similar to: Requested device 'ttyI1' does not exist

Hi, Apologies in advance for the lengthy email. I'm new to asterisk and have trouble with isdn4linux. The setup is very basic like this: winxp ------- asterisk -------- winxp x-lite | x-lite | pstn The hardware involved is: Compaq EVO with RH9/kernel 2.4.20-30.9. Fritz!Card PCI v2 Asterisk CVS-04/17/04-21:36:18 Basically

All, Currently I've got my Asterisk machine running smoothly on IP bases. Meaning I can reach all phones or softphones within my LAN or remote LAN's via VPN. The next step for me is connecting it to the PSTN network. After some tweaking with the modem.conf I got the i4l driver running correctly, and it appears that my Fritz! ISDN v2 card is working correctly. I have added the

We have setup an asterisk box to let everybody call into the university internal network, but I get unexpected hangups when doing an outbound call from SIP to the ISDN interface, and it happens from 20 seconds to some minutes into the call. ----------the dial and the problem----------- -- Executing Dial("SIP/57966-a19d", "Modem/g1:96121||rt|") in new stack --

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

Hi all, this is a rather "newbie-oriented" question, so please bear with me... The system running Asterisk has been provided with an AVM FRITZ!Card PnP. SuSE Linux 9.0 recognizes it right after booting the system and it seems to be configured (MSN) correctly... The hwinfo looks like this: --- pbx:/etc/asterisk # hwinfo --isapnp 11: ISA(PnP) 01.0: 10300 ISDN Adapter [Created at

hi, i installed asterisk and works very well, the only problem is that when i try to call a direct number of a company that has a normal PBX i got this error: to 10.8.210.153:5060 == Accepting call on 'SIP/a.sampietro-f7be' (a.sampietro) -- Executing Goto("SIP/a.sampietro-f7be", "doisdn|BYEXTENSION|1") in new stack -- Goto (doisdn,00115601992,1) --

hi ---------modem.conf :---------- msn=240862922 incomingmsn=240866365,6365 device => /dev/ttyI2 group=1 device => /dev/ttyI1 ; ttyI3, ttyI4 ---------extensions.conf ;------- [sip] exten => _XXXXXXXXXX,1,Dial,Modem/g1:BYEXTENSION (Sjphpone) Call to : 024076xxxx result : --Executing Dial(Sip/roseau-6163","Modem/g1:BYEXTENION") in new stack -- Called g1:024076xxxx --

What I've got... Software: Linux: Slackware 9.1 Asterisk: out of CVS - so its new. isdn4k-utils: to test the ISDN Card Hardware: PII Pentium 400Mhz (Its a test of concept machine) with 320Kb RAM 1 x ISDN BRI Card - DIVA EICON (Installed + working) 2 x Grandstream (Barbie?) BT100 SIP Phones. What Works.. I can call from one phone to the other... get read voicemail... I can

hi, I am new to * and setting up a test system. here my setup : - debian (from knoppix 3.3) - Asterisk 0.7.1 (from the debian package) - AVM Fritz card used with i4l - softphone I use for testing SJphone on windows - I can make great softphone - softphone calls - I can call from an outside line * and get connected to a softphone here my problem: I can not make outbound calls. I place a call

I'm trying to use an hfc based pci card with asterisk but every call fails falling in the congestion extension. exten => _0.,1,Dial(${TRUNK}:${EXTEN:${TRUNKMSD}}||tr) exten => _0.,2,Congestion Looking in the syslog i can see: isdn: HiSax,ch0 cause: E001B it seems that this is a terrible error when arrives... hard to tell what is the cause. Also terrible is finding a lot of material

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set CONFIG_ISDN_DRV_HISAX=y

Hi, i install the Asterisk PBX on a linux machine with i4l to connect to PSTN (EuroISDN). And i configure a very simple dial plan in extension.conf. After this, i connect with a SIP program to asterisk and would call my cellular phone, but got this error: -- Executing Ringing("SIP/ACzerniak-0904", "") in new stack -- Executing Dial("SIP/ACzerniak-0904",

In this message I try to summarize what I have learned in these last two weeks. My primary sources of informations were the * list archives and linux ISDN docs. I ain't no * master, so don't trust too hard. Relevant messages from the * list for the current discussion are: 009177.html 009268.html 0498.html 0849.html My setup is an Eicon Diva (HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2)

hi I have a passive isdn port configured in modem.conf in extention.conf i use this two channel (ttyI0 and ttyI1) with the string: exten => _NXXXXXXXXX,1,Dial,Modem/g1:${EXTEN}|60|r how can i hide my msn? is it possible to activate the clir with the @ before the ${EXTEN}? thanks Cristian

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing

Hi, I have a problem that I just can't figure out how to solve. I start *, dial it using a ISDN phone over PSTM, to a Hisax card installed in * I get the demo-greeting, listen for a few seconds and hang up. I dial it again, but this time the first second is sound from where the previous call ended, then the greeting starts as it should. Right now I have removed all codecs but codec_gsm.so

Hello all, This new version (0.6.1) of asterisk-oh323 fixes the "one-way audio" problem of the previous release. Download from the usual location: http://www.inaccessnetworks.com/projects/asterisk-oh323 Regards, Michael.

Hi *, This is my first message to this list, so I hope I am not breaking any rule with my post. My question is the following: can I establish a voice connection over an ISDN interface by using a bluetooth dongle to connect to the ISDN access point? Here follow the details: I have compiled and configured asterisk. Everything seems fine except that when I configure asterisk to use the ISDN

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

The card is an ASUSCOM ISDNLink PCI (passive) and the circuit is from Qwest (in the US). I will be using this circuit only for voice (I'm doing this because of the poor quality of my POTS lines). I've compiled Hisax (as a module) into my 2.4.25 kernel, and with 'modprobe hisax type=35 protocol=4 id=hisax' I get the following: Apr 7 10:34:24 dev kernel: HiSax: Linux Driver for