Displaying 20 results from an estimated 600 matches similar to: "Granstream BT100 - only partial success"
1998 Sep 14
0
NT Problems with Samba
Okay - all I'm trying to do here is smbclient from my Slackware Linux box
(SNUFFY) to my Windows NT 4.0 SP3 Server (BURT). Burt is a BDC and is
participating in WINS via my internal WINS Server. The Scope ID for the
WINS Server is HARVESTWEB - but I'm not sure how to set that in SAMBA. My
password server (I assume) should be my PDC with is GROVER (146.115.109.8)
Eventually, I want to be
2005 Mar 04
2
Broadvoice + incoming call works only for ~2 minutes
Hi, all.
The asterisk setup is working fine, receiving calls via broadvoice "initially". ?
When call comes in via broadvoice number, asterisk picks it up and routes
correctly, as long as the call came in within ~2 min from the previous one.
In other words, as long as a call comes in within ~2 min since the previous one,
asterisk will answer the call. However, if the call comes in
2004 Jan 23
3
SIP register/auth with Grandstream BudgeTone-100
Hello,
I have a problem with asterisk and Grandstream BudgeTone-100.
With default configuration everything works (in anonymous mode and fixed
IP), but if Im trying to enable registering, it dos not work.
I used 'sip debug' and verbose level 10, nothing happens if I switch
telephone on (no messages about bad auth etc). As I understood, after
switching phone on at first it will try to
2013 Mar 27
1
[PATCH] Fix support for Linux kernel images with no protected mode code
Some kernel images use the Linux kernel boot protocol and header
structure, but do not actually have any protected-mode code. For
instance, grub's 1024-byte lnxboot.img consists of 1024 real-mode bytes
and 0 protected-mode bytes; you can concatenate it with a full grub
core.img to produce a self-contained bootable kernel, but you can also
use it standalone as the kernel with the core.img
2008 Aug 01
1
reboot sometimes freezes, adaptic scsi card possible problem
On reboot, one out of 10 times, reboot (from hardware initialization) stops.
Referring to this portion of the dmesg -v output, of a successful boot,
where i have marked ">>>HERE<<<" is where the boot freezes on an
unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3
unchanged.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting
2006 Jun 01
4
astdb entry in sip.conf
Using svn trunk, I was trying to see what the astdb entry in the
sip.conf file does.
Nothing :)
I presume that it's meant to create an entry in the astdb.
so, I have
astdb=chan2ext/SIP/grandstream1=1234
in sip.conf
But database show only gives
*CLI> database show
/SIP/Registry/706 :
192.168.0.200:5060:3600:706:sip:706@192.168.0.200:5060
2009 Mar 29
2
Burt table from word frequency list
Dear all,
I have a word frequency list from a corpus (say, in .csv), where the
first column is a word and the second is the occurrence frequency of
that word in the corpus. Is it possible to obtain a Burt table (a
table crossing all words with each other, i.e., where rows and columns
are the words) from that frequency list with R? I'm exploring the "ca"
package but I'm
2005 Nov 03
0
advanced traffic control for ip and services
Andreas.Klauer@metamorpher.de>
> Subject: Re: [LARTC] Re: LARTC Digest, Vol 9, Issue 3
> To: lartc@mailman.ds9a.nl
> Message-ID: <200511021507.43661.Andreas.Klauer@metamorpher.de>
> Content-Type: text/plain; charset="iso-8859-2"
>
> On Wednesday 02 November 2005 14:59, szogunek wrote:
>> i.e. if class 1:{iden} have 190kbit
>> i want 95kbit with
2004 Jan 14
3
grandstream asterisk configuration
hi,
I have the following configuration:
Grandstream --> NAT (Netgear RP614)-->Internet-->Asterisk(public IP)
i can register fine and call ringing is working as good. The problem is =
i cant hear audio both ways and i get this error:
WARNING[22544]: File rtp.c, Line 375 (ast_rtp_read): RTP Read error:
Resource temporarily unavailable
my sip.conf file is as follows:
2005 Jul 15
2
[Aserisk-Users]no audio inside the net
Hi list, i've problems with my * server and the 4 phones which are
linked to it. i've 2 grandstream bt100 with the firmware upgraded to
101, a wi-fi phone (i don't know its brand) and another ip phone i
don't know its brand. with this sip.conf :
[general]
port = 5060
bindaddr = 192.168.100.229
context = default ;x changed from default to sip
localnet = 192.168.100.0/24
2012 Nov 14
1
Install error - disc 2
I am doing a fresh install of 6.3 from DVDs that I created on a Windows
laptop. I used ImgBurn to create them. When I started the install I selected
"test" and both discs passed. The install requested disc 2 and after putting
it in I get the message "That's not the correct CentOS disc". I tried
creating another disc but still get the same message. The installation
status
2004 Apr 18
2
grandstream and stun
Hi,
I noticed some issues with how grandstream handles
stun test. GS is running version 1.0.4.50. First I
reset the NAT router. Then reboot GS, get results of
"restricted cone". Immediately reboot GS, get results
"full cone". I tried quite a few public and commercial
stun servers. Also tried different model/version of
linksys routers. I always got the same issue. Winstun
on
2003 Jun 18
2
RH8.0 kernel lockup with PXELinux on x440
Howdy. We've got a couple IBM x440 (Summit) 8-way Xeon systems that I've
been trying to get netbooting for a while.
Since we use Kickstart and SystemImager to load OSes on our systems, a
system has to be able to netboot before it can be made available to folks
for project use.
System BIOS is the current one, v1.08. They're booting from a planar
BroadCom Tigon3 adapter. BIOS
2005 Aug 27
0
Newbie :SIP ETXTN to SIP EXTN calls
I am new to asterisk and need to dig up some info on how to set it all
up. It looks a bit daunting especially all the options available in the
.conf files.
I have 2 SIP phones, GXP2000 and a budgettone 100.
phone1 - 192.168.0.160/24 extension 1000
phone2 - 192.168.0.161/24 extension 1001
Server - 192.168.0.57
I get the following all the time, but can make calls between the 2
extensions,
2005 Feb 26
7
Symlinks for Windows
Hi all,
Dave Burt mentioned the possibility of adding symlinks
to the Dir class.
http://www.sysinternals.com/ntw2k/source/misc.shtml#junction
There is also Autrijus Tang''s symlink Perl module at
http://search.cpan.org/~autrijus/Win32-Symlink-0.04/
Looks easy enough, but it only seems to work for
directories, not regular files. Should we add this to
the Directory class, or simply
2004 Jun 24
1
Group Policy
I hope I don't get a ton of flames for this but I am wondering if anyone
knows a way to migrate a samba 3 controlled domain to an Windows based
Active Directory domain. Let me explain why.
I want to continue to use samba as my file and print servers but I
really need the ability to use Group Policies. As far as I know there
is no way to do this without ADS. I would like to have a Windows
2003 Jun 04
1
Printers and Faxes folder
We are in the process of uploading drivers to the samba server. Everything
seems to be working but it is very slow. When you browse to the Printers
and Faxes folder it takes a good 30 - 60 seconds to see the printers. I
have also noticed that when you try to send a print job you seem to get the
same delay. Below is what I am assuming to be a logged event related to
this problem. File
2005 May 12
0
Asterisk, SIP and NAT: Help needed!
I've been googling and talking with Libretel about my
setup and the fact that incoming calls to my asterisk
box through the Libretel number reach my box (I hear
the greeting being played) but then don't accept DTMF.
Here is a rough diagram of my setup:
Asterisk |
server | NAT <------------ Libretel
| router
|
Note that there are NO SIP
2005 Nov 02
1
Re: LARTC Digest, Vol 9, Issue 3
hi there,
is there any possible way to control traffic in child??? class with
selected protocols for example http i try to use this script but its now
working in theory:
there is root class 1:0 with subclass 1:2
in class 1:2 all ip adresses have their bandwidth limit 1:{iden}
and now i try also control bandwith in this class
i.e. if class 1:{iden} have 190kbit
i want 95kbit with burst to 190kbit
2016 May 12
2
syslinux vs isolinux - com32 serial port output problem
I have a need to display text to COM2 before loading a kernel. The easiest way to do this was to invade menu.c32 (menumain.c) and add a function to send the string out to the serial port just before the selected menu "label" is executed. In menumain.c, my function is called just before 'if (cmdline)'.
The code I wrote to initialize the hardware and send individual characters