similar to: DTMF Caller ID w/o polarity inversion

Hi, is there a way to retrieve a VM message pressing some key during the greeting playback? Our scenario is a PBX with analog trunks and no DID. There's a general mailbox and no way to assign a number to voicemail. I've seen these question before in this list, but seen no answer to it... Thanks, Renato

Hi, I need to create a list of coutries in a driop down. I''m aware of a function ''country_options_for_select'' however this jsut seems to output a string of all countires. How can I get this list in a drop down? Thanks scott -- Posted via http://www.ruby-forum.com/.

Can anyone tell me what this message means? Got event 17 (Polarity Reversal)... I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0. It appears that I get this Polarity Reversal each time an inbound call hangs up. This results in another ring, but no one is there. It appears as an unknown caller, but I believe its a phantom. Thanks, Jim [Oct 10 12:47:54] NOTICE[6669]:

I'm testing a TDM400P with FXO module to receive incoming calls from an analogue line and send it to a SIP device. To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity. The problem is that when a call is finished, the TDM400P seems to require about 20 seconds to prepare for the next incoming call. If a new call comes in within 20 seconds after the previous call was

Hi Can TDM400P detect polarity reversal on FXO module? We have C.O. lines that reverse polarity on Answer and release. Thank You This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you

hi: In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my

Hi ! I ma having trouble with my PTSN line. When I call to my asterisk I get this.. -- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17

I would like to know if any body tried to connect gsm gateway with polarity reversal to fxo module at asterisk server ,and if the polarity reversal solve the problem of the answer and hangup supervison on calls .i appreciate any help.Thanks in advance;Wassim _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

Yesterday I was using one of the cheap Radio Shack phone polarity on various phone outlets in my house and ended up plugging it into my IAXY. While the regular phone jacks tested OK, the IAXY tested as being reverse polarity. The tester was plugged directly into the IAXY so there is no chance of this being caused by crossed wires. Is this something that is misconfigured on the IAXY, a hardware

Hi friends, I?m trying to integrate Asterisk with another PBX (Nortel Meridian) I need to switch the polarity of a FXS port (ZAP channel) to inform the other PBX that the channel was released. Does anyone knows the way I can do it? Many thanks in advance. Merry Christmas to the * world ! ! !. Luis -------------- next part -------------- An HTML attachment was scrubbed... URL:

hello i have a very long column of numbers. i want R to make a new column every time the value changes from zero. example for the column: 90.1194354 87.94788274 80.34744843 64.06080347 30.40173724 0 0 0 0 0 16.28664495 23.88707926 29.31596091 48.85993485 13.02931596 0 0 0 7.600434311 20.62975027 29.31596091 32.5732899 for this example i want to get 3 columns. thanks! [[alternative HTML version

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Hello everyone, i use the noveau framebuffer device in kernel version 2.6.37.6. my graphic adapter is a msi 9500gt, connected to a Barco CRT projector. The Barco will only accept RGB signals with a negative sync. Is there a kernel command line parameter to force negative sync polarity? Or is there a user space command to set framebuffer parameters, fbset does'nt work with nouveau frame

Hi, I am interesting how can I use the capabilities of ProSLIC to measure the following PSTN parameters: - Voltage (V) & Polarity (+-); - Current (A); - Frequency (Hz). Are there any ready for use tools? If there aren't ready for use tools how can I do the above measuring? Best Regards, Miroslav Nachev

Hi, the new Grandstream release for the ATAs allows the setting of the FXS impedence, the Onhook Voltage and the Polarity Reversal. Anyone know how these should be set in Germany? -- Best regards Peer Oliver Schmidt

Hello, I have : answeronpolarityswitch=yes on chan_dahdi.conf but it's making all my lines answer on polarity reversal, this causes a problem for PSTN lines, so how can I set these lines to answer immediately (when it rings)? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a problem with polarity reverse on answer I use asterisk 1.4.30 linux kernel version 2.6.27 dahdi version 2.2.1 and analog card is Sangoma a400 with fxo ports this is my config [trunkgroups]

Hello, I''ve done === class HomeController < ApplicationController def index @country = Country.find(:all, :include => "cities") end end === And rhtml is: === <% @country.each do |country| %> <h1><%= country.name %></h1> <% country.cities.each do |city| %> - <%= link_to city.name, :action =>

Hi, I am just about to move out from my parents home and think about how I will phone from now on. In Germany there is a provider (QSC) who offers DSL (1024 down/256 up) with fastpath without volume or time limits. Does anybody know a comercial (or even semi-professional) provider who lets me dial out through H323 (or another protocol) and also offers an number where I can be called from