similar to: 2 servers

I'm trying to get two * boxes to talk.... no matter what variation I try I get No Authority Found and connection refused from 192.168.1.5 I've googled, I've site searched.... to no avail. Here is the server a configs (192.168.1.5): iax.conf [general] port=5036 bandwidth=low disallow=all allow=gsm jitterbuffer=yes tos=lowdelay register => pbx:test@192.168.2.2 [pbx] type=peer

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right

Hello all, I am trying to connect to my remote MS SQL server from Ubuntu. I have followed HowtoConnectToMicrosoftSQLServerFromRailsOnLinux<http://http://wiki.rubyonrails.org/rails/pages/HowtoConnectToMicrosoftSQLServerFromRailsOnLinux>as best that I can. TSQL is working, example below. My configs are found below. When I run isql : > isql -v pubs name password [IM002][unixODBC][Driver

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Hi! I have a 3d array: > dim(ib5km15.dbc) [1] 190 241 19 and a set of positions to extract: > ib5km.lincol.random[1:3,] [,1] [,2] [1,] 78 70 [2,] 29 213 [3,] 180 22 Geting the values of a 2D array for that set of positions would be: > ima <- ib5km15.dbc[,,1] > ima[ib5km.lincol.random[1:10,]] but don't find the way for the case of the 3D array: >

I think I must be missing something obvious, but I'm having trouble getting a data transformation to work on groupings of data within a data frame (csss3) as defined by 2 factors (population, locid). The data are sorted by year within locid within population and I want to lag another variable (dbc), i.e, shift them down by 1 row replacing the first row with NA, within groups defined by

Hey, guys I've been working on whether libvirt supports encrypted snapshots,Here are my versions of libvirt and qemu [root@xx ~]# libvirtd -V libvirtd (libvirt) 4.5.0 [root@xx ~]# qemu-img -V qemu-img version 2.12.0 (qemu-kvm-ev-2.12.0-33.1.el7_7.4) Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers 1. assign $MYSECRET to libvirt secret using the secret-define and

Ok so I see the problem that I'm having creating a new variable (LAG1DBC) in the example data transformation below is that tapply() is creating a list that is not dimensionally consistent with the data frame (data). So how do I go from the list output of tapply() to create a dimensionally consistent vector that can create the new variable in my original data frame? I've been trying

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

Kevin Larsen <kevin.larsen at pioneerballoon.com> schrieb: > The phone you gave your wife is really old. Are you sure it supports SIP > OPTIONS? Can you make a call in or out to it? If you can, it is more > likely that it just doesn't support that and you can't use a qualify > statement. No, I'm not sure. And no, I can't make any call, right now... At least,

I have three Sipura 3000 FXO untis for incoming PSTN lines on a small pbx. There is an IVR to select the extension. The DTMF tones are not being sensed so the IVR does not work and incoming calls are not being answered. I have listed my sip.conf entries. Is there any solution to this? ;Sipura units [101] type=friend host=dynamic context=default secret=mysecret mailbox=101 dtmfmode=inband

I have a couple of 64-Bit Xeon's with CentOS 4.2 x86_64 installed on them. They don't all have the same motherboards. I've having a difficult time getting CentOS 4.2 x86_64 to boot on some of them in SMP mode (UP works fine). After the installation of CD, it boots up but kernel panics with the following error: Badness in i8042_panic_blink at drivers/input/serio/i8042.c:992 This is

I have three questions about my 7960 phone that I can't discern from the docs/wiki. 1st - If I change the SIPxxxxxx.cnf file to change registrations it sets up new lines as expected. If I delete a line it doesn't get removed when I reboot the phone. I have to go to the phone, unlock it, and reset the SIP parameters. How do I make it "forget" what it has programmed and

Hi all I have a small issue I ma trying to solve (at least to understand..) I am testing an app on my remote_server (w Apache/Passenger) in a sub_URI, without any problem (I tested also the same app, locally w Apache too) in my environment.rb , I have initialized config.action_controller.relative_url_root = "/my_subURI" config.action_controller.asset_host =

I set up ssh without authentication on both servers and I have tested it fine. When I do this: #/usr/local/bin/rsync --rsh /usr/local/bin/ssh --rsync-path /usr/local/bin/rsync remote_server::test /home/test rsync: unable to open configuration file "rsyncd.conf": No such file or directory rsync error: syntax or usage error (code 1) at clientserver.c(502) rsync: connection unexpectedly

Hi, I'm trying to configure 2 parallel sip trunks between 2 boxes. However I seem to have the problem that when making a call from Box 2 to Box 1, it sometimes says authentication failed because it is using the username of the other trunk. Here's my configuration: Box 1: [dp-dp2] type=peer username=dp-dp2 secret=mysecret qualify=yes host=box.2.ip.address context=from-internal [e911-dp2]

Hi list! Finally I got my Asterisk works with my two phones... It was a problem on my Firewall (for the phone of my wife) and on my Dialplan (for forwarding calls). Now all works as expected, at least in the simulation I did with AsteriskNOW. Hopefully it will work later, when Deutsche Telekom changes my ISDN to VoIP... Well, now I have some time to spend with "fooling"... My phone

Hello, Did anyone succeeded in installing Asterisk on OpenWRT system. pls help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090724/aee7ee12/attachment.htm

Hello list, I keep on getting the error : ERROR[1707] cdr_addon_mysql.c: Cannot connect to database server 127.0.0.1: (1045) Access denied for user 'asteriskcdr'@'localhost' (using password: YES) I have a 'cdr' table in my MySQL-DB. On this table the user 'asteriskcdr' has select, insert, update privileges. GRANT SELECT , INSERT ,UPDATE ON `Asterisk`.`cdr`

I'm evaluating using Polycom phones for our call center and I've set up my first phone (a SoundPoint 560) to give it a try. The phone is working and can successfully place and receive calls. But every minute, there's an error in the log file: chan_sip.c: Registration from '<sip:6193644850 at jtsd05>' failed for '192.168.200.99' - Username/auth name