similar to: OT: Kphone installation problem

hello, I am running asterisk on one linux PC and want to talk through this server using Kphone installed on 2 different PC's. These are the extra lines added to sip.conf and extensions.conf respectively. sip.conf [jitha] type=friend host=dynamic secret=jitha context=sip dtmfmode=inband [sudhananda] type=friend host=dynamic secret=sudhananda context=sip extensions.conf [sip]

I'm trying to get two linux machines with kphone-3.11 two communicate with each other over asterisk. I have them configured correctly on asterisk to use sip channels, but when I call from one phone to the other I don't any voice communication between the phones. According to the phones I'm connected, but according to asterisk, I get the following message: -- Executing

Hi , I'm triying to use kphone 4.02, but when i'm make a call the programs doesn't respond any command, so i can't hear any sound .. in sip.conf that's my codec config: disallow=all allow=gsm allow=ulaw allow=ilbc and the kphone give the follow : SipClient: Sending: 06:46:28.116 -------------------------------- ACK

Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot@nixon.butchwax.com Running FC1, ThinkPad T22, headset thru the soundcard. Asterisk is asterisk-1.0_RC1. No NAT. The phones I've tried so far are as

Hi, I am new to Asterisk and SIP. I have just installed ser as sip server and asterisk ser is in 192.168.6.244, without authentication kphone as sip client in 192.168.6.254 asterisk is in 192.168.6.100 and did not install hardward on my pc in sip.conf , i add following lines ... register:jimmy@192.168.6.244/1000 ... [192.168.6.244] type=friends host=192.168.6.100 fromuser=jimmy

Hi, i just installed latest asterisk on fedora rc2 and on the same machine i installed a sip soft phone called kphone. Kphone complains about /dev/dsp being used and can't place/answer calls (/dev/dsp is obviously used by asterisk) . how can "share" my sound card with these two programs? or can i disable the sound card in asterisk so i can use kphone to place/answer calls? BTW kphone

I'm having trouble with kphone on our system. It's using ulaw on an internal network. No NAT. I had it working fine with very similar hardware (an old Dell Optiplex GX1) running as an LTSP terminal. But then I put the same sound card in an Optiplex G1. Kphone will answer the line fine when I call it (call coming from the * machine), but when we try to get kphone to dial, each GUI

hello all, i have already configure sip.conf and dialplan. i done the follow me script. first problem: i want to call(with kphone) someone at my extension, i must dial the extension number. i can't dial their username. 20531603@192.168.8.125 (work) mustafa@192.168.8.125 (call fail) is it possible to do that?? second problem: if i want to call another number (not my

Got no responses to this, but the list seemed to be down for a while, so here it is again. Sorry for the extra bandwidth! John Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot at nixon.butchwax.com

I just can't get kphone to register with asterisk, i can make calls to the demos and even get into the mailbox but kphone cannot register. Here's my story. Can you help me?? Please I have installed asterisk on debian using apt-get install asterisk. I have configured an extension in extensions.conf as follows exten => 8003,1,Dial(Sip/8003,${RINGTIME},rt) exten =>

Hi, I have * working with X-Lite and Sipura adapters, but I have one person who is linux based, and is trying to use Linphone and Kphone. His end works, but I get very bad echo on my end. Have any of you folks been able to get linux based soft phones working well with *? I'd appreciate links to howtos/docs if you have them, and/or samples of working configs for * and the linux

-------- Original Message -------- Subject: Re: [Asterisk-Users] Troubles with Kphone Date: Tue, 25 May 2004 15:44:15 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com References: <200405250652.46370.klky3@fibertel.com.ar> enano wrote: >Hi , > > > >I'm triying to use

Dear Asterisk experts, I've just downloaded Asterisk CVS version (since I'd like to manage its configuration from RealTime). Next, I have kphone on the same Linux host, and VmWare virtual machine with Windows and X-Lite IP phone inside. I successfully tested the demo's with X-Lite, but failed to hear something with kphone (v4.1.1). There were NO problem with this kphone and stable

I've read everything I've found on tcpdump-smb, and still can't get it to work right. I downloaded the binary from samba.org, and executed the command like so: (The command belowis directly from the README.smb that comes with tcpdump-3.4a5.tar.gz) ./tcpdump -i eth0 port 139 host 192.168.0.1 tcpdump: parse error How do I use it to get the decoded smb output? BTW: I also

hi all when starting kphone, it tries to register with asterisk but fails after a while. The SIP entry in * for this user is below. This is identical to the other SIP entries. The other SIP clients are MSN messenger plus one snom. these work fine. See SIP debug output attached as 'screen-exchange' thanks roy [roy] type=friend ;insecure=yes username=roy ;secret=password host=dynamic

Hello I installed qt-win-opensource-4.0.1-mingw in Wine. I copied all dll's into system32 directory, and mingw10.dll too (because qt need it). Then i compiled a simple "Hello World!" with Qt dlls using MinGW for linux. I have no problem with cross compiling (0 errors & 0 warnings). But when i run the app, wineserver & wine-preloader eat 90% of RAM and CPU and show only

I'm trying to build an app with clang against libraries that are using GCC 4.1 ABI. I'm getting an error "weakref declaration must have internal linkage" Now I'm stumped though, perhaps it is an incompatibility between clang trunk and gcc 4.1 include files? - I've built clang from trunk - fixed include paths to point to gcc 4.1 include paths When I modify clang to use