similar to: 'asterisk' displayed on my Cisco 7960 & 7912 ...

Hi! When I call a colleague of mine from my Cisco (via Asterisk), they get on their display: From Evert asterisk How do I remove/change the 'asterisk' part? Regards, Evert

Hi everyone! Who can tell me how I can access my voicemail? When I dial the voicemail on my Cisco 7960 I get access, but when trying to enter my mailbox number it seems that Asterisk doesn't 'get' any of the keys I press. DTMF problem perhaps? Any suggestions on how/where to fix this...? Regards, Evert

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

Hi everyone! I have a problem... We have received a couple of phone numbers for voip from a local voip-provider. The work fine directly with a Cisco 7960, but so far I've not been able yet to integrate them into Asterisk. I've tried: /etc/asterisk/extensions.conf ***** [ip-incoming]

Hi! If I install a CAPI-compatible ISDN-card in my server, will that: a) enable me to connect that server to the public phone net b) allow me to connect an ISDN phone to the server and use it as a SIP-phone c) all of the above? Regards, Evert

Hi everyone! situation: Asterisk-server A: 192.168.11.6 Asterisk-server B: 192.168.2.44 server B contains a register => username:password@192.168.11.6 But... when I boot it, I get: Registered to '192.168.11.6', who sees us as 10.138.3.2:4569 Why doesn't server A see server B as 192.168.2.44?? All other traffic going over these lines has no problems with this. The

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden

Hi all! I'm trying to have asterisk route all outgoing calls out via my VOIP provider. exten => _NXXXXXXX,1,Dial,SIP/BYEXTENSION@VOIP seems to have them to in the direct direction. However, debug shows that my asterisk doesn't identify itself correctly: Sip read: SIP/2.0 100 Trying From: "Evert"<sip:asterisk@[my IP]>;tag=as0aca53fa To: <sip:[dialled

Hi all, I have been looking at various alternatives for a system that runs several Linux & Windows guests. So far my favorite choice would be OpenSolaris+ZFS+RAIDZ+VirtualBox. Is this combo ready to be a host for Linux & Windows guests? Or is it not 100% stable (yet)? Greetings, Evert This message posted from opensolaris.org

Hi All, Just a heads up - I was looking around the Cisco FTP a little while ago and noticed that the SIP 7.2 images for Cisco IP Phone 7940/7960 were released yesterday (16th August). No new features - all bug fixes according to the release notes. I've already started using it. I thought those of you running the Cisco phones and the appropriate access who didn't yet know would like to

Hi all! We use a PHP-portal for management of our projects & contacts. Now I would like to make it possible to dial contacts directly from the portal. Since users have to log in, I can use that to determine which office phone the call should originate from. And the number-to-be-dialed is of course also listed. How do I commence here? I'm pretty sure others have done this already, so

Hi all! I'm in the process of configuring an Asterisk server here that, based on which number was called, should send calls to different extensions: 913 - 11111 -> ext. 1 913 - 22222 -> ext. 2 913-11111 & 913-22222 being 2 (of the) numbers we have coming in to our system via our VoIP hosting provider. The config used here is based on Asterisk at home, so it includes also the

Hi everyone! The following: Any calls coming in on extension 12121212 should get a message telling them to dial the extension of the person they are trying to reach, and then press #. The call should then go to the entered extension. This is as far as I got... *********************************************************** exten => 12121212,1,Wait,1 exten => 12121212,2,Answer exten

What headsets have people found work well with the Cisco 7940 and 7960 phones? To date, I have tried a couple of the headsets within the Plantronics H series (H41-N), and noticed that the volume of my speaking is lower over the headset than on the regular handset. I am currently looking for headsets that are known to work well. I do know that Cisco lists the H-91 and H-101 as certified to

Hi! Problem with my 7960. Outgoing calls work, but incoming don't. A 'sip show peers' gives: Name/username Host Dyn Nat ACL Mask Port Status 105/105 192.168.2.175 D 255.255.255.255 5060 UNREACHABLE Is there something wrong with the config on that phone? If so, who can tell me what? Regards, Evert

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

I have a Cisco 7940 when you call in from outside and dial the Cisco phone extension I get this Read_channel ## vpb/1-3: Setting record mode, bridge = 0 WARNING[18451]: File chan_sip.c, Line 1111 (sip_write): Asked to transmit frame type 8, while native formats is 4 (read/write = 4/4) == Spawn extension (default, 1004, 1) exited non-zero on 'vpb/1-3' -- hangup on vpb (vpb/1-3)

Hi, ( As a total newbie to R ) I get this error when attempting to use read.table to read a data frame: "Error in type.convert(x, na.strings, as.is) : null string encountered" (Is there help documentation for the type.convert function ( I could not find it in the usual places) This does not always happen, but seems to occur when I am attempting to read data frames with more than a