similar to: Three tdm400p's (loaded with FXOs)

Hello folks, I'm very interested in the Digium/Asterisk combination but need some clarification. I would like to setup a SOHO for business and home use. Scenario One: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS

Hello, Over the past several weeks, we have been having an intermittant problem with our deployment of a TDM400P card (4 fxo). ?We have tried many things, and the problem still re-occurs. The Problem: Occasionally (every 48 hours), the TDM400p card will stop answering incoming calls on ALL fxo ports. ?Attempts to send outbound calls on any Zap channel will result in hearing a loud

Hi all, We have an analog line from telco, on which 3-way calling is subscribed to. This line is plugged into an FXO module on a tdm400p. If an incoming call comes in on this line, can */zaptel send Flash to telco via the FXO module? If it could, then an incoming call could be 'transfered' to a cell-phone, for example, with a single analog line. (where 'transfer' is really

Hello. I've seen several posts talking about line quality using Digium cards that are sharing IRQs or on machines where X is running but after trying all of those fixes I am still having a problem with line static on outoing calls. BTW, calls that are from one extension to another extension have no static, however, they have occasional clicks and pops. At any rate, I was wondering if

Since the irc channel wasn't any help, I will try posting my problem here. I have two TDM400Ps less than a week old in a PC. All of the FXS ports work fine, and all of the FXO ports worked fine up until thisafternoon. If I try to dial in, I get a busy signal, if I try to dial out, all I hear is a very scratchy, very crackly dialtone. If I swap the first FXO module with the second on the card,

Hello list... 1) Is there an IAX softphone that supports any kind of voicemail indicator? 2) I have 2 TDM400Ps installed in a system. I need the audio on the analog phone (FXS modules) to be amplified somewhere between 10 and 15db so I set rxgain and txgain to 15 for the FXO interfaces and FXS interfaces. When a call comes in on the FXO at this setting, the call sometimes has about 20 seconds of

Hi all, I curious to know if other UIP200 users have this same issue: You flash (XFER button) to consult-transfer a caller to another extension. If the transfer target party is unavailable (ie: voicemail), there appears to be no way to get the original caller back. If it's a known limitation, has anyone come up with a functional work around? Thank -- ..................................

Hi all, A while back, there was a short thread on using the FXS interface from a Primus TalkBroadBand device (a DLink ATA) as a incoming line for the FXO interface on the TDM400P: Primus <--> DLink ATA FXS <--> TDM400P FXO <--> Asterisk In that thread, a couple of people suggested that this does not work reliabley, and the ATA FXS <--> TDM FXO link 'goes

Hi All, I'd really like to see a show of hands with regard to people's experience with FXO interfaces. I own a few X100p cards and have had nothing but problems with them. I also took part in Sipura's beta program, for the SPA-3000. While it can be an improvement over the X100p, it presently has echo problems that make it unusable. Sipura has not acknowledged the problem ( at least

I couldn't be happier with the simplicity of this - but it's a hack! Hi all, I'm currently using a SIP client (BT101) to connect via DSL to a remote instance of Asterisk. - Asterisk has a private IP behind my OFFICE router. - The SIP client has a private IP behind my HOME router. I'm doing this _without_ the use of STUN or proxy servers. Here's how it works: -

Hello all, The "Secret Agent" final release of the Asterisk Management Portal is now available for download: http://amp.coalescentsystems.ca/ This exciting new release adds a great deal of functionality and flexibility. Thank you for all the contributions and feedback! 1.10.007 - Added AMP Users (multi-department, basic multi-tenant) - Added incremental upgrade script

List members, Is it possible to record outbound analog calls using an X100P? I was asked if I knew how to record all calls for a shop with 4 analog phones transparently to the end users. I thought Asterisk was a good fit for this and I envisioned using either Digium TDM400Ps or Sangoma A200s with 4 FXO and 4 FXS modules. The FXO modules would be connected to the existing PBX and the FXS

Hello all, Asterisk Management Portal 1.10.009 has now been released. This exciting new version has several notable additions (listed below). The AMP homepage is http://amp.coalescentsystems.ca. Here you'll find links to the download, install guide, and documentation wiki. As usual, please use amportal-users mailing list for discussions about AMP:

Hi, We've recently deployed 6 Uniden UIP200 phones (running firmware 4.54). We've been having some serious problems: 1) All the phones randomly reboot themselves. Typically when trying to answer or initiate a call. 2) All the phones will disconnect from a calls with the PSTN after 2-3 minutes. 3) The phones are unable to interact with a remote IVR (digit presses are not received at

Hi all, haven't seen many posts about asterisk in Singapore... Getting a server going there and was wondering if TDM400Ps will be fine in FCC mode, and if there are indications / cadence values that I should be putting on there as in other international locations. Seen an unsettling post on voip-info about Singapore issues with Call Polarity/Hangup Detection -- crossing my fingers I

Anyone used voicetronix FXOs with * ? I'm interested to know how they compare with eg TDM400P. Specifically I'm interested in how good the echo canceller is. -Dan

Someone mentioned earlier (I can't find the message now) that they had a motherboard that allowed you to change IRQ assignments in BIOS. Does anyone happen to know how to identify motherboards that can do this? I'm going to put together a new machine now and I'm having trouble picking a motherboard for it (ordering from Dell or other online vendor is not an option, since I need

Ryan, from the console what does "zap show channel 1" or 2/3/4 in your case say. I have X100P's and I seem to be having similar sounding problems. I noticed that the above command shows the channel to be off-hook at all times when a phone line is plugged in. I don't know why or if it is a bug in the application reporting the status. dbc. Ryan Courtnage wrote: > On July 8,

I have Asterisk CVS-HEAD-05/25/04-17:13:22, Copyright (C) 1999-2004 Digium. Usign exclusively digium hardware. 3 TDM400P cards. 1 4xFXO 1 4xFXS 1 1xFX0 & 3xFXS When * is attending FXO calls, bridged to FXS calls, natively ofcourse, at a random time, the call hangus up. Also, for example, if a call is done, and an other extension hangup, there are some probability that the other extension

I have a TDM400P card all installed, and I can call out from a sip phone, but when I call from the PSTN into the asterisk machine, as soon as the Answer() gets called, the dial tone changes and is sounds like there is a lot of static on the line. Below is the part of the dial plan for answering the call. exten => s,1,Wait,1 exten => s,2,Answer exten => s,3,Dial(Sip/pfriedel,20,tT)