one into the cable modem, and the other into the switch. I was going to let this box perform NAT for the company but I am concerned about QOS for the VOIP portion.
Anyone got a similar setup and care to share what they successfully implemented?
Thanks!
jlc
2005 Feb 20
7
bridging iaxtel calls to PSTN
Hello,
I just started using asterisk, and have a question. I have setup two
asterisk servers, A and B. A has a Digium TDM400 11B card (1 FXO and 1
FSX modules) and is connected to the PSTN. B has same, but is NOT
connected to PSTN. I want to configure B to call A via iaxtel, and
connect to the PSTN using A's line. How can I configure iaxtel dial
plan for B in extensions.conf? I want to be
2004 Jun 12
1
Call Relaying
Hello All,
I have a small * server in my home office with several IP phones. The
system is not fully in service yet as I'm still hunting for a cost
effective FXO adapter that I can rely upon for my two primary PSTNs.
That said, I'd like to move it into service for another
application...which brings up a question.
I'd really like to stop making international calls from my cell phone