similar to: FWD's Ed Guy notes from Astricon

How does one do translation for calls that come in from other pbx's where the incoming caller ID is an internal extension number on their pbx? Eg. when I get a call from Free-World-Dial the CID shows up as "429102" which is essentially their internal extension number sans any routing prefix. To dial the number back I need to dial the extension with FWD's routing prefix

Hi, Reporting from Astricon, Mark uploaded the 1.0 release while giving his speech a few mintues ago.. Bring out the champagne :) Lethol

Hi, Just finished watching the season finale of '24' the TV series. Throughout the series they have been showcasing Cisco hardware especially Cisco IP phones (7970's). On the last episode or two they showed what seemed to me a new cisco IP video phone. It stands just as a 12" lcd screen with the cisco branding/logo and letters just as the 79xx series. I wonder if this is a

Hi, I recently bought a 7910. I found out too late that it would not do SIP as I initially thought. Anyway before ditchingit for a 7960 I wanted to try it out, I read that the guys at http://chan-sccp.sourceforge.net/ had done some improvements to the original chan_sccp driver and having 80% functionality with this model. I have not been able to compile their driver and keep getting the

I have tried sjphone - worked well, although I think my 3 year old IPAQ had a bit of a hard time keeping up with the pace as there was quite a delay in the speech. Probably says more about my ancient IPAQ than SJPhone. Sam Lex Lethol <lethol@gmail.com> wrote on 23/09/2004 15:31:39: > I tried the xten one and didn;t like at all.. > > Havent tried to SJPhone, but my guess is

Hi, I'm having a problem with one of our 7960. They all run latest 7.4 SIP firmware. The problem appears on the other end. The other end constantly hears a 'crackling' noise. I have tested using phone set, headset and speaker and the noise appears on all cases. I have other 7960 setup exactly same way (using same asterisk, firmware, etc) so it looks like a hardware issue.

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

Hi, I am using a voicetronix OpenLine4. I downloaded a recent asterisk CVS from voicetronix webpage but have had no luck to reduce echo on outgoing calls and for it not to crach on incoming calls. I dont think both problems are related though. Here is an output of what happens when a new call comes in and my voicetronix tries to pick it up and crashes asterisk: > vpb/1-1: Event

Hi, I am fairly new to asterisk. I am currently testing my first setup. I've been able to debug most of the problems to make asterisk work with my hardware setup until this time. Currently I have the following issue: Voicemail is running but when I test to leave a voicemail thru my incoming PSTN channel (voicetronix / vpb), asterisk will not detect sound (according to the log) on that

I have installed a 6VPCI card from voicetronix's but i can't get astersik to use it! Now looking at the loaded modules the chan_vpb is not loaded- so I assume that is why it is not working. Now I modified my vpb.conf file and extensions.conf, have I missed something Has anyone a installation guide as I am very new to this!! I have had asterisk working with SIP extensions. by dowloading

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

Is there a soft phone for PocketPC or iPaq? If not, is someone working on it? I will be more than willing to contribute my mite if needed. Thanks, -- sudhir

Apparently asterisk's default way to a 3-way conference lets the user in the middle hangup and the other parties stay on the conversation. This is great some times but it creates quite a bit of problems when trunks dont have disconnect supervision or when trying to do accounting and billing on the user. Here is the 'normal' situation when a user tries the setup a 3 way conference once

Hey Y'all, Does anyone know where I can look, please post a URL, where I can find out what the minimum system requirements are for CentOS 6.4? I've searched the CentOS.org web site for this but I've come up empty. I've got an old machine that had RH9 on it. The HD died so I had to replace that. Now I'm thinking that I want to install CentOS 6.4 on it but the minimal install

Yesterday I upgraded my Zaptel to 1.2.26 or I think that was it, the latest 1.2 version at downloads.digium.com. I have a Digium 4 card populated with 4 red FXO cards using channels 1,2 and 4. Channel 3 is not used. It's been working fine for a few years. After upgrading to 1.2.26 calls stopped coming in on channel 1, Channel 2 still worked fine and I could get dialtone and make calls

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

Hi All. If anyone wants to help out with the asterisk track at the VON Developers conference, please let me know and I'll make the proper introductions. The 2004 VON Developers Conference will be taking place July 27-29 at the Marriott Pinnacle in Vancouver, Canada. More information is available at http://www.pulver.com/developers/ Best Regards Ed Guy

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems

samba@samba.org Serge Gavrilov <serge@pdmi.ras.ru> Ed Schernau <ed@schernau.com> Jeremy Allison <jeremy@valinux.com> Cristian POP <cpop@compas.dntcj.ro> Ed Schernau <ed@schernau.com> John Evans <samba@kilnar.com> David Bullock <davidb@loftuscomp.com.au> Gunnar Lindholm <gunnar.lindholm.320@student.lu.se> Junaid Iqbal

I changed the default player for MP3 files to xmms, if the file is local it works fine, if the file is on a network drive ( all my music is ) it has the movie player as the default player, any way I can change that, Thanks...