similar to: Using IPKall and SIP with insecure=very

Hi Folks, I recently setup an asterisk system in order to provide a telephone phone system for my web hosting business at a very low expense. My problem is that DTMF tones are not being recognized when calling the IPKall phone number. Calling my server via FWD and IAXTel works out fine however. Has anybody experienced this with the IPKall service? are they not passing the DTMF tones or am I doing

Does IPKALL still exist? I am after a free SIP trunk - who is still giving these away these days? As I noticed Stanaphone is no longer in business? Regards, Dean Collins Cognation Inc dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 New York +61-2-9016-5642 (Sydney in-dial). +44-20-3129-6001 (London in-dial). -------------- next part --------------

We all know the FWD is NO more available. How to set up IPKALL so that my Inbound number rings on my eyebeam or xlite ? Any alternative for FWD ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090820/4206395a/attachment.htm

I tried this http://lists.digium.com/pipermail/asterisk-users/2008-January/203615.html But I am NOT getting call in asterisk. SIP.conf file : _________________ [general] port = 5060 bindaddr = 0.0.0.0 context = default externhost=59.160.44.21 localnet=192.168.0.2/255.255.255.0 ; register SIP account on remote machine if using SIP trunks ; register => testSIPtrunk:test at 10.10.10.16:5060 ;

I have a DID from IPKall.com which is forwarded to my asterisk box. Then this extension should call my ip phone using Dial application. Everything works fine, except when I pickup the phone, I can talk, the other party can hear me, but I cannot hear anything the person says on the ip phone. Then after a couple of seconds, the call hangs up. I don't know why. Here is the message I get:

Hi Folks, I'm trying to test out Asterisk overall. I'm having some problems with DTMF. Currently I'm playing with DISA, but I'm worried this will happen when I get to implementing AAs etc. I have a free SIP trunk from IPKall that I'm trying to make work. I'm able to receive calls, and I've now setup and extension with DISA and a password. I connect ok from the

Is it possible to receive a call via IPKall through IAX connectivity without registration? If so how to set it up. I've run-into and old link; http://forum.voxilla.com/ipkall-support-forum/ipkall-beta-testing-iax-connectivity-without-registration-26728.html -- Joseph

My Inbound calls lands , but line get disconnect in exactly 3 secs. Here goes my extension.conf setting : [from-ipkall] exten => 901835,1,Ringing ; call ringing exten => 901835,2,Wait(1) ; Wait 1 second for CID delivery from PRI exten => 901835,3,Answer ; Answer the line exten =>

HI I am having a problem with the new IPKall number I just got. Other sip numbers work that cost money. The problem I am having to one way audio. I can not hear the outside party when they call in. Is there something special about IPkall I'm missing?

hello- i was messing around with a did from ipkall.com, and asterisk seems to be ignoring the context specified in the sip config. in sip.conf, i've added: [7508] ;ipkall type = peer dtmfmode = rfc2833 context = remote callerid = "ipkall incoming" <7508> nat = no in extensions,conf, i have: [remote] exten => 7508,1,DISA(1111|internal) [internal] exten =>

I am having a one way audio issue with xlite clients behind NAT. They can connect to the server and make calls but no audio is heard on the other end. my sip conf [general] context=default bindport=5060 bindaddr=0.0.0.0 srvlookup=yes canreinvite=no[tomfmason] type=friend secret=secret callerid="Thomas Johnson" <XXXX> host=dynamic nat=yes canreinvite=no disallow=all allow=gsm

I have an account with FWD and I have configured my SIP.conf with [fwd] type=friend secret=password username=901835 host=fwd.pulver.com But when I am trying to dial out my own DID , I dont see any call landing in asterisk. In extension.conf (vicidial) file I have exten => 2062036895 ,1,Ringing() exten => 2062036895 ,2,Wait(1) exten => 2062036895 ,3,Answer() exten => 2062036895

I use IP Kall to forward my missed cell phone calls to. This way, if my phone is off, or out of a service area, calls will go to my * box. Concurrently, all incoming calls to my * box cause it to dial my local extensions at home, my extension at work, and my cell phone via NuFone. Problem: A loop can be created if my cell phone is not on. Say a call comes into my * box, it uses NuFone to call my

I am getting this Error on my Asterisk. How to solve it ? "ERROR[2654]: chan_sip.c:11355 handle_request: Missing Cseq. Dropping this SIP message, it's incomplete." -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090115/cb953962/attachment.htm

Hi all I justed noticed, a user is is not able to see all the folders on windows. User is mapping to her unix home drive from pc via samba If i move the file and change its name, i can see it on explorer on pc but there is no one to one mapping any help is appreciated thanks

Those of you whom have a free Washington State phone number from ipkall.om will know that one has to use the number at least every 30 days or else the number becomes disconnected. I have 3 numbers pointed at my asterisk my which work very well but I still had the 30 day problem. Is there a way that I can program asterisk to make a call to my WA numbers so that they wont get disco'd? I'm

Incoming FWD calls from other FWD users, iaxtel, or via ipkall, need to have dtmfmode=rfc2833. However, incoming FWD calls from the dialup access numbers (such as libretel) need to have dtmfmode=inband. To solve this problem, I created a second FWD account and configured sip.conf as follows, in order to match the incoming number to the proper dtmfmode: [fwd-rfc] type=friend secret=*****

We have some guys working in the US who can't always dial back to our company in Europe easily (lots of clients require authorization to make international calls), so I set up the following: - ipkall.com number links to a FWD number - office Asterisk box registers with FWD Then I programmed Asterisk to accept office extension number using DTFM tones. This works OK. Then I programmed

1.6.2.0-rc1. I am having trouble with voice mail intermittently not working correctly on CHANUNAVAIL. (it may happen for other statuses too, haven't checked). Basically here's what happens: -- Executing [1651xxxxxx at mydids:1] Macro("SIP/ipkall-trunk-14838bc8", "phone,1651xxxxxx") in new stack -- Executing [s at macro-phone:1]

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the