similar to: Call gets disconnected upon connect

Hi, Some calls I make trough my PSTN asterisk gateway just hangup after some minutes. Even if I'm using sip or iax. I have callprogress=no busydetect=no in my zapata.conf. Anyone help? Or tell me what to look at /var/log/asterisk/debug. I didn't find anything wrong. [endpoint]---iax or sip----[asterisk]----E&M----PSTN. As endpoint I had tested another asterisk box (with a FXS),

Dear All, I just setup the Asterisk with E100P which it's no problem in Dial In but I have problem when outdial. The connection method is like this : E1 PRI <-SIGNAL-1-> MaxLink (PBX) <-SIGNAL-2-> E100P <-> Asterisk <--> SIP \-----> Analog PHone Now when I tried to dial out by SIP X-Lite on Windows, it shows me Connect, Trying,

Here is a log from a recent call made out on a ZAP channel from a SIP phone inside my network. For some reason, CDR is billing time even though the "busy tone" was detected. It's also logging the call as ANSWERED. Is this normal behavior? Seems a little odd to me. I have this as the first 3 lines of my zapata.conf [channels] busydetect=1 busycount=3 CVS HEAD updated late

This was submitted to the Dev list last week, but there was no response, and perhaps it wasn't the right group. I am developing an application in which I need asterisk to pass on an incoming call to a separate IVR server. The problem is that asterisk appears to hang up while the IVR is playing back a sequence of recorded voice and systhesized voice prompts. My setup is: Analog line

Hello, I have an Asterisk box with a TE410P connected to a PRI line and agents with X-Lite installed on the same LAN as the Asterisk server. Sometimes, when I make outbound calls it hangs up as soon as other party tries to picks up the call. Does someone ever experienced this situation? On X-Lite, only G711-ulaw is enabled and here is what i put in sip.conf: [4001] type=friend username=4001

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi all, I must admit that I am stuck. I have a TDM400P card with two FXS and two FXO modules which I had set up and configured so that it was working beautifully. The only problem was that occasionally it would get itself into a state where outgoing calls would simply be met with a very loud static. A reboot would fix this issue and everything would work fine for a while. Recently however,

Hi, I'm trying to install a Junghanns quadbri for a few days but i stay with an asterisk error. (Everyone is busy/congested ) Asterisk is working with a Fritz PCbut from one year and now i want to add the quadbri. The quadbri card has been configured in NT mode and with no 100 ohms S/T termoination. (I'm not sure if the S/T parameter is correct) I have installed the bristuff package

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. When I pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if I dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi evereybody, I'm trying to use musiconhold during dial tones. But I only can call earing dial tones instead of music. Now will see my configuration files. AGI File(using AGI script to EXEC DIAL) print "EXEC Dial Zap/g2/numberc||m\"; $res=checkresult(); Extension.conf exten =>_numberb,1,Answer exten =>_numberb,2,SetMusicOnHold,default exten =>_numberb,3,AGI,dial.agi

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hi everybody, Firstly I'm going to describe the scenario where I'm working. I use a E400P with Asterisk CVS-05/22/03-11:14:50, and I'm working with asterisk trow AGI scripts (Perl). The configuration of extension.conf is: exten =>_s,1,Answer exten =>_s,2,AGI,script.agi Inside the AGI script is call Dial application as follows: print "EXEC Dial

hello, Im tryin to make Calls from MS Netmeeting(h323) to Xlite(SIP) it rings, but as soon as i answered it dissconnects!!!! This is what i get from the Asterisk console: -- Executing Dial("OH323/R27469", "SIP/xlite1|10") in new stack Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1265 create_addr: Setting NAT on RTP to 0 Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1500 sip_call:

Hi, I'm having problems using a TDM400P Card. I put my SIM card in a Nokia Premicell and connected it to a TDM400P card but when I make calls to the number, it hangs up automatically. The card also can't call out. Any ideas? I've searched the archives without much success. I appreciate all your help. Details: I'm using Asterisk 1.2.17 on Fedora Core release 5 (Bordeaux). On an

I am running asterisk 1.2.27 and it dead today. The following is the backtrace of core file. Can anybody help me to identify what is the possible cause of crash? It seems the mysql connection causing problem in Thread 2. But I can not tell what exactly happened. This asterisk is using as ACD for over hundred agents. #> thread apply all bt ........ ........ Thread 6 (process 20135): #0

I have a question on how to handle the "h" routines. I have noticed that if the call is hung up by the side that originated the call, the "h" routine is not extendable via a macro, or at least I have been unable to do it. My tests have included only SIP->SIP calls. If the originating side hangs up first: The macro is called from "exten =>

Hi! I'm using asterisk 1.4.17 with twinkle and a custom phone based on iaxclient 2.0.2 and I'm struggling a bit with DTMF and features.conf. While the twinkle client is able to initiate an attended transfer using *2 (as configured in features.conf), the iax client is not. I can see the DTMF messages showing up on the asterisk console, but asterisk does not invoke the features

I have been having some troubles with the zaptel channel on what appears to be the inbound process. The box is running the stable CVS code and has a TDM400P 4-port FXO card in it for analog connectivity. Channel 1 is the only active port on the card at the moment as we only have one analog line. What has been happening is that it looks like Asterisk has been detecting an inbound call even though