similar to: No audio on PRI channel answered by Playback() or MeetMe()

>-----Original Message----- >From: Larry Shields [mailto:LJ.Shields@Verizon.net] >Sent: Friday, August 27, 2004 12:20 PM >To: asterisk-users@lists.digium.com >Subject: [Asterisk-Users] No audio on PRI channel answered by Playback() orMeetMe() >If I assign the DID to ring extension SIP/2000 and then after time-out send >it to MeetMe() or Playback() it works and the caller

I posted a problem earlier thinking it was due to a lack of sound card. Several members stated that you do not need a sound card to play audio to a PRI channel. I did some further testing and discovered that there is a problem with call progress tones or signaling on my PRI. I think that the reason I am not hearing audio from the MeetMe() or Playback() apps. is because the the calling side of

Hi, How can I make calls from Asterisk client to NEC NEAX 2400 traditional phone ? Is it possible to have a connection between Asterisk and NEC NEAX 2400, since NEC-NEAX2400 is an IP-PBX and supports SIP. Please help me to find a solution ;;; Thanks & Regards Ram Kumar Customer Support Engineer Barcode Gulf LLC Dubai , UAE Mobile : + 971 50 5594178 Email : Ramkumar@barcodegulf.net

With 1.6.1, I'm trying to set up a test of meetme for creating dynamic conferences. cat meetme.conf [rooms] conf => 600 extensions.conf: [meetme] exten => 2663,1,MeetMe(,D) exten => 2663,n,Hangup() exten => 2666,1,MeetMe() exten => 2666,n,Hangup() What I'm expecting is to dial 2663, get a conference room number ( 600, I suppose since it's the only room ), and set

Is this me or what? -- Playing 'demo-congrats' -- Executing MeetMe("H323:996", "") in new stack -- Playing 'conf-getconfno' == Parsing '/etc/asterisk/meetme.conf': Found WARNING[17425]: File app_meetme.c, Line 151 (build_conf): Unable to open pseudo channel -- Playing 'conf-invalid' -- Playing 'conf-getconfno'

Upon setting up and configuring the my extension.conf, meetme.conf and following the instruction outlined at this web page: http://www.voip-info.org/wiki-Asterisk+timer+ztdummy I get the following errors when calling the meetme number. Executing Wait("SIP/216.53.118.2-f41196e0", "1") in new stack -- Executing MeetMe("SIP/216.53.118.2-f41196e0",

Is there anyone out there who has tried to connect up an asterisk box to make and take calls through a NEC NEAX 2400 using Q.sig or anything like it? Can anyone tell me if it is possible? Thanks in advance, Phil Allred Brooklyn Law School

as my first project with *, i would like to replace our old neax2400(sds) with an * server. i've got an X100p and a TDM400 on hand already. for the CO lines, the X100p works ok with fxsks signaling though there are still strange things happening every now and again but more testing is on the way. my real big problem is the DID lines which our telcos call DDI lines; (incoming calls only) i

Topology: PSTN<-T1 PRI->NEAX2400<-T1 PRI->Cisco 3825<-Ethernet-> Asterisk VoIP server When I make a call to a VoIP user from the PSTN, the call gets routed through the PBX, and Cisco. Because of that the DTMF tones are passed inband, which I can hear on the VoIP end of the call. However, I have one extension on asterisk set up so that I can check voice mail when away from my

Hey Guy! I have following dialplan for meetme and i want if someone type wrong meetme extension it should say invalid extension. But look like following doesn't work. its just hangup if i type wrong number. how to fix this code.. ;Conference rooms/lines: exten => 7580,1,Goto(ivr-meetme,s,1) [ivr-meetme] include => meetme exten => s,1,Answer() exten => s,n,Wait(1) exten =>

I have ztdummy installed: Module Size Used by ztdummy 3464 0 zaptel 218756 1 ztdummy crc_ccitt 2176 1 zaptel ohci_hcd 16388 0 floppy 49028 0 pcspkr 2180 0 piix 8580 0 [permanent] ehci_hcd 24456 0 uhci_hcd 26256 0 rtc

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have:

When I call meetme: exten => 1000,1,Answer exten => 1000,n,Meetme(|||d) Asterisk is complaing with: -- Executing Answer("IAX2/xxx.yyy.142.204:4569-2", "") in new stack -- Executing MeetMe("IAX2/xxx.yyy.142.204:4569-2", "|||d") in new stack -- Playing 'conf-getconfno' (language 'en') Warning, flexible rate not

All, Thank you in advance for any help. I have a customer in need of a conferencing system. A requirement is for users to each have their own PIN for the same bridge. So, I put the list of users, PINs bridges into a MYSQL DB and used an ODBC connector to parse the table. Asterisk is connected and reads the rows as expected. The problem is that if a user enters a PIN that is NOT in the table,

Hi, I have asterisk installed in the xen virtual server. I installed zaptel 1.4.2.1 and patched it to have ztxen module. I loaded ztxen module but when I try to invoke or call to my meetme application I get the following warning and negative result of connecting to conference: [Feb 5 17:46:13] WARNING[10725]: app_meetme.c:772 build_conf: Unable to open pseudo device [Feb 5 17:46:13] --

I was searching for help on how to handle the errors that are returned from the MeetMe application. for instance. 1) if a user tries to join a conference that is locked, allison says that the conference is locked and then comes back to the dialplan, however it does not continue down the dialplan. I have a meetme command on Priority 8, and the CLI says that it returned non zero (as the wiki

Hi, In our office, we're slowly migrating from a cisco call manager set up to asterisk. Problem is management doesn't want to buy any other hardware ?as they had already invested a lot in cisco. The main cause of this is asterisk's added features like unique FAX number for everyone in the company (which will be the same as phone DID), Voice mail, Auto Answer etc yet we need thousands

Hello, So much keeps changing with the dialplan and Realtime lookups. Just downloaded the latest stable 1.6.1.2. The app_realtime, which was perfectly brilliant and did exactly what I needed, is gone; replaced with func_realtime. The REALTIME function is unacceptable: ; Get the conference number from the user exten => s,n(readconfno),Read(USER_CONFNO,conf-getconfno,0,3,20) ; See if

I raised an issue with Sipgate because my Asterisk 1.6 plain refuses to recognize digits pressed on a keypad coming in from a Sipgate trunk. There answer was to set this: dtmfmode=rfc2833 in the general section of sip.conf This has made no difference. I've tried a range of settings (auto, rfc2833,info) but no matter what, it plain refuses to pick up key presses. Locally, if I call from an

Hello Users, Good Morning, I'm doing on Conference Bridge with Asterisk + OpenSER with CBMySql modules. And I'm not Using the Zapptel Cards. 9001 ----------> dial 19001(conference Users)-------openSER ---------> Asterisk ------------------------------------------------------------------------ *In Extension.conf * [from-sip] exten =>