similar to: CODECs and sip.conf and voice quality

Hello All, I am looking for a way to do priority call ringing. That is when a caller places a call to another party, they can indicate that the call is a priority and get a different ring to occur (ring cadence) on the called parties phone. This would be synonymous to an intercom ring on a key system. After some investigation, I have come across the ability of the GS BT101 which will ring

Has anyone had any experience with wireless LANs and Asterisk? We have and here are my impressions. We configured an Asterisk in the office as a precaution to see how it would work for our own retail customers. Our office is open space, about 800 sq ft. (20x40 area). We use Snom200 and Grandstream SIP phones. Using the latest Linksys wireless access point (WAP54g) and 3 wireless bridges

All; Since I have interest in providing the capability for callers to speak the department, person or number they wish to call, as well as other IVR scenarios, I have been reviewing much of this lists email archives and searching the web for open source voice recognition that will work with the Asterisk PBX. What I am trying to determine, is what will it take to get it working on Asterisk? How

Hi, I'm having trouble explicitly forcing a codec between sip devices. Am I missing something or is this not really possible? I have a grandstream registering to asterisk, named sip0. Sip0 registers, via sip, to another asterisk box, sip1. When I place a call from the grandstream, it will travel through sip0 to sip1, where it is then placed to the PSTN. Nothing can reinvite, this path is

We have no feedback or information about iLBC usage, is almost not used at all looking at our usage charts. Adrian On Apr 12, 2010, at 3:44 PM, messaging bay wrote: > blink : It use iLBC also. > > Voice over IP > > RTP: A Transport Protocol for Real-Time Applications RFC3550 > RCTP: Real Time Control Protocol attribute in Session Description > Protocol RFC3605 >

blink : It use iLBC also. Voice over IP RTP: A Transport Protocol for Real-Time Applications RFC3550 RCTP: Real Time Control Protocol attribute in Session Description Protocol RFC3605 SRTP: The Secure Real-time Transport Protocol RFC3711 DTMF: Dual-tone Multi-frequency Signaling RFC2833 and inband MWI: Message Summary Event Package RFC3842 Speex and G722: Wide-band Internet Codecs G711, iLBC

I'm trying to get my asterisk server to reinvite. I have two asterisk servers with public IP's. My users (behind NAT) register on one server (I'll call it server 1), and for some calls they are transfered over to the other server (server 2), because that server has the E1's. I want server 1 to be in the signaling path for billing reasons, but handling the media stream is killing

Hello, everybody: I'm developing an application using Asterisk and a TDM-400 card. I understand the concept of the difference between GSM and WAV files when using Asterisk, but I'm not happy with the sound quality with the GSM compression. It's merely *acceptable* for a telephone call, but for anything else, it leaves something to be desired. Case in point -- if you compare the

I need to debug a call quality issue with remote users on the other end of a satellite link. The symptoms are: we here on the Internet side can hear them just fine. On their end, things work sorta OK most times, but they often suffer from severe dropouts and digital warbling, both of which I attribute to them missing packets. Often times they can't make out a word we are saying while we can

Sorry -- I goofed on the sample rates! Apologies! Hello, everybody: I'm developing an application using Asterisk and a TDM-400 card. I understand the concept of the difference between GSM and WAV files when using Asterisk, but I'm not happy with the sound quality with the GSM compression. It's merely *acceptable* for a telephone call, but for anything else, it leaves something to be

Hi, I was running asterisk 1.0.7 but we've upgraded now to CVS-HEAD. I've noticed this.. and several people have commented that audio quality seems to have gone down hill. Just going phone-->asterisk-->PRI. I've not changed the configuration files during the upgrade. sip.conf is: allow=ulaw allow=ilbc allow=g726 allow=g729 allow=g723.1 And all the phones had been using

I'm a new Asterisk user. I've managed to set it up to do everything I want except sound good. Currently, Asterisk sounds considerably worse than my cell phone. I know VOIP can be _better_ than my cell phone, because I've heard Skype do it. (Using 32k iLBC, I believe.) I did an experiment with audio quality: 1) I made a recording which was pretty good. I used an iSight

Greetings all, I'm trying to improve the codec selection on a few of the asterisk boxes we have to keep the g729 licences free for calls from ATAs that don't support anything apart from g711 and g729. GSM seems to offer noticably inferior call quality (at least when using a softphone + decent headphones), but it's about where I want the bitrate to be. I know there are lots of Speex

Hi all, Is there a possibility to set the codecs Asterisk will choose in the dialplan ("exten=>" statements or their contexts) instead of sip.conf? My problem is that I connect my SIP phone with several providers (Nikotel, Sipgate, Stanaphone) for icoming and outgoing calls. Not all of these providers offer the same set of codecs. I'd like Asterisk to use the same codec for the

Hey everybody, I've been playing around with Asterisk (Current CVS Stable dated: Asterisk CVS-v1-0-11/23/04). I've purchased 2 GS BT102 SIP phones. Both have been upgraded to firmware 1.0.5.18. I've also have installed on my desktop and laptop, X-Lite. I've been using these to learn how to setup Asterisk. I've got a Wildcat X100P on order and will be here next week. My

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no

Hello, I have been having this problem for several releases of Asterisk. Whenever, I use iLBC or Speex codecs to make a SIP call, I get "No compatible codecs!" error, even though I am not disallowing anything in my sip.conf. One way I made it work is to hard-code these codecs in global_capability variable in chan-sip.c that seems to have fixed the problem. But I know it was

Hi List; Anyone tried to use speex, ilbc and g729 and come back with a preferred one in the quality? Regards Bilal ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

Alright, folks. I just deployed * into full production at my office. We have around 50 7905's, 5 7940's, and a handful of soft clients. We run a call center with around 15 agents. I also have a queue set up for the receptionists so that they don't get bombarded with calls. Everything seems to be working with a very few minor glitches. I firmly believe that the few problems we are

What's the proper way to specify the allowed codecs in iax.conf? It doens't like allow=ilbc,gsm but if I put two allow= lines, one for ilbc and one for gsm it seems to always to want to use gsm. --Eric -- BTEL Consulting 850-484-4535 x2111 (Office) 504-595-3916 x2111 (Experimental) 877-552-0838 (Backup Phone)