similar to: Canreinvite=???

-This is my 'sip.conf' file: ;************************************************************* ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls tos=184 maxexpirey=3600 ; Max length of incoming registration we allow

Sorry for the partial post a moment ago With help I got two phones communicating - PCMA/PCMU was the problem. Next stpe is to try voicemail. VM works fine, I can leave a mesage and then retrieve it - but no MWI on the phone and no stutter dialtone. I promise I've spent the requisite 4 hours + on google etc. but have really no further ideas. The setup is 2 Grandstream phones (latest

I put canreinvite=yes in my sip, for a sipura 3000 and a xlite, however, if I call the traffic still go throw the asterisk. How come? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060617/8f4449fa/attachment.htm

Hello. I had grandstream working fine to FWD through my firewall. Now I want it to talk to the asterisk server. Did lots of reading, attempts but I keep getting registration errors even though I can call to/from the sip phone from an analog phone on a tdm400 card. Basically. grandstream = 192.168.1.70 asterisk = 192.168.1.1 The error I see is ;- -- Executing Dial("Zap/2-1",

hi, I have the following configuration: Grandstream --> NAT (Netgear RP614)-->Internet-->Asterisk(public IP) i can register fine and call ringing is working as good. The problem is = i cant hear audio both ways and i get this error: WARNING[22544]: File rtp.c, Line 375 (ast_rtp_read): RTP Read error: Resource temporarily unavailable my sip.conf file is as follows:

Hello, I've signed up for a NuFone account, and added the following instructions to my config files per NufFones directinos: iax.conf [NuFone] type=peer host=switch-1.nufone.net secret=password extensions.conf (under the [default] context) exten => _1NXXNXXXXXX,1,Dial,IAX2/f00b3r@NuFone/${EXTEN} I then get this message in the CLI: -- Executing Dial("SIP/jake-fe5d",

been testing with a rather simple setup. The mission is to actually get a reinvite to work on the lan. I am trying with two sipura phones G.711 codec forced on both both on the lan no nat no fancy options suchs as tT or H No matter what we do asterisk hangs on to the media path, how in the world do I get a reinvite to work where the media path is actually handled by the two phones on the lan?

Hello All, Been completely obsessed for the last two days with VoIP and Asterisk - running on 2 hours sleep and coffee - sorry if this is a little scattered... Okay, I've got a small start-up company that installs traditional PBX (Nortel mainly) systems, data network infrastructure, commercial audio/video, residential audio/video/voice/data and we do lighting control systems... I've

Hello, all. In our multi-tenant environment, we would like to be able to use the reinvite media redirection within Asterisk for calls within a tenant but not between tenants. We would like inter-tenant calls to be fully proxied by the Asterisk server. I think the answer is, "we can't," but I thought I'd ask anyway. I'd dearly like to remove the substantial traffic

Hi, I'm having trouble explicitly forcing a codec between sip devices. Am I missing something or is this not really possible? I have a grandstream registering to asterisk, named sip0. Sip0 registers, via sip, to another asterisk box, sip1. When I place a call from the grandstream, it will travel through sip0 to sip1, where it is then placed to the PSTN. Nothing can reinvite, this path is

Hi, I have asterisk on public IP and phones in two locations behind firewall/nat, - when I have nat=yes and canreinvite=no, this is working fine, but rtp stream must go _always_ through asterisk, even if phones talk inside their locations - when I have nat=yes and canreinvite=yes, phones can speak only inside their location and rtp stream is connected directly between phones (this is, imho,

Hi, i cant make a three way call using grandstream phones (BT-100) and asterisk using sip, is this supported or i need a zap interface? thanks

Hi Folks. I see that can put 0 to call out using a x101p (zaptel) or even a pstn service. Thats great, but when press the 0 i just dial then the numbers to call out. There is any way after hit 0 (ear) the line sound ?? I know it's just a style way put some users, really like it !! So after hit 0 to call for example a pstn the user will ear the line sound to dial out. I read lot's of

I'm at my wit's end! I've spent 2 days now trying to get what I thought was a very simply SIP + NAT arrangement working. I've trawled the web and picked brains, but nothing anyone suggests work. My setup is very simple. I have a * server in a datacentre, with a public IP address. There is no firewall in place, it's completely open (at least, as far as I'm concerned). I

Just got GS 101 phone and plugged into the network. Got ip setup however, the following problems arise: 1. when dialing an extension, I cannot further send any key tone to Asterisk. 2. there is no sound coming from the other end. I have a sip.conf setup for GS: [General] disallow=all allow=ulaw allow=alaw [gs] canreinvite=no dtmfmode=info In the GS101 setting rtp port = 5004 sip port = 5060

Should it work to have a multi-homed asterisk server with grandstream phones on the internal network and another grandstream phone on the internet and be able to call between them? I set the bindaddr to the external IP and pointed the internal and external grandstream phones to that address. The signalling works fine to call between phones, but when you pick up the ringing phone you get a

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

I have spent the morning on this project, still without success. Summary: Yesterday I inadvertently unplugged my Grandstream phone. I might add I did a rebuild of my s/w from CVS at the same time. Since then, the Budgetone seems to talk SIP just fine, but the RTP being sent to it by asterisk "doesn't make any sound." It was suggested I do a factory reset of the phone, which I

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

Hi...I've got two Grandstream phones attached to my Asterisk on the same subnet. The phones have fixed IP addresses. Asterisk is generated an error for one of them only, even though both appear to be registered correctly. The current state of the sip.conf is included below. Anyone know what is going on here? Both appear to be working fine between each other and between themselves in and