similar to: asterisk T100P to Merlin Legend

Hi List, Merlin Magix hardware v02 I'm trying to get asterisk to act as a voicemail server for a lucent merlin magix PBX that we purchased used. We have 4 FXO channels between the two PBXs on a Sangoma A200 card. The 770 dialgroup is working properly, in that calls to 770 are answered by Asterisk. The magix is sending mode codes in the format #XX#XXX#, where the 2nd block of digits

Folks, I have a Merlin Legend R7 V10.0 with a 2 100D cards. I have 1 card in slot 4 going to CenturyTel, and the card in slot 10 going to a flip cable to a TE110P card in a Asterisk 1.6.x box. I have routing setup on the Merlin to send a block of numbers to the Asterisk. Currently the PSTN can dial the Asterisk Extensions. The Asterisk can dial Merlin Extensions. The Merlin can Dial Asterisk

Does Asterisk work with Lucent or any other PBX phone systems????

Hey All, I'll be configuring an asterisk box to be the voicemail server to an old Merlin system which had an octel 100 voicemail server that is now dying. My question is simple: do I need to stick an FXO card in the asterisk box? My logic is that if the Merlin Magix system is actually generating electrical current, then I would need to have an fxo card. Is this correct?

I have a legacy pbx that I know nothing about. The PBX is a merlin legend system (now owned by avaya). I have found information on the list that I can use a 100D T1 card to bridge the PBX to an asterisk system. We are looking to head this route as well as replacing are AUDIX VM system with Asterisk. Has anyone done this that wouldn't mind sharing some of the merlin specific setup?

Hi, I am really interested in the true capacity that Asterisk can handle. What is the maximum number of users that can be handled by Asterisk on a standard 2.4G P4 IBM server or similar? Anyone has a clue? Cheer, Vincent _________________________________________________________________ ninemsn Premium transforms your e-mail with colours, photos and animated text. Click here

Thanks. Is there a way I can log into the Merlin Magix to determine that? How else do I tell? ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Germann Sent: Monday, February 05, 2007 8:16 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users]

Greetings, I purchased a WiSIP at the VON conference and am now trying to configure it to work with Asterisk. I have read all of the previous postings regarding the WiSIP and most of the information apparently does not apply to the version of firmware installed on my phone (version WF.00.0F). I cannot get the WiSIP to register with my Asterisk box. It leases an IP from my DHCP server, then

I have a client using IAX Phone at his office to connect to his Asterisk located at a data center. His IAX Phone connects through his office NAT gateway device (unfortunately I don't know the specific brand and model). He can make calls just fine. However, he seems to have issues receiving calls. I monitored his Asterisk for a bit and noticed that his IAX Phone, which registers every 60

I've received my Aastra 390 phone. I got the unlock procedure from the vendor, and the services button now shows all four entrys as "<available>". When I give the phone "ADSIProg()" the phone displays: Asterisk PBX download refused Conflict with: <available> The asterisk.adsi hasn't been changed: DESCRIPTION "Asterisk PBX" VERSION 0x02 SECURITY

I'm replacing a Merlin for a client and they have a PagePal Intercom that I would like to reuse. Here is what I know about it: It has a screw-down wires that goto rj-11 (This was told to me over the phone) that went into one of the Merlin ports. I tried bring it up with fxo_ks and fxo_ls (assuming it was analog and autoanswered) but no luck. I would be happy to replace if anyone knows of

Hello all. When I use outlook express and try see the printer, it says "print$ on Merlin - Paused", and I can't unpause it, I get: "You do hot have permission to modify the settings for this printer. If you need to change the settings, contact your network administrator." Merlin is the name of our samba server. Also, when I try click on properties, nothing happens

We currently have a Merlin Legend system. The voicemail is falling apart (with the transition to a 10 digit timestamp on Sept. 8, 2001, the system locked up and refused to take calls; the official solution is to change the system time back to a year with a matching calendar). We are in the process of preparing the network infrastructure to support a VoIP system with Asterisk, but won't be

Hi, I'm trying to put together an * system with extremely high up time. The system as it stands now is 1 dual p4 with raid, redundant power, etc.. and a T100P card. I would like to get a second similar or identical box with another T100P card. I have 1 PRI, how do I get the second box to take over communication with the PRI should the first box fail? Of course I'd like this to be

In the next week or so, we'll be turning up a new T1 Pri from Cox Cable in Omaha using a T100P (installed but not yet configured). While discussing the interface parameters with a very knowledgable Cox engineer, we decided on some of the basics including b8zs, esf, dchan=24, callerid, 5 digits of called number forwarded to *, and switchtype=national (NI2). They indicated their CO switch is a

Hello, I will be setting up two asterisk systems and I'm looking for some suggestions as to what the best way to do this will be. The 2 systems are for 2 companies that share a single T1 line. The T1 line has 12 voice channels and 12 data channels. Currently, they are set-up as follows: T1 line from provider enters CSU/DSU and splits voice/data channels. The voice channels are sent to

I was just about to replace 2 Merlin Legend systems (one in my house and one in my Parent's house) with * systems. I have 2 beefy linux systems ready to go and have enough Cisco 7960 and 7970 phones to replace all my MLX-10D, MLX-16D and MLX-20 phones. Then I discovered that * seems to be lacking a critical feature for replacing a legend (or any standard PBX) and that is an ability for a

Has anyone really looked at the costs for Astricon. But the hotel costs. $111.00 USD per night.. come on guys give me a break. I will not be staying at that hotel. I can rent a car and stay near the air port for almost half that. In addition from what I have been told their will be no shuttle service from the Airport to the hotel. Anyone else have any input on this? bkw_ PS: I'm going

Hello, Does anybody know of a place to get a half-height PCI slot bracket for the Digium T100P card? I have an application to fit them in 1U cases for small, deployable PBX's. The T100P itself is short enough to fit in a half-height slot but I need an appropriate mounting bracket to screw it into the case. Thanks, Mark Hagler

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice