similar to: Trouble with all linux sip softphones.... And asterisk/linphone/kphone SRPMs

Got no responses to this, but the list seemed to be down for a while, so here it is again. Sorry for the extra bandwidth! John Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot at nixon.butchwax.com

Hi, I have * working with X-Lite and Sipura adapters, but I have one person who is linux based, and is trying to use Linphone and Kphone. His end works, but I get very bad echo on my end. Have any of you folks been able to get linux based soft phones working well with *? I'd appreciate links to howtos/docs if you have them, and/or samples of working configs for * and the linux

Minor fix. I'm using this in my RPM specfile. John --- ./zaptel-1.0-RC1/Makefile.bigu 2004-07-16 17:09:07.000000000 -0500 +++ ./zaptel-1.0-RC1/Makefile 2004-08-18 16:28:45.000000000 -0500 @@@ -316,10 +318,10 @@ elif [ -d $(INSTALL_PREFIX)/etc/init.d ]; then \ install -m 755 zaptel.init $(INSTALL_PREFIX)/etc/init.d/zaptel;\ \ fi - if [ !

hello, I am running asterisk on one linux PC and want to talk through this server using Kphone installed on 2 different PC's. These are the extra lines added to sip.conf and extensions.conf respectively. sip.conf [jitha] type=friend host=dynamic secret=jitha context=sip dtmfmode=inband [sudhananda] type=friend host=dynamic secret=sudhananda context=sip extensions.conf [sip]

Hi , I'm triying to use kphone 4.02, but when i'm make a call the programs doesn't respond any command, so i can't hear any sound .. in sip.conf that's my codec config: disallow=all allow=gsm allow=ulaw allow=ilbc and the kphone give the follow : SipClient: Sending: 06:46:28.116 -------------------------------- ACK

I'm having trouble with kphone on our system. It's using ulaw on an internal network. No NAT. I had it working fine with very similar hardware (an old Dell Optiplex GX1) running as an LTSP terminal. But then I put the same sound card in an Optiplex G1. Kphone will answer the line fine when I call it (call coming from the * machine), but when we try to get kphone to dial, each GUI

Hi, i just installed latest asterisk on fedora rc2 and on the same machine i installed a sip soft phone called kphone. Kphone complains about /dev/dsp being used and can't place/answer calls (/dev/dsp is obviously used by asterisk) . how can "share" my sound card with these two programs? or can i disable the sound card in asterisk so i can use kphone to place/answer calls? BTW kphone

> I'm about to try to integrate SPEEX into the VOCAL project. Good. Just a detail, but the correct spelling in "Speex". > 1) To encode, it appears I need an array of floats. If > I am playing wav files, what is the best way to turn these > into something speex can encode? Speex version 1.0.x (stable) expects float's in the -32768 to +32767 range, so it's just

I just can't get kphone to register with asterisk, i can make calls to the demos and even get into the mailbox but kphone cannot register. Here's my story. Can you help me?? Please I have installed asterisk on debian using apt-get install asterisk. I have configured an extension in extensions.conf as follows exten => 8003,1,Dial(Sip/8003,${RINGTIME},rt) exten =>

Hi, I am new to Asterisk and SIP. I have just installed ser as sip server and asterisk ser is in 192.168.6.244, without authentication kphone as sip client in 192.168.6.254 asterisk is in 192.168.6.100 and did not install hardward on my pc in sip.conf , i add following lines ... register:jimmy@192.168.6.244/1000 ... [192.168.6.244] type=friends host=192.168.6.100 fromuser=jimmy

hello all, i have already configure sip.conf and dialplan. i done the follow me script. first problem: i want to call(with kphone) someone at my extension, i must dial the extension number. i can't dial their username. 20531603@192.168.8.125 (work) mustafa@192.168.8.125 (call fail) is it possible to do that?? second problem: if i want to call another number (not my

-------- Original Message -------- Subject: Re: [Asterisk-Users] Troubles with Kphone Date: Tue, 25 May 2004 15:44:15 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com References: <200405250652.46370.klky3@fibertel.com.ar> enano wrote: >Hi , > > > >I'm triying to use

Hello, I know that my Kphone question may be a bit off topic, but I have been busy with this again and again for about one month now, sent three mails to kphone@wirlab.net (the contact address mentioned on http://www.wirlab.net/kphone/index.html), asked for a solution in a german ip phone forum and tryed many things by myself. I try to compile KPhone 4.0.3 (tryed CVS Version as well) but

I'm trying to get two linux machines with kphone-3.11 two communicate with each other over asterisk. I have them configured correctly on asterisk to use sip channels, but when I call from one phone to the other I don't any voice communication between the phones. According to the phones I'm connected, but according to asterisk, I get the following message: -- Executing

Dear Asterisk experts, I've just downloaded Asterisk CVS version (since I'd like to manage its configuration from RealTime). Next, I have kphone on the same Linux host, and VmWare virtual machine with Windows and X-Lite IP phone inside. I successfully tested the demo's with X-Lite, but failed to hear something with kphone (v4.1.1). There were NO problem with this kphone and stable

hi all when starting kphone, it tries to register with asterisk but fails after a while. The SIP entry in * for this user is below. This is identical to the other SIP entries. The other SIP clients are MSN messenger plus one snom. these work fine. See SIP debug output attached as 'screen-exchange' thanks roy [roy] type=friend ;insecure=yes username=roy ;secret=password host=dynamic

Today's "frustrated programmer" award goes to Linphone, which has the following debug output: > (linphone:28655): LinphoneCore-WARNING **: this fucking remote sip phone did not answered properly to my sdp offer! I get this message when I connect to linphone using a softphone, or when I try to use linphone to connect to asterisk and listen to an announcement. I suspect that

DOes anyone have any good suggestions as to good SIP or IAX clients for linux? I have set up and am currently testing asterisk in a controlled environment. I have gnophone running on one of my boxes but the gnophone site has been down. So I can't seem to fing the IAX and Ix-devel rpms or the gsm and gsm-devel rpms. So that prevents me from setting up gnophone on another box. I am

Hi, We have set up our Asterisk server, our extension.conf and sip.conf according to http://www.onlamp.com/pub/a/onlamp/2003/07/03/asterisk.html?page=4 It's quite basic, and extension.conf is set up properly. The difficulty we are now encountering is in sip.conf, in trying to get any softphone to register at our own Asterisk server. We have searched the mailing list, and find bits and

Mapping stable-security to proposed-updates. Accepted: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Format: 1.8 Date: Wed, 05 Mar 2015 13:36:37 +0200 Source: xen Binary: xen-docs-4.1 libxen-4.1 libxenstore3.0 libxen-dev xenstore-utils libxen-ocaml libxen-ocaml-dev xen-utils-common xen-utils-4.1 xen-hypervisor-4.1-amd64 xen-system-amd64 xen-hypervisor-4.1-i386 xen-system-i386 Architecture: