similar to: Long distance provider with access number and auth code

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

Hello-- I'd like to do a little processing on external phone numbers from within the asterisk pbx. Fairly simple stuff, but... devilishly hard to make it work so far! 1. I'd like to dial 9 to get an outside line. 2. If the number dialed after the 9 is 754XXXX, I'd like it to go thru unmodified. It's the only local number available here. 3. I'd like all 1 XXX XXX XXXX numbers

Has anybody out there tried to use two different iconnecthere accounts with Asterisk? What I want to do is use a second account if the first is busy. I have tried the following: exten=>_91NXXNXXXXXX,1,StripMSD,1 exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION@iconnect ;iconnect is the first account exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION@iconnect2 ;iconnect2 is the second account But that

Hey I need another pair of eyes on this! I would like to add phones numbers to the blacklist from any handset so I did this: exten => _*66XXXXXXXXXX,1,StripMSD,3 exten => _XXXXXXXXXX,2,DBPut,blacklist/BYEXTENSION/1 exten => _XXXXXXXXXX,3,Hangup However what I get in the database is: /blacklist/BYEXTENSION : 1 And BYEXTENSION is not replaced with the actual number

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

I am using Cisco 7960 phones and have had a request to have the receptionist phone ring on multiple phones just in case she is not around. Call pickup is the theory here but the issue is that not all the people that need to hear the ring would here the receptionist phone ring so I think I need to have a second line appearance on the phones in question so that line will ring. Can this be done

I currently have two fax machines on my system. Both of them seem to send and receive very slowly. My end users are complaining; saying it was faster before we moved to * (Straight Analog Lines) Any help would be great. PS: I already have the d option on the Dial line. Both fax machines are in their own context: [faxes] exten => _9NXXXXXX,1,StripMSD,1 exten =>

I am trying implement two-stage dialing. Scenario is following: 1. * Dials SIP agent 2. SIP agent answer the phone and provide dial tone 3. * Sends DTMF string 4. "Bridge" channel with calling party I thought that something like: exten => _2XX,2,Dial_but_not_connect_(SIP/BYEXTENSION,10) exten => _2XX,3,Wait,1 exten => _2XX,4,SendDTMF($DTMF_DIGITS) Should do it. Thank

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

I'm thinking about using asterisk as an IVR system with an existing avaya index system. I've got 2x PRI 30 lines coming in to the Index, and I have 4 spare PRI cards in the Index. I was thinking about using a QUAD PRI card from Digium and having the calls come into the Index then transfer to Asterisk for IVR then back to the Index. That way if we get 60 inbound calls we'd in

-----Original Message----- <snip> Is this possible with asterisk? Anyone have a sample dialplan? -other than the problem outlined below I would try something like S,1,wait(20) S,2,voicemail(uwhatever) S,3,hangup That should ignore the call for 20 seconds and then leave a message in the unavailable greeting for 'whatever' then hangup That leaves another problem -

So I have a route with [1-9][0-9][0-9][1-9][0-9]* as a base route that should match NXXNX. Right? I built another route 01144[0-9]* that I thought would match 01144X. and send the call to the UK but the script is matching 01144207108???? With the first route. Can someone smarter than me help with some samples? Please? If I can get one for 1NXXN. and 01144. I should be able to figure the rest

BR C.

I am new to Asterisk. I am trying to ascertain the hardware setup (and associated cost) I would need. The documentation in the wiki (and elsewhere) is extensive but I am somewhat lost in product model numbers. Hence I need an initial recommandation to work on. 15 incoming lines, 25 employees). Initial scenario is to use * as a plain old PBX. I need voicemail, ability to transfer calls, ... I

I am trying to add a Polycom IP 3000 to our Asterisk system and am not getting anywhere. h323.conf [8908] type=friend host=192.168.104.25 secret=polycom context=crv-default callerid="Conference Room Polycom" extensions.conf exten => 8908,1,Dial(h323/polycom,20,Ttr) ; Polycom exten => 8908,2,Hangup I have tried setting the Asterisk system as both gatekeeper

I would like to integrate * with an existing Altigen PBX. I want to spend as little money as possible to make it happen. My main goal is to inexpensively connect a branch office to the phone system. Eventually I would like to replace the Altigen system with an Asterisk server so I don't want to spend any money on Altigen hardware. Currently the Altigen has analog interfaces with a couple

hello all- has anyone had any problems with the handsets on BT100's. Just picked one up for my lab and the speakerphone works great but I am only getting one way audio (incoming) from the handset. Since the speakerphone works fine, I can't think of any config. reasons why the handset wouldn't other than a faulty handset. Any thoughts or experiences? Jason Kawakami Technical

If this handles the case where 10 digits are required: exten => _9NXXXXXXXXX,1,StripMSD,1 exten => _NXXXXXXXXX,2,Dial,Zap/4/BYEXTENSION How do you create a handler which works for either this or the case with a leading '1' plus 10 digits? tnx -kim -- w8hdkim@gmail.com

I have set up an auto attendant and all is working but I am bothered by a long pause when switching between menus. This pause is between 5 and 7 seconds and is quite annoying. Is there anyway to address this. One other thing I find interesting is that when I move from the main menu to the sub menu the delay is there but when I move from the sub menu to the main menu the delay is not there.