similar to: Transfering incoming calls using same line

Hey All, I have a question that I'm curious about. I want to set up a 4 phone system in my home with 2 actual lines coming into the house. Both or just regular lines (not sure of this matters?), one being VoIP and the other just a regular analog line. For now though I just want the VoIP line coming in, but would like the ability to expand to 2 lines in the future. What type of hardware is

Hey all, I'm trying to get my Asterisk server up and running on fwd.pulver.com just to get the hang of it until I get my FXO card in a couple of days. It seems to connect but that's about it. If I try to dial into it from another fwd # it says user is not online. In sip.conf I have the following added: register => xxxxxx:xxxxxx@fwd.pulver.com/489125 [fwd.pulver.com] type=friend

Hello: I want to have a local telephone number that, when the people calls this number (via mobile or normal PSTN), the voip provider stablishes a SIP session to my asterisk box. It is possible? If yes... What providers have this service in Europe? It is difficult to configure and get things working ok? Will my asterisk box see the mobile or normal PSTN phone# that is calling the number

Hi, I'm getting unusable DTMF detection with DISA on incoming ZAP channel (bristuffed *) on quadbri from GSM gateway. DTMF detection works ok in normal ISDN incoming line. How can I check what's going on ? What settings to check ? Anyone with more experience on such scenarios ? Thanks in advance, regards, Rob.

hi folks. i have the following puzzle: when i call certain cell phone# using a regular phone & POTS. the called cell phone co. usually return a message such as phone travel out of range or phone is busy etc. if the phone is unreachable. now when i have the following setup: sip phone -> asterisk -> PRI -> phone co. i call the same cell# and if it's unavailable. the PRI return

I'm having troubles... I am new to Asterisk and SIP. I was just given this setup and it was running fine. And somehow it stopped. I thought it was the DID(again) But it wasn't. All calls are getting rejected. **************************************************************************** Called 1403(Phone#)@###.###.###.### -- SIP/###.###.###.###-1c69 answered Zap/83-1 -- Got

I have an app that generates callfiles in the outgoing queue, which connect a channel to an AGI (Perl script) at an extension. The AGI calls the Dial command over a SIP channel. Sometimes I need to stop the outgoing calls after the requests have been made. I delete the callfiles from the outgoing directory, but there are still some calls "in the pipeline". Especially if Dials failed at

Hi I was wondering if there are any special settings that I need to be able to transfer calls. Whenever I press the 'recall' button, I just here a click, and no ring-tone to transfer. in my debug log I get this : -------------------------- Feb 24 09:09:27 DEBUG[19216]: Exception on 10, channel 1 Feb 24 09:09:27 DEBUG[19216]: Got event Pulse Start(14) on channel 1 (index 0) Feb 24

Problem: Flash on X100P does not flash. Phone line has Call Transfer. With this line plugged into a regular phone, it can receive a phone call. Then, depress the hook momentarily, release. Dialtone is now available. Dial a different number. Call is answered. Hook Flash again, now in a three way call. Hang up. The other two parties are still in communication. Now, plug same line into the X100P.

Yes and No The D500 is a terrible thing First problem: it sends some horrible DTMF, so if your voicemail is configured to send #H and *H, it will not work, configure it to send numbers, like 8H and 9H (H is a placeholder for the extension). I also managed to use the MWI (message light), it's a perl script that is in voip-info.org, but with a little correction because the wiki distorted it. If

I was just trying to find a better way to transfer incoming calls to external phone numbers without tieing up my lines. The following has worked successfully for me and I just thought I'd post it so if someone was looking to do the same they could quite easily. The feature you need installed on your lines is called conference-drop-transfer or here in canada it's know as

Hi, What is the correct chan_capi dial syntax?? This is what I think it is.. exten => _90.,1,Dial(CAPI/[msn here]:${EXTEN:1}) This seems to work for local numbers.. but I have an access number for cheap long distance calls.. wich gets dialed and then the number I want to call is sent as DTMF after a few waits (w).. On my X100P I used the following.. exten => _9001.,1,Dial(Zap/1/[access

Hello, This morning, I asked myself if WebRTC could be a viable alternative to softphone deployment. For me, main issue with Softphones is the amount of work needed for installation and configuration. Also, Softphones must be carefully choosen if Deskphone-like quality is expected. Now that WebRTC becomes ubiquitous, it might make sense to trade Softphone features (call history, BLF, ...) for

The patch enables x86_32 PAE unmodified guests on 64-bit Xen when the hvm feature is present. We tested only Linux at this point, and we''ll improve the functionality as we test other guests. The SVM needs the equivalent changes to the vmc.c to get this functionality working, but this patch does not break the build. Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>

Dear list, I have problems with DISA on an specific server with Asterisk 1.4.26.2. After starting DISA I can only press one key and DISA is jumping direct into the context without waiting for further digits. In dtmf.log I found this: [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin '7' received on SIP/214-00d92db0 [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin passthrough

Folks, For the last few days I've been trying to experiment with a Panasonic PBX and an X100P but have run into quite a few problems which I am not sure if they can be solved with this type of card (how about TDM01B?) 1) I wanted to use *'s IVR capabilities, so I routed the calls to the extension where the x100p was connected to. Asterisk should answer the call, playback a message,

changeset: 11011:b60ea69932b1 tag: tip parent: 11010:e4f1519b473f parent: 10999:15304ad81c50 user: kfraser@localhost.localdomain date: Wed Aug 9 12:04:20 2006 +0100 summary: Merge with xenppc-unstable. Hardware: x460 NOTE: This runs were done with the latest version of Harry''s disk.iso patch. ******************** x86_32(no PAE):

Hi guys, I am trying to use DISA. The scenario is - I call my home number (where X100P seats) from mobile phone, enter the password, enter international number and get connected via voiptel. It works perfectly when I call extension setup with DISA from X-PRO SIP phone, but when I dial into Zap, It seems that it does not detect DTMF tones. Here is a log and config files Please help

Hi guys, I found the troblue and fix it! I attached the patch. The trouble was in the command reply buffer use. You compute the value that value = reply[6]*256+reply[5] <- it's wrong The right solution: value = reply[5] * 256 + reply[6]; And other bug, battery.runtime compute, you divide this value 60 <- it's wrong right value: divide 1.0 I continue the work on this

I've got a new setup (different building) where Asterisk is sitting between the PBX and phone company on a E&M T1 line. Mitel PBX <-> Asterisk <-> Phone company Inbound works. Asterisk gets the in-band digits from the phone company and hands the call off to the Mitel just fine. Outbound is weird. Asterisk seems to expect that the mitel will send routing information