similar to: IAX2 call drop

I'm trying to come up with good jitterbuffer related settings for my Asterisk boxes. I ran 4 pings for about 2 days from my main Asterisk server to remote Asterisk servers. During that time there were some large file uploads which caused the max rtt to be quite large. Here are the results: pkts loss min avg max mdev 132013 %0 70.36 78.13 1967.37 36.04 132013 %0 98.95 120.46 2419.24 111.26

Hi all, I have a VOIP phone with the PA1688 chip; my firmware is V1.42.028. This IP phone is registered in an Asterisk PBX and I've a problem when I dialing internal number. If I dial an internal number, like for example 102, the IP phone takes 35 seconds to send the number to Asterisk; here below the debug output 192.168.0.75: first 192.168.0.75: 1 192.168.0.75: 10 192.168.0.75: 102

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'

Hi all, I'm a newbie and I have a configuration problem with Asterisk. Seems that I'm not able to call an outbound number. I'm quite sure that it is a configuration problem, but I'm not able to find out where is the mistake, even reading several docs to www.voip-info.org. I do not have a good knowledge of Asterisk, I'm not very familiar with its configuration and I've a

G'Day, I have a bit of FireFly problem that hopefully someone has seen before. What happens is if I make to or receive a call from the FireFly network the call will connect successfully. However, around 10 seconds after I answer the call I am disconnected. The weird thing is same thing happens if I make a call. I've had a look at the * console and I can't see that my * PBX drops

Hi, I've got a relatively simple tinc setup. I've got two "servers" that are on the public internet that act as routers for three "clients" that are behind NATs. Those servers are called aaaaa and bbbbb the clients are xxxxx, yyyyy and zzzzz Unfortunatly the servers have problems accepting a connection from the clients syslog on aaaaa: Sep 29 18:28:58 schuerrer

Samba 1.9.18p8 / Linux 2.0.33 I've got a problem restoring a tar archive, with subdirs inside, using smbtar from the Linux server to a win95 pc. I made the tar with smbtar. When restoring to a win95, the subdirs are not restored ('aaaaa' is a directory): ... restore tar file \badday.mpeg of size 425988 bytes Updating creation date on \aaaaa\ ERRDOS - 50 setting attributes on

On 24/10/15 18:18, Jonathan Hunter wrote: > Thanks Rowland - appreciated. > > I have checked the ldbsearch result and both groups look to be pretty > much exactly the same to me, one of them is shown below (I have > sanitised some of the output, replacing parts with 123/a/b/c, but the > rest of the output is byte for byte as seen) > > In the time between posting my original

Thanks Rowland - appreciated. I have checked the ldbsearch result and both groups look to be pretty much exactly the same to me, one of them is shown below (I have sanitised some of the output, replacing parts with 123/a/b/c, but the rest of the output is byte for byte as seen) In the time between posting my original message and checking again just now, however, I have the following additional

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

Dear friends, How do I stop partial matching of list names? e.g., x <- list(AAAA="aaaaa", BBBBB="bbbbb") is.null(x$A) #returns FALSE even though there is no element A. if(is.null(x$A)) {result <- x$BBBB} else {result <- x$A} result #is aaaa even though there is no x$A element x <- list(CCCC="aaaaa", BBBBB="bbbbb") if(is.null(x$A))

I'm installing TE405P card. This is my zaptel.conf. -------------------------------------- span=1,0,0,ccs,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 loadzone = us defaultzone= us -------------------------------------- When i modprobe wct4xxp, -------------------------------------- PCI: Found IRQ 11 for device 02:0b.0 PCI: Sharing IRQ 11 with

On Fri, Feb 13, 2015 at 9:57 AM, Ken Smith <kens at kensnet.org> wrote: > Hi All, > > I'm just wanting to check that my understanding of the settings is correct > as my web searches are finding a lot of dated information. > > If I want a Centos 6 sendmail system act as the secondary MX for domain > bbbbb.co.uk do I just add a > > Connect:bbbbb.co.uk

Hi all, i've got a problem in authenticating users from a trusted domain with pam_winbind. smb.conf is: [global] workgroup = AAAAA server string = CC-Server (SMC CI, Samba %v, %h) security = DOMAIN machine password timeout = 0 log file = /var/log/samba/log.%m log level = 3 max log size = 1000 debug pid = Yes debug

On Fri, February 13, 2015 10:57, Ken Smith wrote: > Hi All, > > I'm just wanting to check that my understanding of the settings is > correct as my web searches are finding a lot of dated information. > > If I want a Centos 6 sendmail system act as the secondary MX for > domain > bbbbb.co.uk do I just add a > > Connect:bbbbb.co.uk RELAY > >

Hi All, I'm just wanting to check that my understanding of the settings is correct as my web searches are finding a lot of dated information. If I want a Centos 6 sendmail system act as the secondary MX for domain bbbbb.co.uk do I just add a Connect:bbbbb.co.uk RELAY statement into /etc/mail/access and restart sendmail Obviously I have the DNS MX records for the domain are

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

Owen, As I recall, we had some similar issues with custom decoders needing to cooperate on ARM. Do you remember the details? -Jim On Dec 18, 2012, at 2:37 AM, Richard Osborne <richard at xmos.com> wrote: > I'm currently trying to get llvm-mc --disassemble working for the XCore backend. Up until recently there was no instruction encoding / decoding information on any of the XCore

Hi all, I am using RStudio. I wanted to copy and past an expression/line. I highlighted it, and then copied and pasted: The result was not the line that I wanted, instead, it was the line above... For example: I have three lines: aaaaa bbbbb ccccc .... I highlighted "bbbbb" and copied, but the pasted outcome was "aaaaa"... What happened? Thanks al ot! [[alternative

Hello all. I am sure that this is an FAQ but I cannot find a succinct answer anywhere. My question is: What is the correct way to access a Samba share when the Samba server has a private IP adress (eg 192.168.x.y), the (Windows via PPP) client is assigned a relevant private address (eg 192.168.x.z) and the username/password used to login to the client is not known to the server and/or is