similar to: WellGate 3504A with Asterisk SIP authentication and config

Greetings to All! Help to solve a problem: There is an asterisk and two VoIP a sluice (NSGate 800 2FXS 2FXO, NSGate 800 2FXS). In sip.conf they are registered so: [3301] type=friend host=172.222.135.11 username=3301 secret=0000 defaultip=172.222.135.11 dtmfmode=rfc2833 context=it callerid="VoIPGate2Line1" <3301> allow=g723.1 [3302] type=friend host=172.222.135.11 username=3302

Hi all, I have two nodes, connected to a switch, using Tinc 1.1 from git. They connect each other with sptps, and to other nodes in the Internet with old protocol because they have Tinc 1.0. There is no problem with remote nodes, but between my 2 local nodes, they see 1518 PMTU. But local network is 1500 MTU !!! So nodes can ping each other but larger data does not go. test1=sllm1 test2=sllm2

Hi, I am running Samba version 2.2.5 with utmp turned on. I have a problem with utmp and not displaying who is currently logged in. The basic idea is that even though a user has logged off the computer (win2k pro) a connection to IPC$ remains. It gives this. [root@lifesaver root]# smbstatus -u scott Samba version 2.2.5 Service uid gid pid machine

Hi! I'm using: Dovecot 1.0.beta8 OpenBSD 3.9 KMail 1.9.3 My password file contains only one user now. I've changed its password to a dumb one: 'asd' (so this is not a wrong password failure :) I've configured the PLAIN and DIGEST-MD5 mechanisms in dovecot.conf, and I'm only using pop3. Also I've turned on the verbose auth logging, and I'm attaching the logs

Hi eveybody again! I don't want to be annoying, but if nobody can help me with this, I'll have to desist of working with SIP.I have some questions about SIP, as I wrote in another mail. I have a SIP Gateway and I have two phones (an analog one and a DECT one) conected to it.Also, I have two Dlink dg102s with four phones conected to them. The main problems are two. Calls between the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, 2 weks ago I asked questions about PJSIP and T.38 but got no replies. I upgraded Asterisk to git as of yesterday (309dd2a), and I'm still having the same issues. In the trace below, I'm sending a fax from Hylafax server through iaxmodem on Asterisk-13 (tiare) to a second Asterisk (11.18.0 t0gw) connected to the PSTN via ISDN; the

Mandrake 9.1 Samba 3.0, windows2000 pro sp4. I finally got Samba 3.0 working thanks to G?mes G?za. Now I am having another issue as outlined below: 1)There are 2 users on the Linux pc, markw (regular user) and root. Both have valid samba passwords. 2)I have a share called: [data] path = /test valid users = markw, root read only = No browseable = yes 3)I am able to map the share with the user

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

Will this do the intended thing? This is in sip_nat.conf which is included in sip.conf: externip=192.168.0.200 localnet=192.168.0.200/255.255.255.0 externip=64.168.237.110 localnet=192.168.1.2/255.255.255.0 I have Asterisk running on a box with two Ethernet interfaces and bound to both. One interface, 192.168.1.2 services clients outside the firewall who are led to believe that Asterisk is

I'm having trouble setting up tls/srtp secure communications on my Asterisk server- I'm still rather new at working with Asterisk. I have enabled tls and encryption and I have csipsimple with tls build on the phone. I'm currently only testing one phone with this capability so far, and the rest still work in the current state. My logging looks like this with verbose turned up:

This is running in vmware, and I noticed occasionally wmware reports that the cpu is being maxed out by a virtual machine. Logging into the virtual machine and running top confirms that the smbd process is maxing out the cpu. If I leave it alone for a while, eventually it starts dropping connections and not letting people into the file server. Killing the process with kill -9 does no good, it

I have so far been unable to get rsync to work properly in a test setup. Does anyone have any ideas? Both PCs are running RedHat 7.2. The Server: IP Address 192.168.0.202 Server Name: RH72TB hosts.allow ALL: 192.168.0.201 rsyncd.conf: [testmodule] path = /tmp The Client: IP Address 192.168.0.201 hosts file: 192.168.0.202 RH72TB I have run "rsync --daemon" on the server.

Not sure what this is. When I call my own ext the call will ring for 10 sec and goto the voicemail. However the phone will keep ringing and I see this on the asterisk CLI Jul 27 11:17:48 WARNING[3563]: chan_sip.c:8666 handle_response: Host '192.168.0.200' does not implement 'PUBLISH' Have no idea what this is talking about 192.168.0.200 is a cisco 7960G

Hi Guys, Thi sis my first post, sorry for my english, I''m Italian. I desperate try configure home server/router connected over ADSL with dynamic IP. I''ve registered to no-ip and in order to connect externaly to my home server. My system is gentoo based. I''ve just installed different pubblic servers with static IP and shorewall and had no problems, but my own home

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden

I have setup a trunk on Asterisk 11.7 to an Avaya Session Manager. Every time I try to send a call over it, the call gets rejected. Here is the sip debug trace. Could anyone tell me what may be going wrong? nxdasterisk-2*CLI> [Apr 23 08:20:59] WARNING[19047]: pbx_spool.c:309 safe_append: Unable to set utime on /var/spool/asterisk/outgoing/scott.call: Operation not permitted Audio is at 18380

Is there a way to increase the number of retries or the time to help with this? WARNING[40966]: File chan_sip.c, Line 462 (retrans_pkt): Maximum retries exceeded on call 0ea2761d6a82fa49221f547c739bde18@192.168.0.200 for seqno 103 (Request) WARNING[40966]: File chan_sip.c, Line 462 (retrans_pkt): Maximum retries exceeded on call 0ea2761d6a82fa49221f547c739bde18@192.168.0.200 for seqno 103

Hi all, I'm back again with my speed issues. The past issues where dependant of network I used. Now I run my tests in a lab, with 2 configurations linked by a Gigabit switch : node1: Intel Core i5-2400 with Debian 7.2 node2: Intel Core i5-3570 with Debian 7.2 Both have AES and PCLMULQDQ announced in /proc/cpuinfo. I use Tinc 1.1 from Git. When I run an iperf test from node2 (client) to

Hi, Samba team! I am trying to install samba4 on FreeBSD 9.2 as a domain DC to join an existing samba4 domain controller on FreeBSD 9.2. I followed the instruction of: Samba4/HOWTO/Join a domain as a DC Everything is OK until I run the following command: root at mtm:/var/named/etc/namedb # samba-tool drs showrepl Default-First-Site-Name\MTM DSA Options: 0x00000001 DSA object GUID:

Hello, I can't find the information on the wiki :( When is the quota recalculated after a mail deletion ? For instance, I am running low of storage and I use Thunderbird to delete large mail. I only notice a recalculation when I quit Thunderbirdb and I relaunch it. Even, with doveadm CLI, as long as Thunderbird is not disconnected on the client side, the server didn't recalculate the