Displaying 20 results from an estimated 1000 matches similar to: "Kphone Can't register to ser via Asterisk"
2005 Feb 07
0
kphone and *
I'm having trouble with kphone on our system.
It's using ulaw on an internal network. No NAT.
I had it working fine with very similar hardware (an old Dell Optiplex GX1)
running as an LTSP terminal.
But then I put the same sound card in an Optiplex G1. Kphone will answer the
line fine when I call it (call coming from the * machine), but when we try to
get kphone to dial, each GUI
2004 Sep 30
2
OT: Kphone installation problem
Hello,
I know that my Kphone question may be a bit off topic, but I have been
busy with this again and again for about one month now, sent three
mails to kphone@wirlab.net (the contact address mentioned on
http://www.wirlab.net/kphone/index.html), asked for a solution in a
german ip phone forum and tryed many things by myself.
I try to compile KPhone 4.0.3 (tryed CVS Version as well) but
2005 May 09
1
Kphone-->asterisk<--Kphone
hello,
I am running asterisk on one linux PC and want to talk through this server using Kphone installed on 2 different PC's. These are the extra lines added to sip.conf and extensions.conf respectively.
sip.conf
[jitha]
type=friend
host=dynamic
secret=jitha
context=sip
dtmfmode=inband
[sudhananda]
type=friend
host=dynamic
secret=sudhananda
context=sip
extensions.conf
[sip]
2004 Dec 07
1
asterisk and kphone (sip soft phone for linux) on same machine
Hi, i just installed latest asterisk on fedora rc2 and on the same
machine i installed a sip soft phone called kphone. Kphone complains
about /dev/dsp being used and can't place/answer calls (/dev/dsp is
obviously used by asterisk) . how can "share" my sound card with these
two programs?
or
can i disable the sound card in asterisk so i can use kphone to
place/answer calls?
BTW kphone
2005 Jul 21
0
kphone & Asterisk CVS HEAD: no audio
Dear Asterisk experts,
I've just downloaded Asterisk CVS version (since I'd like to manage
its configuration from RealTime).
Next, I have kphone on the same Linux host, and VmWare virtual
machine with Windows and X-Lite IP phone inside.
I successfully tested the demo's with X-Lite, but failed to hear
something with kphone (v4.1.1). There were NO problem with this
kphone and stable
2004 May 25
1
Troubles with Kphone]
-------- Original Message --------
Subject: Re: [Asterisk-Users] Troubles with Kphone
Date: Tue, 25 May 2004 15:44:15 +0530
From: Murali Krishnan <murali@bksys.co.in>
Reply-To: ismk@myrealbox.com
Organization: bk SYSTEMS (P) LTD.,
To: asterisk-users@lists.digium.com
References: <200405250652.46370.klky3@fibertel.com.ar>
enano wrote:
>Hi ,
>
>
>
>I'm triying to use
2004 May 25
1
Troubles with Kphone
Hi ,
I'm triying to use kphone 4.02, but when i'm make a call the programs
doesn't respond any command, so i can't hear any sound ..
in sip.conf that's my codec config:
disallow=all
allow=gsm
allow=ulaw
allow=ilbc
and the kphone give the follow :
SipClient: Sending: 06:46:28.116
--------------------------------
ACK
2005 Feb 17
1
(Kphone) Registration Failed: Forbidden
I just can't get kphone to register with asterisk, i can make calls to
the demos and even get into the mailbox but kphone cannot register.
Here's my story. Can you help me?? Please
I have installed asterisk on debian using apt-get install asterisk.
I have configured an extension in extensions.conf as follows
exten => 8003,1,Dial(Sip/8003,${RINGTIME},rt)
exten =>
2005 Jun 01
0
newbie with kphone and asterisk
hello all,
i have already configure sip.conf and dialplan.
i done the follow me script.
first problem:
i want to call(with kphone) someone at my extension, i
must dial the extension number.
i can't dial their username.
20531603@192.168.8.125 (work)
mustafa@192.168.8.125 (call fail)
is it possible to do that??
second problem:
if i want to call another number (not my
2003 May 16
1
kphone fails to register with asterisk (sip)
hi all
when starting kphone, it tries to register with asterisk but fails after a
while. The SIP entry in * for this user is below. This is identical to the
other SIP entries. The other SIP clients are MSN messenger plus one snom.
these work fine. See SIP debug output attached as 'screen-exchange'
thanks
roy
[roy]
type=friend
;insecure=yes
username=roy
;secret=password
host=dynamic
2003 Jun 26
0
Kphone not working with Asterisk?
I'm trying to get two linux machines with kphone-3.11 two communicate with
each other over asterisk. I have them configured correctly on asterisk to use
sip channels, but when I call from one phone to the other I don't any voice
communication between the phones. According to the phones I'm connected, but
according to asterisk, I get the following message:
-- Executing
2004 Aug 24
0
Trouble with all linux sip softphones.... And asterisk/linphone/kphone SRPMs
Hi, I've been messing with getting SIP working for days now, with
limited success. I've got Asterisk set up on a remote server with the
echo test. Please try it out to verify I've got the server working
right:
sip:robot@nixon.butchwax.com
Running FC1, ThinkPad T22, headset thru the soundcard. Asterisk is
asterisk-1.0_RC1. No NAT. The phones I've tried so far are as
2004 Sep 10
1
(Resend) Trouble with all linux sip softphones.... And asterisk/linphone/kphone SRPMs
Got no responses to this, but the list seemed to be down for a while, so
here it is again. Sorry for the extra bandwidth!
John
Hi, I've been messing with getting SIP working for days now, with
limited success. I've got Asterisk set up on a remote server with the
echo test. Please try it out to verify I've got the server working
right:
sip:robot at nixon.butchwax.com
2005 Feb 14
6
Linphone / Kphone
Hi,
I have * working with X-Lite and Sipura adapters, but I have one person
who is linux based, and is trying to use Linphone and Kphone. His end
works, but I get very bad echo on my end. Have any of you folks been
able to get linux based soft phones working well with *?
I'd appreciate links to howtos/docs if you have them, and/or samples of
working configs for * and the linux
2003 Jun 24
1
Working Clients for Linux?
All the clients that I'm aware of for IP telephony have drawbacks. Some
won't work at all.
KPHONE -- Kphone works best for me, but Kphone doesn't have a dialpad to
dial tones during the middle of the call, so the demo that * comes with
can't be run. Kphone (3.1, the latest) also has a habit of crashing if
you do something even mildly stressful, such as hang up while Kphone is
2004 Apr 06
1
SIP phone registering problem
I am clearly doing something ridiculously wrong.
Running Asterisk 0.7.2 on FreeBSD 5.1, I have SIP soft phones which are
unable to register. They keep trying and then time out.
With the sip debug on in Asterisk nothing is logged.
Here is the trace from one of the phones (kphone):
(192.168.100.13 is kphone, 192.168.100.3 is Asterisk)
sipclient: sending: 21:47:45.454
2003 Oct 31
0
Flaky SIP registration
Hey all,
Has anyone ever had problems with flaky behaviour when registering
softphones dynamically with asterisk? I'm working with Kphone and
having problems getting consistent results with registration.
When Kphone is able to register, asterisk reports
-- registered SIP '2001' at XXX.XXX.XXX.XXX port 5060
where asterisk sees [2001] in sip.conf as
[2001]
2005 Mar 06
2
Trying to get 2 SIP phones to work
Im new to Astererisk. I compiled the latest CVS and setup the server. It
looks like things are working. I'm running kphone, x-lite and sjphone to
test things out. The kphone (local to the asterisk server) can call and
receive calls from any of the 2 windows machines. The first windows phone
I start I can send/receve calls the second one I cannot. I. No matter
which one I start first only
2003 Apr 16
4
iLBC
i tried asterisk ilbc codec against kphone. when the call got
connected, i started to immediately get these kind of message to the
console:
WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of 52 bytes long from RTP (50)?
WARNING[14350]: File codec_ilbc.c, Line 141 (ilbctolin_framein): Huh? An ilbc frame that isn't a multiple of
2005 May 17
1
sip show registry empty ?!?!!?
Hi all,
i've installed Asterisk with AMP. I've created 4 extensions (for 4 SIP phones)
and this is what my "sip show users" return:
moloch*CLI> sip show users
Username Secret Accountcode Def.Context ACL NAT
204 moira from-internal No No
203 michele from-internal No