similar to: 7960 Looses DHCP Lease when 7920 boots!?

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

I have been trying to solve a problem wherby when I boot a cisco 7920 my 7940 seeks a new IP and the dhcpd log shows it released its existing IP. In searching for the solution I notice there were 2 messages on this list in Aug & Sep 2004 which raised the problem, but I could not find any answer was posted. Has anyone solved this please? Thanks, Mark.

Cisco no longer offers a zip file with the firmware in it, only an EXE file. If you use Winrar, you can unzip the exe. Pull out the following files and drop them somewhere: data1.hdr data1.cab data2.cab Download i6comp. If you search on google, it's all over the place. From the command line, run: i6comp e -r data1.cab This reassembles the CAB's and unpacks all of the files out of

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

What have people found to be the ideal setup for recording asterisk prompts? I'm looking for both the ideal application to record them in, the ideal format, as well as hardware (do I need a fancy studio mic or will a headset mic work?). Thanks, Justin

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

John Todd wrote.... > Cisco has an 802.11 phone called the 7920, which is apparently > shipping now. It is very expensive (>$550 USD) and only runs SCCP at > the moment, which is Cisco's proprietary VoIP protocol. However, if > it falls in line with some of Cisco's other high-end VoIP equipment, > that means it should have a trailing-edge SIP image running by

Does anyone know if there is a Smartnet contract or whatnot available from Cisco for access to the latest 7920 images? I've got one w/ asterisk that is exhibiting a few of the documented bugs running 1.0.3 (1.0.7 is the latest IIRC). Thanks! -- /* Ian A. Underwood - agentgrn@dcne.net - http://www.agentgreen.org There are 4 boxes to use in the defense of liberty: soap, ballot,

I know this isn't the "Cisco list", but enough people here are wired into the VoIP world that perhaps someone has heard if Cisco has released a SIP image for the 7920 yet... JT

I?ve read various stories about the Asterisk SCCP implementation. Some say it works fine, others say it doesn?t ? stick with a SIP phone! My dilemma is that I?d like a WI-FI phone with multi-line capability, and so far Ciscos 7920 is the only one I?ve found. The disadvantage is that it cannot be upgraded to support the SIP-protocol, so if I purchase such a phone I am stuck with the SCCP.

I am trying to register cisco 7920 to asterisk using sccp since to sip firmware upgrade to it ,but its ends with failed registration.Can you please send me a sample for sccp.conf configuring cisco 7902. Thanks -- SCCP: Accepted connection from 192.168.5.163 -- SCCP: Using ip 192.168.5.228 -- SCCP: Accepted connection from 192.168.5.163 -- SCCP: Using ip 192.168.5.228

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours

This is Off-Topic for Asterisk, but I wanted to get some feedback on headsets for Cisco 7940/7960 phones. We have about 10-20 people who wants/needs a headset for their phone & was hoping to collect some real-world input. Thanks!!

Hi, I have an odd problem where when a call is made to any landline phone the callerid number shows up on the caller id device with no problems. However when I call a cell phone from Sprint or Verizon it always shows up as unavaliable. I've tried multiple cell phones from each carrier. Though today I called a t-mobile phone and the callerid came through fine. Is this an * level problem

Hi, I'm trying to setup Asterisk to allow users to dial out to the PSTN using a remote box supporting h.323. I'm using chan_h323.so, and I'm able to make outbound calls to a client like netmeeting with a line like this: exten => 242,1,Dial(h323/xxx.xxx.xxx.xxx) And I'm able to receive incoming calls to asterisk. However I'm not sure how to route calls to the remote h.323

Hi Jan, >the last 2 days i was working on getting the 7920 Phones to work with >Skinny & Asterisk; however no luck (yet). Same here, no joy so far. >Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for >me ? it should be documented at the cisco page, but it isn't :-( The default file should only get requested when the specific file wasn't found.

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the