similar to: Big thanks for supporting i586 type machines.

Adding Support For Vectorcall Calling Convention ===================================================== Vectorcall Calling Convention for x64 ---------------------------------------------------- The __vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible. __vectorcall uses more registers for arguments than __fastcall or the default x64

Hey, guys, when you are posting a new topic, can you please not use the 'reply; erase subject and message; compose new message; send routine?' Open compose for a new message and paste in centos at caosity.org (or, like I do, click on the address in my mail window). Makes it tough on those of us who read in a threaded fashion (I use Kmail myself). -- Lamar Owen Director of

CentOS made second place after Ubuntu and ahead of Fedora, according to my just-received Linux Journal. Congratulations CentOS team! -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

I'm posting here before going through all the fun to do up a real bug report to see if anyone else has seen this behavior. I have two identical Dynex external USB3 drive enclosures with identical 3TB drives in each enclosure. The dmesg output shows: $ dmesg |grep TOSHIBA [ 59.942546] scsi 7:0:0:0: Direct-Access TOSHIBA DT01ACA300 PQ: 0 ANSI: 6 [ 86.301123] scsi 8:0:0:0:

Ok, had a real oddity here, and am working to track it down. I've done a few updates to 7(1708) via CR at this point, and hadn't had any real issues, so during a slack time today updated our email server.? Now, prior to the update, I had our email server set up with postfix, but after the update the system had sendmail enabled and postfix disabled.? Like I said, I'm still looking

Ok, trying to install amavisd-new from Dag. Getting into a lot of problems, all of which seem to stem from Perl dependency issues. I have built several of the required modules by hand, but then got down to perl-MIME-tools. It builds FINE, but will not install. Why? Turns out, the perl RPM 'provides' perl(MIME::QuotedPrint)=3.01 but the module itself is 3.03. Build a perl module

Ok, I have a small dilemma, and I'm hoping someone here has had to do this before. I have at a site (not PARI) a server running some mission critical software that was written in 1997 for libc5, under AOLserver 2.3.? No, source code is not available for that version of AOLserver (it wasn't open-sourced until version 3.0, and the API changed rather dramatically at that point), not that it

Ok, did some experiments. Here's the scoop. You will need a live USB key of CentOS 6 with a persistence layer (overlay) and the EPEL gdisk package installed to make this thing boot. On a system with Chameleon already installed, boot the CentOS 6 install media. Installing Chameleon without OSX is an adventure that I've not done, so a 'testing' OSX install (10.6) with the

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal

I've updated CentOS 4.0 to 4.1 on several machines (some desktops, some servers). However on my laptop, update is failing with following error just after headers are downloaded: --> Running transaction check --> Processing Dependency: glibc-common = 2.3.4-2 for package: glibc --> Finished Dependency Resolution Error: Missing Dependency: glibc-common = 2.3.4-2 is needed by package

One system I have is configured thusly: AMD Duron 1200 (I have frequency restrictions in this application, and must stay below 1.3GHz or must be above 2.0GHz, and the 1200 fits nicely in our interference plan; besides, I was given the chip, and it's fast enough for the application). Soyo DRAGON KT400 motherboard, 512MB DDR RAM (DDR266). Silicon Image SATA interface card. Machine boots

Any idea on timing of 4U2? Reason being is https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=140002 and a pair of DPT SmartRAID V Milleniums. -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

The apology first. If I've offended anyone, or just annoyed anyone, I apologize for that. I sometimes can go 'off the deep end' when I'm being sarcastic (an old habit from my news.admin days when I ran a Usenet site in the early 90's), and I'll try to not go into news.admin mode here in the future. Now, the question. I have a few ideas about how to do this, but am

Hi.. i have an expression of the form: model1<-nls(y~beta1*(x1+(k1*x2)+(k1*k1*x3)+(k2*x4)+(k2*k1*x5)+(k2*k2*x6)+(k3*x7)+(k3*k4*x8)+(k3*k2*x9)+(k3*k3*x10)+ (k4*x11)+(k4*k1*x12)+(k4*k2*x13)+(k4*k3*x14)+(k4*k4*x15)+(k5*x16)+(k5*k1*x17)+(k5*k2*x18)+(k5*k3*x19)+

From: Peter Arremann <loony at loonybin.org> > Compiles aren't a great benchmark for a box since its 100% cpu and > neglects memory or disk performance but I had the numbers handy > for that :-) BTW, it is 100% ALU and a major strain on the ALU LOAD. In other words, it's not a good benchmark for even CPU. That's why the 3-issue ALU in the Nx586 on-ward blows the

Hi, I checked the sendmail and it is: [root at godslove root]# which sendmail /usr/sbin/sendmail Plesk uses sendmail and this is what is listed in my form that was working. I tried my form at 7:27 am this morning and this is the last listing in /var/log/messages Jul 3 07:05:42 godslove authpsa: IMAP connect from @ [67.138.221.157] There are no listings in /var/log/maillog. These are the

Hi This patch fixes code generation bug - 586-class CPUs don't support the nopl instruction and some 686-class CPUs don't support it too. I created bug 17792 for that. BTW. I think you should also optimize padding on these CPUs - instead of a stream of 0x90 nops, you should generate variants of "lea (%esi), %esi" instruction like gcc. This patch disables generation of

I've noticed that oggenc reliably crashes my K6-200 box after a few minutes of encoding. Has anyone else experienced crashes like this? Surely it must be a hardward fault, or perhaps a K6 problem (this processor has some errata). Still, I'm surprised that nothing else I do with it seems to hang it. Has anyone else seen anything like this? --Mike --- >8 ---- List archives:

Please include a testcase with the patch. gas uses " nopl 0x0(%eax)" for k6_2. Are you sure it is a gas bug? On 3 November 2013 13:50, Mikulas Patocka <mikulas at artax.karlin.mff.cuni.cz> wrote: > Hi > > This patch fixes code generation bug - 586-class CPUs don't support the > nopl instruction and some 686-class CPUs don't support it too. > > I

Hi, I am trying to assemble below instruction with latest LLVM code, but fail. Am I doing something wrong, or is this a bug? $ echo "vaddps zmm7 {k6}, zmm2, zmm4, {rd-sae}"|./Release+Asserts/bin/llvm-mc -assemble -triple=x86_64 -mcpu=knl -show-encoding -x86-asm-syntax=intel .text <stdin>:1:31: error: unknown token in expression vaddps zmm7 {k6}, zmm2, zmm4, {rd-sae}