similar to: Strange Quality problems with Asterisk, Gentoo, Redhat and Kernels - /dev/dsp

-------------- next part -------------- An embedded message was scrubbed... From: Deon Rodden <drodden@webunited.net> Subject: Re: [Asterisk-Users] Strange Quality problems with Asterisk, Gentoo, Redhat and Kernels - /dev/dsp Date: Thu, 30 Sep 2004 09:05:39 -0400 Size: 5509 Url: http://lists.digium.com/pipermail/asterisk-users/attachments/20040930/289c69cc/dsp.eml

I finally got 2.4 recompiled with RTC as a module: Module Size Used by Not tainted autofs 13684 0 (autoclean) (unused) acenic 241092 0 (unused) iptable_filter 2412 0 (autoclean) (unused) ip_tables 15864 1 [iptable_filter] e100 62340 1 rtc 9084 0 (autoclean) Here is my

I have a system with no Digium hardware in it (two others with 2 X100P cards in each of them as well). I'm interested in using MeetMe in the one without the hardware (it works great in the ones with the hardware). I can't use ztdummy, because the system has usb-ohci drivers, rather than usb-uhci. I have read the little there is about zaprtc, and I am wondering whether there is a

I've been working with Asterisk for about 2 months now and am doing well. However I decided to switch platforms from Fedora Core 1, that my predacessor was using, to Gentoo, for obvious reasons. It just seems faster and less "bloated" everything I need, nothing I don't. Anyways, I've read what the Wiki had to say about it and I was only confused on one thing, putting

Hullo. Having found http://bugs.digium.com/bug_view_page.php?bug_id=0000875 I grabbed the original 0.0.1 and Dan's patch, and whilst it didn't apply, I was able to patch the zaprtc.c manually - the Makefile has changed a lot, and I wasn't able to understand the changes. (this is all on a machine that's never had any * on it before, and has a 2.6.5 kernel with a matching

zaprtc 'load' is failing on my machine (the make was fine, same output as other posts to this list) [xxx@xxx zaptelrtc]# make load sync modprobe zaptel insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or

If your remotes are not reporting any trouble. This may be farfetched but power may be to blame. I have had the ciscos 'freak out' with unstable power. It looks like the load on the power cubes cannot keep the caps loaded to deal with fluctuations. Or you may have a ground loop somewhere. Are the phones plugged into UPSs? I had flaky 7960 work fine after pluged into a Cisco POE switch.

Hi, i am testing stuff for a couple of days now with Asterisk CVS-v1-0-07 and everything worked fine sofar when suddenly the voicemail and musiconhold sound output stopped working. The voicemailmenu still works though. I can see the voiceprompts etc in the debug messages on the asterisk CLI but i cant hear anything. Everything else works fine though. I can call out fine etc. I did some network

Hi, I'm trying to setup a small BRI ISDN <-> voip gateway. The ISDN card is based on Cologne chipset, so I try set it up with zaphfc. The versions i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e When I'm doing the insmod on zaptel, zaphfc, zaprtc: Zapata Telephony Interface Registered on major 196 PCI:

I am also running a pretty recent version albeit not today's CVS, but CVS-HEAD-11/20/04-11:29:52. D you have problems b/w the Ciscos or only when going out to the PSTN?? I have 35 7960s with a PRI and no problems that you speak of. I do get an occational dropped call but that may be the DHC server lease running out on the phones. Can you tell us a little more about your setup???

Hi, I don't have a zaptel device for conferencing. I read from the lists, that ztdummy and zaprtc need to be installed to get conferencing. I could able to compile successfully with ztdummy and when i receive the call it says, -- Goto (13732,s,1) -- Executing MeetMe("SIP/-08118800", "1234") in new stack == Parsing

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

Hi there, since I found a couple of reports with complaints concerning zaprtc I thought that one or the other user might be glad to know that it works indeed. All that was necessary was to copy all *.h files from /zaptel into /zaptelrtc and then do "make" followed by "make load". Of course you'll need to make sure to not have rtc compiled into your kernel, or loaded

Hi Everyone, I read through the list on the issues with the ztdummy driver which I need for MeetMe, but I seem to have come across a problem that I cannot seem to find an answer for. I am running Gentoo 2.6.10 on an Intel box. I have read the the wiki entries on the ztdummy and followed the instructions as they relate to the 2.6 kernel. Everything compiled great, but a modprobe ztdummy

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

Hi I want to set up * as a conference bridge. I would like to be able to conference is SIP calls (up to 12) I am looking through all available documentation for * to get info on how it is done. No luck so far. Can somebody direct me to the info in this subject? Thank you Serge _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online

Hi, I'm trying to intall zaprtc on my machine (I don't have UHCI_USB nor Zaptel) and I have a strange behaviour during loading. When I do >make load I have : ./zaprtc.o: init_module: Input/ouput error With a quick dmesg got: rtc: I/O port 112 in not free Is someone have any idea to solve this ? I saw on the README file that rtc support should not be enabled in the kernel, but I

I feel there is some unclarity about the need for a timer in Asterisk. As Asterisk moves into production environments, this needs to be sorted out. I'm setting up an Asterisk in a production environment with no Digium cards at all. It is planned to be used as a clean SIP hosted PABX, where we connect to the PSTN via gateways with proper echo cancellation. There is no USB driver on the card.

I have successfully installed and configured the asterisk, the incoming and the outgoing calls are working fine, its a tremendous solution :) Now i want to enable trunking between two asterisk boxes, in the iax.conf i have put: [karachi] ... ... ... trunk=yes ... ... ... everything seems to work fine but when i load asterisk it says: -------------- Feb 17 10:59:14 WARNING[18726]:

I have compiled the zaptel library and zaprtc on a system that gives the following from "uname -a": Linux fxxxxxx76.mydomain.de 2.4.18-64GB-SMP #1 SMP Wed Mar 27 13:58:12 UTC 2002 i686 unknown Makefile for zaptel had the following line uncommented: # KFLAGS+=-D__SMP__ When doing the "make load" for zaprtc I get the following error: modprobe zaptel