similar to: Internal Distinctive Ringing + Caller ID

I have a line from BT (UK) connected to my asterisk system, on a TDM400P. I am able to see either distinctive ring cadences or caller ID but not both. If I try to enable both, all drings show up as 0,0,0. This is a pain because, if I make a call out over that line and the number I call is busy, I can elect to camp on it (ringback), which results in a different cadence of ring when the called

I am somewhat unsure as to the definition of "Distinctive Ring". What I am trying to achieve is to have Zap connected phones (TDM400P) ring with different cadences depending on whether the call is incoming on the PSTN context or an IAX2 context. Googling, I find this from Mark: I've added distinctive ring support to Asterisk now (also I've added answer confirmation which is

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hello list, I'm observing what I believe to be inconsistent behaviour regarding "Newstate" AMI events for the "Ringing" state. As such I come to you asking for experience or advice: am I wrong or should I file a bug ? I present you a short introduction which I feel is relevant; however, if you want to go straight to my technical question, please scroll

Hi All... Can Asterick detect distinctive ringing on a POTS line and answer with different configurations? Thanks...

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Is it possible to allow distinctive rings work for FXS ports as well? I need a certain FXS extension to ring a distinctive double ring. I modified zapata.conf appropriately for dring1,dring2 and it just Seems to ignore my updates. Do distinctive rings only work for FXO ports? Paul Seniuk -------------- next part -------------- A non-text attachment was scrubbed... Name: Paul Seniuk.vcf

Hello - I have a TDM400P with 2 FXO and 2 FXS modules. Feeding the FXS modules are two VOIP lines which are terminated by VOIP adapters and have regular RJ11 wires connecting to the FXS ports. Since the two different VOIP lines have different phone numbers, and I know and can tell asterisk which VOIP line is connected to which FXS port, can I cause a distinctive ring on the extensions if a call

I am trying to get distinctive ring to work on my PSTN with no luck. I can get 2 different ring codes but it skips the context assigned... here is my complete zapata.conf: [channels] signalling=fxs_ks usecallerid=yes rxgain=1.0 txgain=1.0 language=en context=default usedistinctiveringdetection=yes dring1=134,0,0 dring2=137,0,0 dring1context=internal2 dring2context=default

In my extensions.conf file I'm attempting to distinctively ring one of my zap channels with a different ring depending upon whether the call is received from the DID or inside extension. The DID extension looks like so: exten => 5551236543,1,Dial,Zap/28r1|20 However, when I dial in on the DID the phone is not ringing at all. The CLI shows that Zap/28 is ringing and you can hear it

I hope somebody has seen this before... I'm trying to use a Dial command on a inbound call to ring multiple destinations. The calls come in to me from the provider on IAX2, and one of the destinations I try to ring is a IAX2 to call to my cell phone. When I add the IAX2 destination into the Dial command, the setup I am trying to achieve works (i.e. my Zap, SIP, and cell phone all ring) but

Russell Bryant wrote: > Greetings! > > Version 1.0.8 has been released of Asterisk, Asterisk-addons, Zaptel, > and Libpri. This release contains a significant amount of bug fixes > (possibly the most of the 1.0.X releases). Tarballs are available on > the asterisk web site as well as the asterisk ftp server. Thanks! I appreciate the effort you put into these releases.

I am trying to understand the relationship between loadzone and callerid. I am located in New Zealand and have noticed the following behaviour: Case A zaptel.conf loadzone = nz defaultzone = nz The Zap extension rings with NZ-style ringing but caller id doesn't work (message: Didn't finish Caller-ID spill). This is the case whether the call is external from Zap FXO or internal from SIP.

I'm using QSIG between an NEC SV8300 and Asterisk (after giving up with CCIS). Things work pretty well with the exception of issues on stations on the SV8300. When I call from Asterisk to a SV8300 station and I send my extension as the caller ID number, it shows up on the SV8300 as "OPERATOR". I've tried a few different TON/NPI values with no difference. If I set callerid to a

Hi All, I was wondering what the status of distinctive ring support in Asterisk is? I had a google search & read and Mark Spencer wrote some support for it. Is distinctive ring different in every country or is it pretty standard? And for my final question, does the Wildcard FXO card support distinctive ring? Essentially what I'm trying to do is route incoming calls with ring #1 to,

Hi All, I've recently got a "second" number installed on my PSTN line, trusting the Asterisk distinctive ring detection would work as expected. It appeared to work fine at the start, as the second number generated a different ring pattern to 0,0,0 (in the console) only to realise that almost every phone call to this "second" number generated a different ring pattern.

I have been looking into how to setup distinctive ringing on a SPA-2100. So far the only thing i have been able to find is how to define a distinctive ring in the spa config. What i cannot figure out is what SIP message i need to be sending to it in order for it use the ring. I did find out how to add the sip message for distinctive ring i just dont know what variable needs to be passed in order

I'm looking to give the SPA-3000 a whirl as I'm having too much difficulty with the irq sharing thing inside the box. I'm reading the book but without having one in-hand to play with it appears a little obtuse at this time. Before I drop down my money can someone with some hands-on with one of these confirm if the SPA-3000 can: a) detect inbound distinctive ring (this looks to me like

I have a TDM400 with 2 FXS cards, and a Samsung 6100 DECT base station connected to one of the ports. The base station appears to only support UK (BT) style CLIP Caller ID signalling. Does anyone know if it is possible to configure the ZAP channel to send in this format, or alternatively can you recommend a GAP compatible base station which will handle both BT and Bellcore signalling? A search

I've done the unspeakable. I took a working setup of 1.0.5 and upgraded with the latest cvs. with 1.0.5 distinctive ring worked great. with the latest cvs, it doesn't seem to work with my sipura 2000 (the only thing i have to test it with). I can see in console that its sending the info, but its not working? i realize the likely hood is I messed something up somehow during checkout or