similar to: Help debugging voicemail problem

Hi, I am using a voicetronix OpenLine4. I downloaded a recent asterisk CVS from voicetronix webpage but have had no luck to reduce echo on outgoing calls and for it not to crach on incoming calls. I dont think both problems are related though. Here is an output of what happens when a new call comes in and my voicetronix tries to pick it up and crashes asterisk: > vpb/1-1: Event

Hi we've got Asterisk CVS-HEAD 18-Aug-04 (modified by Voicetronix as available on their site for use with the vpb driver) and an OpenLine4 (4xFXO). The same server also has two X100P. Calls on the Voicetronix card drop instantly when the called party picks up. The vpb driver reports that it detected a hangup (loop drop) yet there is no hangup when connecting the X100Ps or analog phones to

I am a serious Asterisk newbie: just installed asterisk last week and it is now running with our Voicetronix OpenLine4 hardware. All is working as expected with one exception, in the following sequence (extracted from my extensions.conf file): [GetConfirmation] exten => s,n,SetVar(TimeOut=0) ; if timeout and TimeOut=1 then user already timed out once, so hangup exten =>

I am trying to set up a simple Asterisk server. All it's going to do for now is to act as my voicemail box. I've got a DID from Voicepulse, and am using IAX (I'll get to SIP someday when I want to circumvent the phone company for long-distance, but for now I'd be happy to get a trial version of Asterisk running). So far, I've managed to set up voicemail.conf, extensions.conf

Hello all, I've installed AAH 1.1 on my VIA C3 powered mini PC. I've made the necessary changes to the * makefile, so the compilation went well. The first thing I did was configuring two extensions from AMP, namely 200 and 201. Then I installed X-lite on two PC's and configured them with one of the extensions: System settings - SIP proxy - Default: Username: 200 Authorisation user:

I have 2 problems with openswitch12: 1) I can not make work "ignorepat => 9" i do not get dialtone after the number is dialed, the system ignore the number and i can go on dialing the rest of the number.... but when i want to take the line teh dialtone do not stay. 2) when i tray to leave a message on the voicemail of an user i get the following error Sep 3 17:04:55

Hello, I have setup a test server with asterisk/AMP and have several 7960's connected to it. The asterisk server has a public ip and all the 7960's are behind nat'd routers. When I try to call from extension to extension I get directed straight to voicemail. I do not have any cards installed and instead direct everything to an Ondo server. I have been told it's not an AMP

I'm running the a very recent CVS version of asterisk on an RH9 machine. My problem is that my x100p takes about 10 seconds to detect a hangup. After that it takes about 10 more seconds for the the zaptel device to release the line. Here's an example of my console report: == Parsing '/var/spool/asterisk/voicemail/default/101/INBOX/msg0000.txt': == Parsing

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event [12=>[11] Tone detect:GRUNT event [2=>[11] Dial

I have installed a 6VPCI card from voicetronix's but i can't get astersik to use it! Now looking at the loaded modules the chan_vpb is not loaded- so I assume that is why it is not working. Now I modified my vpb.conf file and extensions.conf, have I missed something Has anyone a installation guide as I am very new to this!! I have had asterisk working with SIP extensions. by dowloading

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i ignore some setting for VoiceTronix OpenSwitch12

I have tried sjphone - worked well, although I think my 3 year old IPAQ had a bit of a hard time keeping up with the pace as there was quite a delay in the speech. Probably says more about my ancient IPAQ than SJPhone. Sam Lex Lethol <lethol@gmail.com> wrote on 23/09/2004 15:31:39: > I tried the xten one and didn;t like at all.. > > Havent tried to SJPhone, but my guess is

I have a user, running CVS a/o 11/23/03, who has complained about "phantom" messages showing up days or even weeks after she has deleted them. So I asked her to let me know when it happened again, and she called a few minutes ago. The directory listing below shows a listing of the /var/spool/asterisk/voicemail/default/XXXX/Old directory, and to my surprise the messages are indeed

Hello all, We had an experimental system which works on OpenLine4 telephony card and Asterisk 1.0.9. Customer asked to upgrade Asterisk to 1.4, then we found our problem: At first Asterisk 1.4 does not compile chan_vpb.so. The problem is it tries to compile chan_vpb.cpp to chan_vpb.o and chan_vpb.oo, then try to link them together. I manually compiled it, then make went smoothly. But it

Hi, I'm having trouble getting asterisk to report MWI to a Cisco CCME. I record a message in mailbox 29, but the subsequent MWI notifications I see continue to report no messages waiting. Are they reporting for the wrong mailbox? Is there some other option I have to set or change? I'm running asterisk-1.4.22 Since the mailbox is in [home] in voicemail.conf, I've tried things like

So I've got a Voicetronix card and it looks like the kernel driver works. Other than the 0's for ID info. vpb: Driver Version = 4.0 vpb: major = 251 vpb: tmp [0xfc8fec00] dev->res3 [0xfc8fec00] vpb: tmp [0xfc8c0000] dev->res2 [0xfc8c0000] vpb: 1WS Write cycle vpb: Manufactured 00/00/0000 vpb: Card version 00.00 vpb: Serial number 00000000 vpb: Setting up udev... vpb:1 V4PCI's

Does anyone have a quick and dirty script for defragmenting mailboxes? i.e.: -rwx------ 1 root root 80553 Oct 20 16:27 msg0000.gsm -rw-r--r-- 1 root root 218 Oct 20 16:27 msg0000.txt -rwx------ 1 root root 781164 Oct 20 16:27 msg0000.wav -rwx------ 1 root root 79360 Oct 20 16:27 msg0000.WAV -rwx------ 1 root root 7260 Oct

Good day all I had a look at the extensions.conf sorting http://www.voip-info.org/wiki-Asterisk+config+extensions.conf+sorting What I'm trying to do is route all my cellphone number threw a channel and all other calls threw the other 3 channels Cellphone numbers are 10 number,i.o.w XXXXXXXXXX. This is what I tried but it doesn't seem to work,please help Thanks Altus extensions.conf

Hi list, anyone know what is going on here? I don't get any sound from the out clip & I get the following when I dial in to asterisk (after which it just times out): -- Event [0=>[06] Ring] on vpb/1-7 -- Executing Wait("vpb/1-7", "2") in new stack Read_channel ## vpb/1-7: Setting record mode, bridge = 0 -- Executing Answer("vpb/1-7",

Hi list, I am having some difficulty implementing a certain dialplan where the following happens. If the first Dial() is not answered, I want to play a small greeting then ask the caller to either hold the line (try calling again) or press 1 to leave voicemail. exten => s,1,Dial(${BLAH},10,Tt) ; Dial 10 sec exten => s,2,Answer exten => s,3,Playback(greeting)