Displaying 20 results from an estimated 10000 matches similar to: "Grandstream and CallerID - sorted"
2004 Jul 26
5
GrandStream CallerID
I see my own number(or remote called num) instead of caller id on incoming
calls on my BT-102.
but on Xlite everyything is OK. I'm using * latest CVS.
- shabanip
2004 Oct 08
1
grandstream bt-100 callerID not appear
dear all,
can anyone assist on how to enable callerID to appear
on grandstream bt-100 sip phone.
[1003]
type=friend
context=default
username=1003
secret=****
;fromuser=1003
;callerid=John Doe <1234>
host=dynamic
nat=no
canreinvite=yes
dtmfmode=rfc2833
incominglimit=1
;mailbox=1234@default ; mailbox 1234 in voicemail
context "default"
disallow=all
allow=ulaw
allow=alaw
2004 Sep 12
2
Grandstream Budgetone 100 Caller ID shows extension, not incoming Caller ID
I've looked through the archives - and see questions similar to mine,
but no answers. What, if anything, can be done to get the incoming
Caller ID to be presented on the Budgetone's Caller ID display? In all
other respects the phone+Asterisk seem to be extremely happy with each
other.
2005 Sep 21
7
add 0 (zero) to incoming callerID - how?
I have an asterisk box and SIP / IAX2 phones.
To call out, users have to add 0 (zero) before a real telephone number.
That means, that if they want to call someone that has a number 123456,
they have to call 0-123456.
Simple, right?
This has a serious drawback though - when someone calls us from the
number 123456, we see the callerID 123456, and we're unable to use the
callback/redial
2003 Jul 26
1
Asterisk SIP + Grandstream 100 phone
hi ..
i've just converted myself back to a newbie by trying to experiment with
some new stuff .. I have connected two grandstream Budgettone 100 phones
to my asterisk, and trying to experiment with them ..
I am trying to get into the asterisk sample basically ..
when I dial 1000 asterisk receives the call, but I do not
hear any sound on the phone.
Dialling from phone to phone direct (via
2007 Dec 30
2
asterisk callerid
I'm missing something simple I think:
I have an spa3102 for which I want asterisk to use the incoming pstn
callerid when it sends the call to a local extension (207).
callerid works fine for the internal phones (between each other)
The spa3102 is picking up the PSTN callerid and displays it in its own
status pages
Asterisk however, doesnt see the callerid at all.
The spa3102 is set to:
2005 Jan 21
3
zaphfc no callerid incoming to SIP phone but visible in logfile
Hello,
I've added a ZAPHFC card to my CAPI based system. Calls coming in via
ZAPHFC do not forward the caller id to the SIP phones. Calls coming in
via CAPI do forward the caller id to the SIP phones.
Any and all help is greatly appreciated.
The (hopefully relevant) conf file excerpts are:
extensions.conf
===============
exten => 807440,1,Answer
exten => 807440,2,Noop
exten =>
2004 Dec 01
3
grandstream bt100 upgrade 1.0.5.18
hi all
i upgrade a bt100 phone and it can't resgister with asterisk
Dec 1 13:25:49 NOTICE[1112980400]: chan_sip.c:7519 handle_request:
Registration from '<sip:@172.16.4.249>' failed for '172.16.4.226'
is was working with the version 1.0.5.3
some bady now what is hapening?
thanks in advance
Rodney
2005 Jun 21
2
Polycom and CallerID
I'm having a problem with the callerID that the polycom IP600 phones are
displaying. I would like to modify the CIDName and leave CIDNumber as
exactly what the phone call came in as(provided they aren't hiding
callerID). Most of the calls will be going to the queue, but a few will
go directly to the SIP phones.
I've done a various combinations of using SetCallerID(),
2005 Feb 01
2
Asterisk 1.0.5-BRIstuffed-0.2.0-RC5 caller id?
I tried to get callerid working the normal way but the cid is never passed
to the phone.
It doesn't work untill I set SetCIDNum(0${PRI_NETWORK_CID}) in
extensions.conf
which I found in the wiki:
http://www.voip-info.org/tiki-print.php?page=Asterisk+zaphfc
Is this intended behaviour, or still a bug?
It does work but it only shows one zero even though I have
nationalprefix = 0
2004 Aug 01
2
Zaptel - incoming delay
I am new to Asterisk so can I start by apologising if this question has been asked and answered already.
I'm in the UK using BT for two incoming lines, one on Wildcard TDM400P and the other on Wildcard X100P. I also have a SIP connection to voiptalk.org.
Incoming calls via SIP/broadband ring on extensions immediately. However, an incoming call via PSTN is displayed on the CLI as an
2004 Jun 29
3
incoming cid translation tables
How does one do translation for calls that come in from other pbx's
where the incoming caller ID is an internal extension number on their
pbx? Eg. when I get a call from Free-World-Dial the CID shows up as
"429102" which is essentially their internal extension number sans any
routing prefix. To dial the number back I need to dial the extension
with FWD's routing prefix
2003 Aug 23
3
Grandstream and CallerID not working
I have the following:
Call -> PSTN -> * -> GrandStream 101 1.0.3.81
The GS displays "ohn ro n2600" when the call
is past to the GS.
If I pass the call to a XTEN client, Caller ID
shows up.
Any ideas ??
2004 Aug 05
1
iConnectHere and CallerId
Is it possible to send the CallerId to IconnectHere with Asterisk
when making outbound calls?
I read somewhere that it doesn't work.
I have set up everything to send the correct CallerId info to IconnectHere
but I get a "442-887-926267" caller id.
In [globals]
ICONNECT1=1713...(my number)
MYNAME=My Name
I set up the Caller Id in the dialing macro:
[macro-iconnecthere]
exten =>
2005 Aug 22
1
Asterisk ISDN CallerID identification failure
Hello,
We have 4 'Onramp-2' Telstra ISDN BRI services operating on Asterisk
Server with Eicon 4BRI card. For most part the service is okay.
However, we are are having problems with passing callerID to internal
extensions.
This is the set of command executed.
exten => <pattern>,1,Answer ; Answer the line
exten => <pattern>,2,NoOp(${DNIS}) ; debug statements
exten =>
2005 Jan 24
1
zaphfc no callerid incoming to SIP phone butvisible in logfile
Try commenting out the line
pritrustusercid = yes
Or set it to 'no'.
That worked for me.
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jens
Sent: Friday, January 21, 2005 7:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] zaphfc no callerid
2010 Aug 04
1
callerid between 2 asterisk servers
I've got 2 asterisk servers on the same box: ubuntu 10.04 lucid. I have not
been able to send useful callerid info between them (callerid becomes
"serverB").
serverA register statement: (serverB has the exact opposite statement)
register => serverA:serverApassword at IP_of_serverB_nic/serverB
users.conf of serverA: users.conf of serverB:
[serverB] [serverA]
type=friend
2008 Jan 31
2
CallerID shows wrong values in manager interface
Hi everyone,
My manager interface seems to be producing wrong CallerIDs when
internal extensions call each other. Can anyone see anything wrong in
the configuration snippets pasted below? The following instance has
extension 101 call 103. The phone does show the right caller ID, but
notice that the manager interface has the CallerID as the target
number (103).
Thanks a lot for your time.
2005 Sep 14
4
Echo on SPA-3000 FXO
I've had an spa3k in service here at the house for a while now. After
some initial wrangling, it's been working okay. I've had to reboot it a
couple times and have noticed something rather annoying though.
My setup is pretty simple and, dare I say, common. I have the SPA-3000
"inline" between my incoming POTS line and the internal house phone. It's
setup to deliver
2004 Dec 01
0
Grandstream BT100 / HandyTone 286 and Level 3
Hello,
Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone?
I've been able to get my extension to interface with it, but there is no
sound
and the call on the GS side terminates prematurely.
Here is the relavent portion of the SIP.CONF
[4007] ; Budgetone BT100
type=friend
insecure=yes
context=test-budget
username=4007
fromuser=4007
callerid=4007
host=dynamic
nat=yes