similar to: Digits being dropping when dialing from certain analog phones

Specs FC2, Asterisk 1.0.0, Zaptel 1.0.0 TDM400P Port 1 FXS Port 4 FXO Standard analogue handset plugged in with pstn line. Problem: When I go to dialout it drops numbers on the outgoing number. Keys dialed from handset were 9 0418800185 I tried hitting the keys slowly as well as at my normal speed, all tones are heard in the handset for all numbers.

Scenario, I got some very good help earlier from Joseph getting me up and started but I have a couple of small problems still. Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4 Analog dialout line and Analog handset plugged in. Problems: 1. Incoming calls work and the phone rings and can be answered no problems, (although I wouldn't mind being able to adjust the ring but

Hi, I have a weird situation where I have a noop command putting the callerid of the caller on my asterisk console so I know who is calling as a test, but it is putting the callerid of my extension in instead of the callerid of the incoming line. My /etc/asterisk/zapata.conf is [channels] context=default ;switchtype=national usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no

FC2 Asterisk 1.0 When I dial a H323 dialup to an existing OKI Voip Router (BV1250), I get an EndedByRefusal yet the OKI Gateway is setup with the corrent reply ip addresses etc etc, unfortunately its an existing multiple voip router setup with g723.1 and g729a, so changing the codec on the router maybe an issue. I have compile in the h323 as per the channels/h323 setup with the listed libraries.

Asterisk 1.0.7 Has anyone got the hint function working, and maybe with the GXP2000. I am testing with 2 GXP2000 phones (firmware 1.0.1.9) at the moment trying to get the LED's to light up. On ext 690, button 1 is setup for ext 691, I did this using both methods 691, and <sip:691@192.168.69.1> On ext 691, button 1 is setup for ext 690, I did this using both methods 690, and

Sorry to post such a newb set of questions but I have been hammering about trying to get Asterisk running on FC2 machine reading everything available (I think that is what stuffed me, shouldn't have read it all :-) ). Config FC2 running Asterisk 1.0.0, with the h323 compiled in and installed correctly. Amazingly enough I have everything compiled correctly and installed. I am running a

Hi, I am sorry to be asking this but the wiki is down and has been for a couple of days and I need to get this working before Monday to get my live system setup. Trying to get the Snom 190's and soon to arrive 3com 3102's to use the function keys and for the life of me I can't work it out from the conversations on the archive what I am going exactly wrong here? The snom 190 with

Hi Everyone, Merry Christmas :-).... My Asterisk Box doesn't have a sound card, it is running Asterisk 1.02 Zaptel 1.02 Libpri 1.02 Mpg123 0.59r All compiled from source with kernel 2.6.9-1.6 on Fedora Core 2 Any help would be very much appreciated..... The error I am getting is -- Executing WaitMusicOnHold("SIP/snom-james-849d", "30") in new stack Dec 12 00:27:29

Charles S. Antrim wrote: > I am using a card that has an fxo and fxs module. I am no where near an expert but I have my sip phone working through my pstn line and this is my config. /etc/asterisk/sip.conf [general] port = 5060 bindaddr = 192.168.69.1 context = sip disallow = gsm allow = alaw disallow = ulaw nat=disable srvlookup=no localnet=192.168.69.0/255.255.255.0 subscribecontext =

Hi all. I am seeing incoming calls from digital lines (mobiles e.g.) dialling my main number + 3-digit extension just fine ("Accepting voice call from '11234567' to '250' on channel 0/1, span 1"). The problem however is with calls from analog lines: "Accepting voice call from '13331846' to '25' on channel 0/1, span 1" * just sees 2 digits, not

Perhaps this will help... I have a phone connected to a QuickNet PhoneJack card. When I pick it up, I get a dial tone. When I dial a certain number of digits, the call is processed by Asterisk. The question: How does Asterisk determine how many numbers to let me dial? I'm banging my head against the desk here... _9XXXXXXX lets me make an outbound call, but _9X. only lets me dial 9 plus

I'm having trouble with a WX100USB adapter and a Siemens Gigaset cordless phone. If I select fxols as a signalling method, calls are being disconnected. Usually after about 4 minutes, and asterisk just says that the phone has hung up. If I choose fxogs, I immediately get a LINE IN USE message on my phone and I can't even get a dialtone. If I choose fxoks, it mostly works, but sometimes

Hey all, Working slowly on getting the myriad number of parts to my fax system plan together, and one of the pieces I want to nail is how to go about, for the outbound context (fax-out) pre-pending a digit onto a number? I.e., for all my testing right now, I've been dialing '91XXXXXXXXXX', as the asterisk server doing faxing junctions into my old Rolm CBX switch, and so I need the

I am testing analog phone and fax machine plugged into Rhino Channel Bank which is connected to TE412P card. This site is in China. I am running RHEL 5, Asterisk 1.4.21.2, Zaptel 1.4.11 and libpri 1.4.4 I ran into a problem which is analog phone can hear dial tone and can make outgoing calls. Another phone (ether internal or external) can call the analog phone ***but the phone does not

I've been trying to get Asterisk 1.4.X running under Solaris 10 x86 with limited success. I can build Asterisk and get it started but have run in to a problem with a segmentation fault with the "help" command in the CLI. When I start Asterisk: # ./asterisk -vvvgc Asterisk 1.4.9, Copyright (C) 1999 - 2007 Digium, Inc. and others. Created by Mark Spencer <markster at

Hi, Running Asterisk CVS-Head latest on a Dual P3 800 1Gb Ram. For some odd reason now that I have the asterisk box almost to the stage I want it, I hit a problem. I have a te405p in the system, Zap/g1 is connected to the telco as an ISDN 30, Zap/g4 is connected by ISDN Primary Rate to an Ericcson BP250 phone system. When calls come in on g1 they go straight through instantaneously to the

hi, I have an AGI running after an outgoing call file starts it up. Everything works fine except if my line has a problem. Trying to simulate this I unplug the line. So there is no dialtone. How do I detect this and let the AGI know so I can try line 2, 3, 4 etc... Detecting the the AGI or some other way is fine. I just need to know. I am using a TDM804B card at this time. Jerry

I've been trying to setup asterisk with an Internet Line Jack card for sometime. I've been successful in configuring asterisk to handle incoming calls, make calls between sip phones, call the asterisk demo, and even answer the phone with a sip client. I've been using x-lite as a sip client for my testing. I'm getting pretty close to how I want things to work, yet I've still

Hi, I have a problem with people that are calling from analog lines. We have a block of numbers 12345 - 0 to -99. Most calls are transmitting the whole number including the extension. There's no problem with that. But people calling from analog lines are connected to our asterisk box as soon as they finish dialing 12345. They don't get a chance to dial an extension. Just inserting a

Hi, I followed the how-to from http://www.alcatelunleashed.com/viewtopic.php?f=44&t=840 All works fine except for Asterisk->Alcatel calls. Actually, calls from Asterisk to analog extensions on the Alcatel work. However, calls from Aserisk to digital extensions on the Alcatel 4400 do NOT work. I get this error in the Asterisk log: -- Executing Dial("SIP/4053-0823dd48",