similar to: Need help selecting phones

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

I have a mbox-User with some crazy foldernames: -rw------- 1 vmail vmail 19238931 17. Dez 2011 Foo & Co -rw------- 1 vmail vmail 82415 19. Nov 22:06 Foo &- Co Dovecot can't handle that correctly: # dovecot mailbox list -u user Foo & Co Foo & Co dsyncing those folders produces some errors: dsync(awad): Error: Mailboxes don't have unique GUIDs:

Hello everybody. I have a problem with an integration between an Asterisk (1.4.24.1) on FreeBSD 7.0 and a Shoretel 7.5 server. To make a very long story short, when someone behind asterisk call an extension behing shoretel everything work as expected. When someone behing the shoretel server call someone behind asterisk the first 10 seconds of the call seems ok but then the line is dropped

Hello All, Here's the problem, we have happily set up several Asterisk servers to offer commercial service in the UK, our wholesale SIP termination partner (Magrathea - use SER/CiscoGW to provide us the service on a public IP address) - till now we have used Asterisk to connect clients on private IP's with Asterisk doing the required conversion for SIP/IAX between public and private

I've been anxiously awaiting ShoreTel version 6 because of it expanded use of SIP. My plan was to upgrade out ShoreTel server at our main office to version 6, and use Asterisk in our small remote offices, and have them all be able to directly dial each other's extension. (i.e. CEO in main office can dial ext 401 and get directly to secretary at small remote office, and vice-versa)

We have a Shortel system at out main site. We're putting Asterisk servers at several smaller remote sites. I know I'll be able to get the Asterisk servers to talk to each other via IAX, but can they talk to the Shoretel server? Basically, I'd like to be able to, from the main site with Shoretel, dial an extension, and reach that phone at a remote site, and vice-versa. Thank

Hi, Someone who has had experience with shoretel VoIP systems, can you please give me a run down of how Asterisk is either better or worse? I am completely unfamiliar with Shoretel systems, but someone had suggested we look into them. I said, you bring your Shoretel features, and I'll show you 10 things Asterisk does or can do that Shoretel doesn't do. I still believe that's

I have a client who is using a Shoretel PBX. This PBX apparently does not send DTMF information OOB, but instead sends this inband via the B-channel. This is traversing an Asterisk box via a PRI. The user calls the IVR (1-800-CALL-DHL), receives audio, but is not able to present DTMF to engage the IVR. With some light research it appears that the DSP is not activating until the call is

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

Okay, so I'm a noob. Asterisk looks very promising, so I say "thanks" and "good job" to all who contribute. My * test box is up and running with soft phones using IAX and SIP, so now I'm on to testing hard phones. I borrowed a couple ShoreTel 210 phones from somebody who had them on hand but they only support MGCP. I see that there's an mgcp.conf in

Hi, What is out there in terms of SIP enabled handsfree speakerphones? Looking for something that works well and also fits a low budget. I am used to using a Cisco 7940. It is a great phone but a bit expensive. Thought about the Polycom SoundPoint 300 until I realized that it does not include speakerphone functionality. Thanks, Adi

Hello all, I''m mucking around trying to get my desktop computer (Ubuntu 11.10, BlueZ 4.96, ASUS USB-BT211 USB Bluetooth adapter, no microphone hooked up at the moment) to act as a a hands-free device for my phone (Nexus S). It was relatively simple getting it set up for A2DP, and I was able to play music that is on my phone through my desktop''s speakers (using PulseAudio

Hi, You need to have completely replaced the Microsoft driver, because it doesn't support the headset or ctp Bluetooth profiles. This gave me fits! I followed the instructions at http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html and it works with both a Plantronics and a Motorola Headset, and I can answer calls with idefisk, eyebeam, x-lite, and kapanga. If you end

Hi *, is anybody using a bluetooth headset with some success?? If yes, which stuff is used (usb dongle and BT headset)? (I would like to : 1. be able to receive calls, if possible to answer acalls with the headset. 2. be able to place call, but this seem lot more difficult.) Laurent

I am able to pickup, hangup, and flash, using the buttons on the phone with all of the soft clients and both of the headsets I mentioned below. I don't believe I had to change anything on the client side, just had to get the ctp (cordless telephone profile) working in the bluetooth stack, which was a pita. I struggled with the same issue...I could use the headset, but that's not very handy

I have problem to change from handsfree mode to handset mode. When I switch from handset to handsfree while waiting for connection I press the green speakerphone button once. It is all well. Once it is connected I don't want to give the called party too much echo and I want to switch it back to handset. If I press the green button again I lose the call. Anyone knows whether it is possible

I didn't change it. I just had a heckofa time getting it to load. Unfortunately, I neglected to document the process, since this was on my home PC and I wasn't planning on replicating it. If I can find some time, I'll see if I can recreate the process. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

SIP user => Asterisk 1.6 server => SIP Trunk => external destination: works AMI script => Asterisk 1.6 server => SIP Trunk => external destination: Failed to authenticate on INVITE to '"asterisk" <sip:asterisk@(ipaddr)>;tag=alphanumeric' I?ve tried doing things like ?include => contextwithtrunk" in various places, googling, re-reading relevant

Hello, I am using Asterisk SVN, a cellular phone, and chan_mobile to run a small home PBX with two analog telephones connected to a Linksys ATA using SIP. It works great (except for some Bluetooth adapter bugs that I am still trying to beat...seems the misaligned audio detection still needs work), but I have encountered an interesting issue. If I am using an automated system that accepts input

I have a grown list of IPs that I am "deny ip from ###.### to any". Infected machines, hackers, etc.. Is there a way to have this list outside of rc.firewall and just read it in?