similar to: Why I don't hear Call Progress

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

Hi out there, I think i've everything set up properly, outbound calls are working fine, but at incoming calls I can't hear anything, but the other one is able to hear me perfectly. I'm using an asterisk 1.6.1.10 in my internal network in a NAT, connected to my sip-provider using a trunk. Firewall settings on the router are: forward UDP port 5060,5004,10000-20000 to asterisk server

I just setup an Asterisk system on a small Shuttle box; I am only using SIP channels and have no FXO/FXS cards. The system works fine in that I can call my inbound number (Broadvoice) and have the system answer and I can make outgoing calls. The problem is that every time I want to change something in the sip.conf file, I have to do a 'restart now' instead of a 'reload' or

hello, Im tryin to make Calls from MS Netmeeting(h323) to Xlite(SIP) it rings, but as soon as i answered it dissconnects!!!! This is what i get from the Asterisk console: -- Executing Dial("OH323/R27469", "SIP/xlite1|10") in new stack Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1265 create_addr: Setting NAT on RTP to 0 Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1500 sip_call:

Do somebody using CISCO AS5350 with Asterisk? Which protocol do you using: H323, MGCP, SIP? This direction: [12sp->Asterisk->h323->as5350->isdnPSTN] is ok But reverse: [isdnPSTN->as5350->h323->Asterisk->12sp] cannot hear 12sp, but 12sp hear PSTN (codec g711u) -------------- next part -------------- An HTML attachment was scrubbed... URL:

Ok so I've just built and installed a CVS (HEAD) version of asterisk on RHFC2 running a 2.6.13.3 kernel.org kernel. I installed the samples via "make samples". Everything seems to work except one thing. I'm trying to do the connect to the Digium IAX demo server portion of the demo (dial 500) and I just get the following messages. I am behind a NAT server and did NOT change

Hello, These are error messages I get when I try to call a number over CAPI channel. -- Executing SetCallerID("SIP/xlite1-3b80", "0") in new stack -- Executing Dial("SIP/xlite1-3b80", "CAPI/hfcpci/b17") in new stack > data = hfcpci/b17 > capi request for interface 'hfcpci' == hfcpci: Call CAPI/hfcpci/b17-1 (pres=0x00,

I have a character vector j1 created from dimnames and want it to convert it to numeric. Like the first element: > j1[1] f896 1 896 > as.numeric(j1[1]) [1] 1990 why is it not 896 as it should be? This is true fr the whole vector. Thanks W.P. [[alternative HTML version deleted]]

Hello, I have the following setup: (*)<--->IP<--->Micronet 5012 H.323 box <---> POTS <---> PBX (Alcatel OmniPCX) Grand idea is to use the micronet's POTS interfaces to connect SIP phones to the PBX and to the PSTN. I think i even managed my way in the arcane and cryptic management interface of that appliance, but I am stuck against theese messages: -- Executing

I am installing Roundcubemail on Centos7-arm roundcubemail-1.1.8-1.el7.noarch The installer web app creates a config.inc.php to save within the /etc/roundcubemail/ directory. It warns that: "Make sure that there are no characters outside the <?php ?> brackets when saving the file." Thing is there is no ?> at the end of this. It is left out. So I got to add that

Hi all. Just as a quote note, can I thank everyone on this list. I find my self finding pretty much every answer I am looking for on here. And a big thanks to all thoughs helping us out. Mass Respect :) Ok, I'm using a SIP provider (SipGate UK) to do my international dialing etc, working great from extension 8 on phones. However some more friends/contacts have started using SipGate also, and

Hi, I have researched more into the problem of my Asterisk set-up not answering calls. The following error was shown on the CLI, can anyone explain what the problem causing Asterisk to not answer the SIP calls be? Information: I have an Asterisk box on a home LAN, behind a D-Link router/firewall connected to a cable modem. The 82.x.x.x is the IP for my cable modem. 192.168.0.101 is my

Hi, I've set up an Asterisk as voip gatway: VOIP <-> Asterisk <-> hfc-s card <-> NTBA <-> Siemens Gigaset Dect ISDN pbx. Outgoing calls from dect handset to the world are working. Incoming calls don't even ring the handset. I'm using the dahdi driver with the zaphfc kernel module. The hfc-s card is in nt mode. The msn is set at the dect phone/base station

hello ! My problem is: Astriks should create a connection to other members using a german Sip provider (www.sipgate.de). there are no problems with connections to: o Sip- Accounts o national phone numbers o mobile phone numbers but connections to international phone numbers DO NOT WORK (see the attached protokoll). The connection to international phone numbers does work when I directly use

I'm trying to setup sipgate on 1.6.1. Following the instructions on the site: http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk, I created [sipgate] in sip.conf and a [sipgate-in] in extensions.conf: [sipgate] type=friend secret= ;;SIP_PASSWORD insecure=port,invite defaultuser= ;; SIP-ID fromuser= ;;SIP-ID context=sipgate_in fromdomain=sipgate.com host=sipgate.com

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

I'm trying to setup a demo where my Asterisk box with a TDM01B (FXO) answers an incoming call and forwards that call to a SIP softphone (X-lite.) Seems all is built/installed okay: # ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. I'm pretty new at this and the extensions.conf file is eating my