similar to: SetVar ALERT_INFO

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

I am trying to have the ring types different for internal and external incoming calls. I have followed the guide on the wiki, the SetVar executes, in extensions.conf I have it as s,1, Yet it doesn't work? When the phone rings, the ring type is the one I chose on the phone, it rings same tone for both when I test. Using Asterisk Stable. Anyone got this working and can

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO header being sent, but the

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

Anyone having any problems with CVS-HEAD-12/24/04-15:59:15 and ALERT_INFO I have a system setup with polycom phones configured to auto answer on internal calls. When we upgraded to the latest CVS the auto answer stopped working. My dialplan has not changed. I did a sip debug and I dont see the alert-info tag in any of the sip traces. Any help would be appreciated. Thanks John Bittner Simlab.net

Hello, I have uploaded a custom ringtone to our SPA-922's for the purpose of sounding like a door bell chime when the doorbell is pressed. I am using __alert_info to set this ringtone. It appears that I can only set the ringtone via alert_info for the ringtones that come from Linksys. Has anyone else seen this issue? I am doing the following: exten => 100,1,SetVar(_ALERT_INFO=doorbell)

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

Hi, I've just found: http://lists.digium.com/pipermail/asterisk-users/2003-June/014475.html which talks about ALERT_INFO and Cisco phones. How do I actually get this working and what does it do? Do I need to add anything to the configs for the phone or is it just a SetVar(ALERT_INFO=1) - which I tried and it seemed to do nothing at all.. Thanks Andy

Hi, I'm having trouble setting the ringtone on my Polycom 501. The relevant entry in extensions.conf is: exten => 801,hint,SIP/creative1 exten => 801,1,SetVar(ALERT_INFO="Test") exten => 801,2,Dial(SIP/creative1,20,Ttr) In the sip.cfg: <alertInfo voIpProt.SIP.alertInfo.1.value="Test" voIpProt.SIP.alertInfo.1.class="13"/> and <TEST

I have been playing with a 480i with the new firmware 1.2.0.162 I hope to get some form of paging intercom function to work. In the wiki someone post that ALERT_INFO type of paging might be in this version of firmware but I have been unable to find anything on this yet. I have tried sending the ALERT_INFO to the phone a number of ways with no results. I then hooked up my bt100 and tried to dial

Since 1.4 ALERT_INFO variable has been deprecated. I used to send this via AMI: Action: Originate Channel: Sip/1234 Application: AgentLogin Data: 1234 Variable: _ALERT_INFO=info=alert-autoanswer Callerid: AutoLogin[1234] In order to send an autologin and autoanswer call to the agent 1234 on an Aastra phone at extension 1234. (just for example). Now in * 1.4 with ALERT_INFO deprecated I

But where do can you get this later firmware from? I'm still on 1.0.0.78 on my 480i. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Passchier Sent: 05 August 2005 00:04 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] AASTRA 480i Firmware 1.2.0.162 SIP ALERT_INFOproblems

I've done the unspeakable. I took a working setup of 1.0.5 and upgraded with the latest cvs. with 1.0.5 distinctive ring worked great. with the latest cvs, it doesn't seem to work with my sipura 2000 (the only thing i have to test it with). I can see in console that its sending the info, but its not working? i realize the likely hood is I messed something up somehow during checkout or

I am looking for clues on how to configure distinctive ring for a PolyCom SoundPoint 300. Does ALERT_INFO apply? If so, how? Thanks, David Koski david.nospham@kosmosisland.com

Hi When using a call file to place a call I can't seem to figure out how to get the variable alert_info passed to the actual channel (in my case a SIP phone) that an agent is logged in at. Please can someone give me a pointer in the right direction ;) Thanx! Probably best illustrated in an example: Below works great and tells SIP/123 to pick up the call from asterisk then it dials the