similar to: RES: Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual

Gonzalo, I have an APA III-4FXO and I tried using your configurations, I received the message below: -- Executing Dial("SIP/2010-edfc", "SIP/2217008@Mediatrix") in new stack Sep 6 16:54:51 WARNING[1192491824]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x814bf0c (len 774) to 192.168.199.5 returned -1: Operation not permitted -- Called 2217008@Mediatrix Sep 6 16:54:54

Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no documentation. Are there default passwords or IP's that I need to know if I do a factory reset? Or better still, would anyone have a User Manual they could send my way? Any help would be appreciated. TIA. Jamie

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

I am attempting to use a Mediatrix 1204 to interface to multizone paging from Asterisk. I have 4 different paging interfaces and want to connect each of those 4 to an FXO port on the Mediatrix. The desired result is to be able to issue some SIP dial string from asterisk, seize the FXO port on the Mediatrix and then have a speech path. I am able to place calls over the Mediatrix when it's

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

Dear Group, I have been able to configure my Asterisk BOX to receive calls from Mediatrix 1204. I'm having problems sending calls out via my Mediatrix unit. The SIP Invite is sent to the Mediatrix but the Mediatrix unit sends back a Status : 480 Temporarily Unavailable. This is my configuration on Asterisk; exten => _78996.,1,Dial(SIP/${EXTEN:5}@192.168.6.52) exten =>

i'm new here and i need help on how where can i get software version 4.0.x of the mediatrix and how can i install it... mediatrix unit im using has a software version of 2.4.9.57. i would like to use H.323 not SIP... please need help asap!... hope to hear from anyone of you soon.. thanks in advance! ------ eder _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain

Anyone had any good/bad/otherwise experience with the Mediatrix 1204 Sip FXO 4-port gateway? The archives tend to suggest the box is not very straight forward, and possibly lacks some basic pstn interaction features. Thinking about trying one in place of a pair of x100p's (functioning fine now). CallerId, etc, supported on this gateway? Rich

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks and Regards Shad Mortazavi

I have successfully implemented 1204 in semi production environment. Just want to share that it works very well, through the firewall (NATed). Unfortunately, it can not register with the server (and authenticate) but otherwise everything is fine. The audio quality is very good. Regards, Wojtek -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! We are located in the UK, and we are planning to replace our old pbx with an asterisk based pbx. For outgoing calls our present pbx is connected to three PSTN lines which all have the same number. Internally, the pbx caters for quite a few extensions, and each extension can make outbound phone calls. Only very rarely does our call volume exceed three simultaneous connections (inside to

I bought a couple of Mediatrix 1204's a few of months back. (Perceived advantages were relatively low overall cost and size per port, and it isn't nearly as vibration sensitive as a PC would be.) Rich Adamson's review from Feb 1 is comprehensive, and the only thing I'd like to add is this: One "feature" of these units that absolutely infuriates me is its behavior for

Hello guys, I need your help related to a mediatrix 1204 configuration. I read some of the messages that you posted in the asterisk users mailing list about the mediatrix 1204 and decided to contact you. I know that the community is not related to Mediatrix devices, but so far I have not found any other group that has work as much as you with them. I bought the mediatrix in Mexico and my provider

Hi all, Please excuse my newbie status I need help in configuring a mediatrix 1204 PSTN gateway with asterisk. Basically each FXO port is configured with a SIP username and automatic transfer extension, which should transfer incoming calls to an asterisk extension. I created extensions corresponding to the FXO port SIP usernames. Port 1 - SIP username - 21383396 - call forward to - 300

Product Review Mediatrix 1204 4-Port SIP FXO Gateway Firmware: v2.4.10.69 - US Version US Retail: ~$750, Street Price: ~$450. The Mediatrix 1204 SIP FXO gateway is equipped with four RJ11 pstn jacks and one RJ45 Ethernet jack on its rear panel. It terminates the four pstn lines in either Loop Start or Ground Start mode, handles incoming CallerID, and generates either Dial Tone (back towards the

We have a Mediatrix 1102 hooked into the network. Both of the attached analog phones and all of their features work, but in the CLI we keep getting "-- Got SIP response 481 "Transaction Does Not Exist" back from XXX.XXX.XXX.XXX " (Where XXX is the IP address of the Mediatrix ) every few minutes. I have changed most of the settings in the sip.conf multiple times and have done

Hi all. I'm evaluating a mediatrix 2fxs 1102. seems great (it has also supervised transfer, that's very needed in office environments and works well). the only I thing I cannot make work is the auth to my asterisk server. If I don't set a password into the mediatrix and *, I can call out, but still the registration goes wrong. using a password, nothing works. I've done some

We just did an upgrade on our Asterisk to the CVS version and our Mediatrix 1102s stopped working correctly. Our Asterisk is connected to the PSTN with a PRI. Calls from the PSTN to the Mediatrix 1102 work fine. The issue is calling out to the PSTN from the 1102. Asterisk looks like it process the call just fine except there is no talk path. Get this, though: If you flash hook and then

I recently purchased a Mediatrix 1124 from an auction of a company that went out of business. It came with nothing other than the unit itself. In digging thru the Mediatrix web site, and various google searches, it looks like it only supports SNMP setup, and only with their software (or the correct MIB). However, Mediatrix doesn't appear to let you download said software or MIB from