similar to: (Analog Intercom) PagePal by ATT -- was hooked to a Merlin

I understand that all work is going into xen3, but I had wanted to note that aoe (drivers/block/aoe) is giving me trouble on xen 2.0.6 (so we can keep and eye on xen3). Specifically I can''t see nor export AOE devices. As a quick background on AOE, it is not IP (not routable, etc), but works with broadcasts and packets to MAC addresses (see http://www.coraid.com). (for anyone who

Hello all, I feel dumb asking this, but does anyone have a link to the SIP firmware for the 7912 on Cisco's site? I have a SmartNet contract, but I just can't find the link (you can search for "7960 sip firmware" and find that fast). Thanks for the help, Jeb Campbell jebc@c4solutions.net

Hi All, I'm using an X100P to connect to PSTN ( context=from-pstn ). I'm trying to get fax detection to work. Using the simplest dialplan, I cannot get * to detect fax tones: [from-pstn] exten => s,1,Answer exten => fax,1,Goto(ext-fax,999,1) The fax is never detected (ie: Goto never executed) All that I see on the * -vvvvc console is: -- Executing Answer("Zap/1-1",

Management just approved purchase of a Digium T100P and a T1 card for our Merlin Legend Switch. I will appreciate comments from anyone performing this installation before: - Which T1 card did you use in the Merlin Legend? - Did you require any special interface? (CSU/DSU, etc) - Any items to watch during installation. Also we will need to remove one of our old analog Trunk cards to accomodate

Hello all. When I use outlook express and try see the printer, it says "print$ on Merlin - Paused", and I can't unpause it, I get: "You do hot have permission to modify the settings for this printer. If you need to change the settings, contact your network administrator." Merlin is the name of our samba server. Also, when I try click on properties, nothing happens

We currently have a Merlin Legend system. The voicemail is falling apart (with the transition to a 10 digit timestamp on Sept. 8, 2001, the system locked up and refused to take calls; the official solution is to change the system time back to a year with a matching calendar). We are in the process of preparing the network infrastructure to support a VoIP system with Asterisk, but won't be

I have a legacy pbx that I know nothing about. The PBX is a merlin legend system (now owned by avaya). I have found information on the list that I can use a 100D T1 card to bridge the PBX to an asterisk system. We are looking to head this route as well as replacing are AUDIX VM system with Asterisk. Has anyone done this that wouldn't mind sharing some of the merlin specific setup?

Hi I''m a new xen user. I gather from the mailing lists that this problem occurs with excessive console output. However, I believe dom1 was sitting idle at the login prompt when I noticed top on dom0 was showing python at 99% cpu. xend would not respond to restarts. Reboot fixed it. What debugging output can i give you, if any, if this happens again? sam elstob

Hi List, Merlin Magix hardware v02 I'm trying to get asterisk to act as a voicemail server for a lucent merlin magix PBX that we purchased used. We have 4 FXO channels between the two PBXs on a Sangoma A200 card. The 770 dialgroup is working properly, in that calls to 770 are answered by Asterisk. The magix is sending mode codes in the format #XX#XXX#, where the 2nd block of digits

Hi all: I've been developing and testing on a tdm400p card and it's been going well. As you probably know, the tdm400p needs an ide power supply, but the dell poweredge 2600 that this card is destined for eventually has all the power supplied on the backplane with no ide cables. The thing is, on the motherboard in the server, there is an ide ribbon connector, and beside that, something

Hi, I'm looking at setting up a small production system - predominantly for voice mail and IVR (with a few extensions and hold music MP3's). I've found a couple of IBM X330 servers, with dual 1.13Ghz P3 processors. My question is; is a dual 1.13Ghz P3 server sufficient to run for real-life demands? I come from a Unix/Mac background, so I'm not swayed by the '3Ghz'

Hello Everyone, I have released AstLinux 0.2.2. There are way too many improvements to list here, but here is a short summary: Linux 2.4.27, iptables, mini_httpd (with PHP & SSL), phpconfig, AstShape traffic shaping, tftp server, OpenSSH, proftpd, Soekris Net4801 and Pentium-MMX and higher x86 support. There is actually WAY more software, but I couldn't possibly list it all. It

Folks, I have a Merlin Legend R7 V10.0 with a 2 100D cards. I have 1 card in slot 4 going to CenturyTel, and the card in slot 10 going to a flip cable to a TE110P card in a Asterisk 1.6.x box. I have routing setup on the Merlin to send a block of numbers to the Asterisk. Currently the PSTN can dial the Asterisk Extensions. The Asterisk can dial Merlin Extensions. The Merlin can Dial Asterisk

Samba has a shadow_copy module to serve read-only snapshots to windows clients. I tried to use snapshotting in freebsd 5 (haven''t tried 6), but couldn''t get it stable. I''m really looking forward to getting it going on Solaris. Anyway you can read about the format of the link here: http://us5.samba.org/samba/docs/man/Samba-HOWTO-Collection/VFS.html#id2618182 When it

I was just about to replace 2 Merlin Legend systems (one in my house and one in my Parent's house) with * systems. I have 2 beefy linux systems ready to go and have enough Cisco 7960 and 7970 phones to replace all my MLX-10D, MLX-16D and MLX-20 phones. Then I discovered that * seems to be lacking a critical feature for replacing a legend (or any standard PBX) and that is an ability for a

Hello, I have a T100P card on a Red Hat 8 machine with Asterisk installed on it and I'm trying to get the data routing properly through it. I purchased an Integrated Data/Voice T1 Line with channels 1-6 voice and 13-24 data. The line is plugged directly into the Asterisk machine's T100P card. Previous to the asterisk set up we had an Adtran router that connected everything to what the

I have a very annoying problem, when doing rake db:migrate, I get the error message: Missing these required gems: will_paginate ~> 2.3.11 But the gem is not missing, It runs very well in my app. To make the rake pass I have to comment out the gem in my environment.rb file. environment.rb: config.gem "will_paginate", :version => "~> 2.3.11", :source =>

I know this is on the wiki, I just want to confirm so I don't blow up my cisco phones. I've got several cisco 7940's all running using cisco power cubes. However, my boss wants me to switch just a few over to poe, but doesn't want to fork out the dough for a nice cisco poe switch, or anybody else's poe switch for that matter. So my question is, what is the '99.999%

Hi; I'm trying to connect a TDM400P with an FXS module to a Valcom V-9940 Paging adaptor. This port on the TDM400P was connected to a 2500 Set and was working I just re-connected it to the Valcom (which is known to work on a Telco POTS line) and its not picking up. The Valcom docs say it need a minimum of 75 Volts at 20-30 Hz to recognize a call... So the question is what ring voltage

I saw in another post that a best practices doc will be coming, but I figured I would try to get this working. I''m trying to understand why zfs uses so many "zfs create" so I can use it better. What makes sense is that each zfs fs can have it''s own options (compression, nfs, atime, quota, etc). I really love this because it is so tuneable -- compression on these