similar to: How to use more PCI Cards with FXO/FXS in case that TDMoE doesn't work

Hi, Are there any optimized codecs for Analog Blackfin DSP? If yes, from where we can download it? We are looking for Speech, Audio and Video codecs. Best Regards, Miroslav Nachev

Hi, I would like to ask you for advice how to solve the following case: I have a client (who happened to be my friend) and I have convinced him that the IP PBX solution is much better than the conventional telephone centrals (PBX). At the beginning he wanted to buy PBX Panasonic, but at this moment he is waiting for my decision. Because at the moment we are not so deeply familiar with these

Hi, We have potential client which would like to offer to him VoIP solution for 2000 subscribers (SIP based Phones) and 2 x PRI ISDN interfaces to the PSTN. In the next stage the subscribers will be increased up to 13,000. Because I am not haven't done similar big project I don't know how to calculate the price. The one way is using number of subscribers and the other is using PSTN

Hi, I would like to find some way for hardware coding instead software (using the Host CPU). Are there any PCI boards just with codecs (DSP) or other way? Best Regards, Miroslav Nachev COSMOS Software Enterprises, Ltd. Tel: (+359-2) 983-32-62 Mobile: (+359-88) 897-31-95 E-Mail: m_natchev@yahoo.com miro@space-comm.com http://www.space-comm.com

Hi, I can't find anywhere on the Asterisk web the license terms for commercial use of Asterisk software. Do I have to pay something (and how much) if I want to use the Asterisk in our IP PBX solutions? Best Regards, Miroslav Nachev COSMOS Software Enterprises, Ltd. Tel: (+359-2) 983-32-62 Mobile: (+359-88) 897-31-95 E-Mail: m_natchev@yahoo.com

Hi, Thank you. I will try it. Do you know some G.72x, GSM, and iLBC optimized for Blackfin ? I mean open source. -- Best regards, Miroslav mailto:miro@space-comm.com Wednesday, March 23, 2005, 9:05:11 PM, you wrote: JMV> Hi, JMV> As far as I understand, the last patch (for TI C5x) I merged in SVN also JMV> allows Blackfin to work, but I haven't

Hi, Can I use HT-486 as VoIP Gateway together with Asterisk? Are there any success experiences? -- Best Regards, Miroslav Nachev

Hello, I want to link several * boxes together. Some of them are dedicated as "user" servers (SIP and IAX clients connect to them) and some are used as PRI servers (where the PRIs are hooked onto). I think TDMoE is the only channel type where you can group different Interfaces into a single group. E.g. for using Dial(ZAP/g1/12345), I think you cannot group different IAX accounts

Hello, I've been using TDMoE accross 2 * boxes for months. It was working well, but * would crash when anyone would try to connect via h.323. So, I got the latest CVS release and compiled without h.323 support. After I made and installed the latest CVS the TDMoE channels stopped working. They have been working great (especially after we got echo cancel working them, thanks Mark) and the

We have been pretty much able to solve our echo problems, except for the primary mode in which we desire to operate our system. See system diagram at bottom. Prior to making adjustments to cancel echos (all echocancel=no): Call Type Result (Before) --------- --------------- CP <- LEC PRI * TDMoE * FXO -> AP

I've been experimenting with the zaptel TDMoE stuff and I've got it all working. Calls go from one asterisk box to the other, with no issues, except they don't bring the callerID along with them. I tried the e&m signalling from the wiki and I thought maybe that had something to do with it, so I just changed it to half fxsks and fxoks and that didn't help me any, I still

I am planning to configure * box A with PSTN interface to route faxes to * box B (running spandsp) over TDMoE. I am using 2xGb bonded NIC's for connection between servers. Was wondering - does anybody have experience with TDMoE over bonded interface - ie. does it work ok?. - does anybody have feedback using this scenario for fax? another question, perhaps someone knows what's the

Robert, > Is there a product to simulate a PRI trunk? (Robert > Goodyear) TDMoE emulates a T1. ;) Once the TDMoE link is up, Asterisk just sees 24-lines that appear to be a T1 instead of having to deal with all of the complexities of VoIP. This is useful, since probably 75% of the utility of VoIP is really just the fact that it can run over a network. It's also handy because it

Hi, I would like to make a call and then when I am connected to the destination to transfer the call to my coleague in the office. When we receive the call it is easy using "#". But when I am the originator the "#" doesn't work. Can you give me some suggestions? Best Regards, Miroslav Nachev COSMOS Software Enterprises, Ltd. Tel: (+359-2)

Dear Jean, The source code for G.729 can be download from ITU for free. Also, some developer can do yourself as open source G.729 codec without any help. In this case each who use this codec which source code is free and open source must pay, but not to the developer. Best Regards, Miroslav Nachev JMV> Le jeudi 24 mars 2005 ? 10:08 +0000, John Villar a ?crit : >>

When I was trying to run mutiple E1s over TDMoE, the zaptel would drivers complain about too little memory, whenever I added more than 31 channels. Requesting 62 channels in a dynamic span gave me ... span creation failed: Cannot allocate memory upon loading the zaptel drivers. How would you go about running, 8 or 16 say, E1s over TDMoE? Would you create multiple dynamic spans or just one large

If I have a system with 1 machine to handle incoming H.323 calls and then multiple machines to distribute them to T1 ports over TDMoE, where does the codec translation take place? Does it take place in the master system or does it take place in each of the slave TDMoE systems? Also, any idea how many concurrent G.729 calls a system like this would handle?

Juan, I dont see people here with "attitude" or any need to shut down this list as you suggested. Contrary to your experience, I find people to be quite helpful here. Steven's comment "Start here and then ask a real question" is definitely not arrogant IMHO. He is just trying to knock some etiquette on Luan. Besides, he did give him all the answer Luan was looking for.

I was trying to establish a TDMoE span of 4 channels between two Asterisk servers. Machine A has a T100P to our PBX. Machine B has no Zaptel hardware. With 4 channels (e&m signalling) the red alarm never clears, and eventually machine A panics. With 24 channels, the TDMoE span seems to work perfectly. Is this hardcoded somewhere? I don't really need a full 1.544 Mbps between my two

Hi all, I'm having some problems getting TDMoE setup for the 1st time. I have a TE405P installed in the main server with an ethernet cross-connection to the secondary machine. (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.) I'm using -HEAD from yesterday. On the main machine /etc/zaptel.conf: loadzone = us defaultzone=us