similar to: ZAP FXS problem - no caller id

Well, I got my nice new 4 port FXS card this afternoon, and with all my other asterisk problems, decided now was a good time to throw it in.... So far, I have dropped it in, done a clean cvs checkout on zapata, zaptel, asterisk, make clean and make install on each. I can load the wcfxs module which finds the card (though one time it failed the register check and locked the machine up, a hard

Hi All I am having a warning message appear in my asterisk console when I try to call from a SIP phone to an analogue phone on my TDM400P. [12232768320] file chan_zap.c, line 2886 (zt_handle_event): Didn't finish caller-ID Spill. Cancelling. I have done some searching of the mailing list but could not find a resolution. Any pointers greatly appreciated. Mark

Hello everybody. I have an customer asterisk 1.0.5 running well since 3 monthes, 2 TDM cards 4 FXO, 4 FXS. Since one week, unable to pass call between Zap and Sip getting the "exception on 15, channel 1" The * box is connected to an eads PBX and it seems that failure started when they make some changes on the PBX. Have someone an idea and what is causisng this failure? Here are the

Hi, I am a beginner in asterisk. Implementing it in my dept in India using TDM400b card with asterisk, zaptel, libpri version latest of CVS HEAD Callerid on my system is coming tough. Asterisk doesnot finishes the callerid spill and Cancells it. After going through code in Callerid.c and chan_zap.c I found that my line is providing caller id of length 8867. Flow enters in zt_call and

Hi. I'm experiencing that bug with flash on zaptel. That's the problem: Zap/A call Zap/B Zap/B flash transfers to Zap/C Now Zap/A is online with Zap/C Till now all ok... but now if Zap/C wants to transfer again, it can't... the debug says that it got a WinkFlash when call not up or ringing (as attached below, Zap/10 is Zap/C in my example) Apr 2 09:14:01 DEBUG[32789]: File

Here is a log from a recent call made out on a ZAP channel from a SIP phone inside my network. For some reason, CDR is billing time even though the "busy tone" was detected. It's also logging the call as ANSWERED. Is this normal behavior? Seems a little odd to me. I have this as the first 3 lines of my zapata.conf [channels] busydetect=1 busycount=3 CVS HEAD updated late

I am trying to help a guy out with his Atcom IP04. He has set it up like this. He has a handful of IP phones all connecting via SIP. He has two phone lines connected to the FXO ports one from telecom, another from vodaphone. He has set up the dialplan so that one of the trunks fails over to the other trunk. Everything seems to be working OK except for outgoing calls. He can call from

I've followed the recent thread on caller id with UK British Telecom networks (where the caller id data is delivered before the first ring). My understanding is that if I use a recent CVS head (e.g. CVS-HEAD-09/18/04-17:45:52) and a TDM400 with FXO modules, all I need to do is include the line: usecallerid=uk In my zapata.conf (in the [channels] section) I've done this, but I get: Sep

Sorry if this is a daft question but when a PSTN call comes in on my X100P the console shows the following; NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)... NOTICE[1217602880]: File chan_zap.c, Line 4456 (ss_thread): Got event 2 (Ring/Answered)...

Seems to have struck a small problem.. Using a t100p & Zhone channel bank.... one extension ringing another.....the following will appear WARNING[18448]: File chan_zap.c, Line 2685 (zt_handle_event): Didn't finish Caller-ID spill. Cancelling. if we are using defaultzone=au change it to us and the problem goes away..... any possible solutions ?? Gary .

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Calling from PSTN let extension 601 ring twice, hang up and starts over again to ring twice, ... If I pickup I do not hear on extension 601, and on the PSTN it is still signaling to ring. Can anybody enlighten me, please? extension.conf [incoming_88097074] exten => s,1,Wait(1) ;wait to get caller ID in. exten => s,2,Dial(SIP/102,20) exten => s,3,Voicemail(u102) exten =>

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

HI I have two servers both of which get this message on one of the lines. Ring/Off-hook in strange state 6. The one server seems to be ok with it, but the other one when an extension picks up there is no one there and the incoming call keeps ringing. I tried to adjust the levels in wcfxo.c like someone had suggested, but it didn't do anything. I also upgraded zaptel to the latest. 1.2.18 and

Starting - oh - three weeks ago I started getting this when I compiled zaptel stuff: In file included from /lib/modules/2.4.26smp/build/include/linux/spinlock.h:6, from /lib/modules/2.4.26smp/build/include/linux/module.h:11, from wct4xxp.c:31: /lib/modules/2.4.26smp/build/include/asm/system.h: In function `__set_64bit_var':

A very good day to you all, We can't get the phones to pick up on an incoming call on analog trunks. We're using the digium products in the box, with snom phones internally. This is the output from the asterisk console: linux*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo pstn-incoming en default 1 pstn-incoming

I'm trying to call from XLite phone to PSTN (I've tried this from internet and from local network the same) The Xlite doesn't write that it is connected but receives excelent audio. At the other end comes only noise. Some times only for a second you can here the caller voice , but this was only one time :) I saw with ethereal that UDP packets are coming and going to the asterisk

Yo! I changed callprogress to no, and in wcfxo.c source around line 334 i changed the value 32000 and -32000 to 10000 and -10000 because it had something to do with the DC voltage when it was ringing. I found reference here (http://www.voipuser.org/forum_topic_1791.html) with an interesting diagram of wiring that was incorrect for sending voltage to a phone or something like that. So put it

Hi All, Which is the best signalling to use when connecting an FXS inteface on a TDM400 to a standard telephone. I see that all examples use fxo_ks, but it is my understanding that kewl start is really designed for connections to the CO so that hangup etc. can be detected. So does it make any sense to configure a telephone for fxo_ks? Or should it be configured for fxo_ls? Regards Garry Taylor

Scenario, I got some very good help earlier from Joseph getting me up and started but I have a couple of small problems still. Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4 Analog dialout line and Analog handset plugged in. Problems: 1. Incoming calls work and the phone rings and can be answered no problems, (although I wouldn't mind being able to adjust the ring but