similar to: chan_sip2 Install Question

Hi, Does anyone have any detailed install instructions for setting up chan_sip2.. I patched acl.c but could not see an acl.h file to apply the patch.. I copied the chan_sip2.c file into the channels directory.. I am not sure what I need to do exaclty in the Makefile to get chan_sip2 to build.. Any help and anything to be careful of in chan_sip2 would be usefull.. Thanks, Later..

Trouble getting chan_sip2 to compile below is what I have done -download acl.c.patch,acl.h.patch,chan2s_sip.c to /root/software cp /root/software/chan_sip2s.c /usr/src/asterisk/channels cd /usr/src/asterisk/ patch -p0 acl.c /root/software/acl.c.patch cd /usr/src/asterisk/include/asterisk patch -p0 acl.h /root/software/acl.h.patch - added the follow to /usr/src/asterisk/channels/Makefile

Hello, new to asterisk and trying to set it up to work with my voip provider (vbuzzer.com). I am behind a firewall that I don't have access to, to open ports etc. Before using asterisk, I tried vbuzzer's windows client, and linphone and twinklephone which all worked without having to enable nat or stun. However I did have to enter the outboundproxy server to get them to function. Not

Hi all, I try since few days to register to FWD with chan_sip2 and always been disconected: peer TOO LAGGED and then peer is now REACHABLE! and so on. Now I restart asterisk with chan_sip and get it work. So for me it's chan_sip2 which is broken,*only with FWD* (at least for me) as I have others SIP providers and it's working fine with them. I use a CVS version of asterisk from

In the latest release of chan_sip2 I've added support for SIP Outbound Proxy. I've seen a lot of requests for that lately, so if you can test this and confirm wheather it works for you or not, I'll be grateful. If I get positive reports, we'll try to add this to chan_sip in CVS. It works like this: * Configure outboundproxy in the general section of sip.conf outboundproxy =

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

When I try to connect to * using a Cisco ATA 188 configured with a MGPC firmware (v3.1.1), I just keep getting this message every 30 seconds or so : May 10 10:08:21 NOTICE[7913]: chan_mgcp.c:1509 find_subchannel: Gateway '192.168.1.27' (and thus its endpoint '*') does not exist Using tcpdump, I have checked that the ATA188 (with IP 192.168.1.27 and port 2427) sends UDP packets to

Here are the linker errors: lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: __data_start__ lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: __data_end__ lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: __bss_start__ lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: __bss_end__ lld: warning:

Is that the only problem to use lld to link cygwin programs? On Thu, Feb 8, 2018 at 8:19 AM, Andrew Kelley <superjoe30 at gmail.com> wrote: > Here are the linker errors: > > lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: > __data_start__ > lld: warning: libcygwin.a(_cygwin_crt0_common.o): undefined symbol: > __data_end__ > lld: warning:

Hi, My asterisk's version is 1.6.0.26. I've couple sip providers and I've for new SIP provider I need define outbound proxy. Everything is ok in peer section (outboundproxy=192.0.2.1). But what about SIP REGISTER messages? I need send SIP register messages also via outbound proxy. How to write SIP OUTBOUND call register statement and send this to proxy? If I define in general

Thank you very much for all feedback on Asterisk Sunday News! This is the last issue for June. This week I'll go on holiday and will be back with more news in early July. My kids are getting summer leave this week and we'll be visiting the south of England for a while. Another part of Europe that still use their own currency. If you think there's an European standard, you're

Hi All, I'm connecting to my carrier which requires setting of outboundproxy. There has been few cases where the proxy server failed due to network issues and required us to use a secondary one. Is there a timeout or qualify setting for outboundproxy setting in sip.conf? I do appreciate if anyone can help please. Thank you -Abeed -------------- next part -------------- An HTML attachment

I'm having some trouble turning with trunk monitoring while using an outbound proxy. While all other sip messaging (e.g. calls) respects the outboundproxy setting, Options packets from setting qualify=yes do not. Asterisk tried to send the Options message directly to the "host=" IP, instead of the "outboundproxy=" IP as it should, verified with tcpdump. I've done a

On 16-08-16 04:38, George Joseph wrote: > > > On Mon, Aug 15, 2016 at 1:24 PM, Jonas Kellens > <jonas.kellens at telenet.be <mailto:jonas.kellens at telenet.be>> wrote: > > Hello > > using pjproject 2.5.5 > using asterisk-certified-13.8-cert1 > > > IIRC there were API changes in pjproject 2.5 that aren't accounted for > in

How do you configure an outbound proxy for Asterisk? If the sip call is not local I want everything to go to a designated sip proxy. Thanks, Chad -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/bdd57a91/attachment.htm

Is it possible to set an outboundproxy for REGISTER from Asterisk? register => xxx:yyy at sip99.foobar.com [foobar] type=peer host=sip99.foobar.com disallow=all allow=g729 canreinvite=no secret=yyy fromuser=xxx port=5099 outboundproxy=xxx.42.149.69 However, SIP REGISTER still goes directly to sip99.foobar.com, not xxx.42.149.69. Thanks, Doug.

Hi, I'm trying to enable sip.conf outboundproxy support in version 1.4.20.1 of Asterisk, but for the tests I made, every calls, even internal SIP calls between extensions are sent over the proxy that I have specified with the outboundproxy=xxx.xxx.xxx.xxx in sip.conf. I think this isn't the expected behaviour, right? Only OUTBOUND calls should go through the proxy, right? Am I doing

After browsing through bugs.digium.com I saw no mention of any work to get chan_sip or chan_sip2 to listen on tcp, as well as udp. Just curious is any-e-one working on such a patch at the moment?

Hi :) I've had all this working before, but I'm revisiting it, and in short, I currently have huge problems receiving incoming calls. I've been trying with both FWD and voiptalk.org. I'm running CVS HEAD of asterisk, zaptel and libpri as of yesterday afternoon. Would someone mind helping? :) My machine is 10.0.0.1 on my LAN, but the ADSL router has 10.0.0.1 set as the 'DMZ

On 16-08-16 17:45, George Joseph wrote: > > > On Tue, Aug 16, 2016 at 3:21 AM, Jonas Kellens > <jonas.kellens at telenet.be <mailto:jonas.kellens at telenet.be>> wrote: > > On 16-08-16 04:38, George Joseph wrote: >> >> >> On Mon, Aug 15, 2016 at 1:24 PM, Jonas Kellens >> <jonas.kellens at telenet.be <mailto:jonas.kellens at