similar to: Audiocodes Mediant 2000

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

I just put in a Audiocodes Mediant 1000, which seems to be working well except for one annoyance. I am using Polycom 501's and 601',s and if I do a supervised transfer of a PSTN call where I complete the transfer before the 3rd party has answered, the PSTN party hears dead air until the call is answered or goes to voicemail. I'm not really sure where to start my troubleshooting. Any

I have a Quicknet Linejack. Actually, I want to make a standalone(no internet connections) call to my asterisk box running GNU/Linux. When I call the system it says: -- Executing BackGround("Phone/phone0", "demo-congrats") in new stack NOTICE[14349]: File channel.c, Line 1212 (ast_set_write_format): Unable to find a path from 2 to 1 WARNING[14349]: File file.c, Line 553

Hi, I am configuring an audiocodes Medant1000 to talk to my asterisk box. So far I have successfull in landing a single call from mediant to my *box. my sip conf is as follows: [general] context=sip bindport=5060 bindaddr=0.0.0.0 srvlookup=yes [3911700] type=friend host=dynamic dtmfmode=info secret=blah context=sip where 3911700 is my E1 telephone no. in my extensions.conf I have exten =>

I sent this yesterday, but saw zero traffic, so I think it got lost in the ether, so I'm sending again. I'm having an issue using Asterisk 1.2.14 and an Audiocodes Mediant 1000 ISDN gateway. For the most part, everything is working except for attended transfers. When I do an attended transfer, and complete the transfer before the 3rd party answers, the PSTN side hears dead air until the

Hi, This is my first experience with a mediant 1000 and an Asterisk Trixbox. the mediant has 12 FXOs and 12 FXSs, and I want to use it them all. I will have extensions connected to the FXS ports, and lines to the FXO. Can anyone guide me, please? regards, -- Guillermo Garron "Linux IS user friendly... It's just selective about who its friends are." (Using Ubuntu, Debian,

Hi all. I've been lurking here for a couple weeks just trying to get an idea of how to install asterisk. I'm running Debian with a custom kernel version 2.4.18. I think I've got all the dependencies installed - debian packages readline4 and openssl are installed. It's a very barebones install with only the packages relevant to building a kernel and asterisk installed. The

Greetings... I'm working on getting an AudioCodes Mediant 2000 big box o' PRI's going with Asterisk, and am running into a problem with DTMF handling. The box is sending DTMF packets to Asterisk as INFO packets, and they are apparently being seen by Asterisk. However, the DTMF knowledge doesn't seem to actually do anything -- the VM system doesn't recognize the digits,

Thanks James, What i need is to make the fax machines connected to the audiocodes mediant 1000 be able to send and receive fax throught Asterisk (connected to a pri) I know it's not reliable, but it should work at leaste, what should i do on Asterisk and Mediant to make this work? Im quite confuse with all these fax issues :S Thanks in advance > > Message: 11 > Date: Fri, 9 Apr

We're experiencing an issue where calls disconnect after 15 minutes. It seems to happen just after Asterisk sends an update mesage. RTP is being set up directly. Asterisk is only in the SIP dialog. Has anyone experienced this issue? 4 PRIs inbound, 4 PRIs outbound, asterisk provides switching. SIP/2.0 200 OK Via: SIP/2.0/UDP 38.XXX.XXX.XXX:5060;branch=z9hG4bK1c4b524f From:

I was told the X100P will have issues if installed on a line with a DSL connection. Is there a card that will work correctly on a DSL connection? Thanks!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/6de6226b/attachment.htm

I have a setup with a polycom 601 and an act p160s. All on local segment, no NAT. Can call the act p160s, from the polycom, rings, connects, and a conversation can take place. The reverse is not true, Dialing from the act to the polycom does not work. SIP debug shows, at the end, "Incoming call: got sip response 416 "unsupported URI Scheme" back from 192.168.0.xxx. Which is

Why hasn't someone found 50 people who sound alike, put them in sound studios and record the 10,000 most commonly used words. You would all differnent forms of the 1,000 most words, i.e. leading, trailing, question etc. You can synthesize the other 0.05% when you run into them. With hard drives so big, processors so fast and EXT3 that can handle 30,000+ files in a single directory that

Dear all anyone have idea about connect asterisk with mediant 2000 audiocode configuration ... anybody have configuration about it --------------------------------- Get your own web address. Have a HUGE year through Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL:

[I hope the repost isnt'' "minded". Following the advice of another thread I''ve changed the subject to a question. If I haven''t included important info, please ask. My database is being unduly killed. Jodi] Cheers on-the-Rails-ers, Before I start, I''ve read the ActiveRecord docs on eager loading, but for the life of me, I can''t seem to get

Hi Isamar maybe I think disclose your code to CVS is best and fast :-) mack > > Hi folks, > > I'm trying now to play with fsk_modem.c and callerid.c > to get the Japanese callerid working and I already got to make some > steps.. > I don't know if anybody accomplished that already... but > Since two or more minds think better than one, send private messages >

I get this a lot. It eventually succeeds in registering, but can take a minute or two. Michael -----Original Message----- From: Isamar Maia <isamar@isamarmaia.org> Sent: Dec 21, 2003 10:45 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] FWD / Timed out Hi Folks, I can ping fwd.pulver.com with no problem but not getting to register with them... NOTICE[4101]: File

Maybe it is trying to say "i" as a digit? You could have an [invalid] context with [invalid] exten => _.,1,Saydigits(${EXTEN}) and then include it at the very end of the [default] context (or wherever you want to use it). That would then pick up anything that drops through. If you do it any other way it will get sorted to the top and you will have trouble! Peter -----Original

The advice i was given was to spend the license money on a digium card and sell the dialogic on ebay! Whilst the digium card requires more from the host processor and may not be approved in as many countries as the equivelent dialogic, I think that for most cases the advice was sound. Actually, I kept the dialogic card, but that was for support purposes. Tim. Isamar Maia