similar to: Strange problem with Dial

I have 3 analog trunks zap/1, zap/4 and zap/5. zap/5 is the least used line. Would the following work for 911 calls? [e911] exten => 911,1,ChanIsAvail(Zap/1) exten => 911,2,Dial(Zap/1/911) exten => 911,3,Hangup() exten => 911,102,ChanIsAvail(Zap/4) exten => 911,103,Dial(Zap/4/911) exten => 911,104,Hangup() exten => 911,203,ChanIsAvail(Zap/5) exten =>

Hi, I have a SPA-3000 and would like to use the 911 recipe from http://www.voip-info.org/wiki-Asterisk+tips+911. So I took the simple recipe and modified it slightly: exten => 911,1,ChanIsAvail(SIP/potsoutbound) exten => 911,2,Dial(SIP/potsoutbound/911) exten => 911,3,Hangup() exten => 911,102,SoftHangup(SIP/potsoutbound) exten => 911,103,Wait(1) exten => 911,104,Goto(1) Now,

I have a question, we have some locations were I'm just planning on putting in a PRI, management also wants analog lines incase the PRI is down and someone calls 911. Is there a way to use asterisk to seize a phone line from the fax machine? I don't want to have to have an analog line that only gets used in the very rare situation with the PRI being down and someone needed to dial 911

Rich, What about a combination of your excellent/intelligent suggestion & something like this: exten => 911,1,Dial(Zap/g17/${EXTEN}) exten => 911,2,SoftHangup(Zap/1-1) exten => 911,3,Wait(1) exten => 911,4,Goto(1) ... with the idea that if a line is not free, we forcible seize one. Probably not correctly written, but, do you "get" where I am going? How would I

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

I am having dial out issues and was hoping someone could shed some light. The problem is Intermittent: extensions.conf [globals] ; Trunk Info for outbound calls via PSTN - See the zapata.conf file in /etc/asterisk TRUNK=ZAP/G1 ;Trunk Interface ;MSD digits to strip (usually 1 or 0), 1 = remove a leading 9 TRUNKMSD=1 ; -------------------------------------------------- ; [trunklocal] - Defines

Hello All, I'm trying to dial out with no luck. I'm using Asterisk@Home defaults. I have one X100P card and SJPhone. *CLI> dial 96985628 No such extension '96985628' in context 'default' Here is my exten [trunklocal] ; ; Local seven-digit dialing accessed through trunk interface ; exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten =>

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

Here's a possible bug, or more likely, I'm just missing something. We have a pots card in one of our asterisk boxes. Its a simple asterisk setup with one FXO/FXS card and basic static extensions file, etc. When we dial out over the pots line, 4 out of 5 times, it will work. However, every 4 or 5 times, we get an error back from the provider that says "The number you have dialed.....

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

I read the wiki and looked at the examples, but I'm still having problems. I have a Digium 4 port card with POTS lines plugged into all four ports. How do I play the congestion tone the the caller when they try and dial out but all the lines are in use? should something like this work? [dial-trunklocal] ; Local calls ignorepat => 9 exten => _9NXXXXXX,1,Dial(${TRUNK1}/${EXTEN:1}) exten

Howdy, My first forray into using res_mysql.conf for realtime access of sip users and extensions. I have the following relevant section of extensions.conf: --- [trunklocal] exten => _NXXXXXX,1,Dial(${GLOBAL(TRUNK)}/${EXTEN:${GLOBAL(TRUNKMSD)}}) [local] include => trunklocal include => trunktollfree [longdistance] include => local include => trunkld [international] include

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?

A call comes in from the PSTN, Asterisk answers it, it goes to the directory, and then to the extension the caller designates and the user at that extension answers. The user at the extension then wants to transfer the call to another extension; on the Cisco 7940 they push the ?more? soft key, then the ?Transfer? soft key, then enter the extension number they want to transfer to, and hit the

Hi list, i've problems with my * server and the 4 phones which are linked to it. i've 2 grandstream bt100 with the firmware upgraded to 101, a wi-fi phone (i don't know its brand) and another ip phone i don't know its brand. with this sip.conf : [general] port = 5060 bindaddr = 192.168.100.229 context = default ;x changed from default to sip localnet = 192.168.100.0/24

This is my setup: SPA-2000 -> Asterisk -> X101P (x4) -> PSTN 3-way calling works fine if I use flash and dial just local extensions. Or even if I use flash and dial one local extension, and one remote party over the PSTN. However, as soon as I dial from my SPA-2000 out over the PSTN, and hit flash the call hangs-up about 50% of the time. The other 50% of the time it puts the call on

Hello guys. I am a fairly new user to Asterisk, and I'm just having a tough time. My goal is to set up a VOIP PBX. I have signed up with a BroadVoice number, and I have three systems with SIP phones. The PBX and the SIP phones are all behind a Cisco PIX running NAT. I am using Asterisk CVS version from yesterday. I also tried 1.0.3 with little luck. The SIP phones are two X-Lites on

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

In 1.4.43 I would see things from "core show channels" like DAHDI/18/xxxxx for line 18 in Asterisk 11 its DAHDI/i4/xxxx How do I get the line number back? Jerry