similar to: Inbound Free World Dialup - extension not ringing?

Greetings, I'm having a miserable time getting Asterisk working with FWD. All the samples show something like... exten => _7., .... How do I get Asterisk to wait until the user is finished dialing instead of trying as soon as it gets the second digit? I can use _7XXX, and dial the FWD 3-digit test numbers fine, but I'd like to be able to dial others... Same problem for outside

I have looked all over the site(s) for help. But heres the problem. Im missing something. In coming works fine from FreeWorld via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net

I have configured iax.conf and extensions.conf as instructed on FWD website (http://www.freeworlddialup.com/help/?p=knowledgebase&c=18&a=76) and I can successfully receive calls and make test calls to 612, 613, etc. The problem is that I can not make a call to another FWD user. Here is what asterisk says: -- Executing [393xxxxxx@default:1] Set("Zap/1-1",

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

I am having trouble with this. I can dial 1800 numbers fine as well as FWD service numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten =>

Hi, I've been trying to dial out to a cellphone, but all my calls get redirected to 066 (the emergency number at my city, like 911) does anyone know how to fix this, any ideas,? does anyone from mexico has done this? Any comment will be highly appreciated, Regards, Claudio -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I Installed Asterisk on RedHat 9. I am currently try to configure minimum with two softphone talking to each other over the LAN. I am using X-Lite softphones from xten.com site. I defined 3 phones in sip.conf and also specifies in extensions.conf file. I am able to ring other computer but there is no voice exchange ( i can't hear any think except ring). Here is the portion of sip.conf

Guys. Can you dial 800 and 888 toll free numbers using FWD? how do you dial them cause I tried using 1800xxxxx and 1888xxxxx and I simply get a "nobody can asnwer the call" signal on asterisk. Can you dial 800 toll free from FWD?

Hi all I've only been working with Asterisk for a matter of days but have already grown into a big fan =) Much as I've managed to get internal calling working fine, I have a configuration running on an old PII-233 on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond W6692 PCI Card as /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try

What is the proper method to install/configure an X100P FXO card? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031009/ce8a7803/attachment.htm

Hi all, Can anybody tell me that wether I should install DIGIUM-TE120P card on redhat9.0 2.4.20-8 or 2.6.18 kernel. I am using kernel 2.6.18 but facing a very serious problem of modutils and iptable. Can anybody help me out. Thanx and Regards sanchal singh

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

I'm simply trying to forward calls to users who have the call forwarding feature enabled (FWD Status and FWD Ph Number kept in the astDB). The problem is that I want users to be able to forward calls to numbers that they would normally be allowed to dial within their own context. (I don't want a local call only person forwarding to a long dist number, for example.) I'm able to

Hello. You can't have two phones login with the same extension. You need to assign one phone to 101, and the other to 102. Set the user to 101 on one and 102 on the other. -Brian On Feb 11, 8:07am, "Juki" wrote: } Subject: [Asterisk-bsd] Asterisk not accepting multiple SIP phone logins } Hi all, } } I have Asterisk running on FreeBSD 4.x and I have made configurations to }

Dear, When I start asterisk -vvvvvvgrc and I ask 'sip show peers', I don't get the ip adress in the 'Host" field. Name = phone1 and phone2 Host=unspecified mask 255.255.255.255 port = 0 status = unmonitored I can ping the two phone's and get a reply (also from the laptop) phone ip adres 192.168.10.12 and 192.168.10.13 (server 192.168.10.11and laptop 192.168.10.14)

I have an OpenBSD 3.7 gateway. This gateway run Asterisk. I have two windows box which use X-Lite softphone, and each box connect to Asterisk using this softphone (X-Lite). Asterisk use the following configuration : /etc/asterisk/sip.conf ; Phone #1 [Phone1] type=friend host=dynamic nat=yes defaultip = 192.168.10.12 # windows box IP context = sip callerid="Phone1" <1> ;

I have the following asterisk configuration (sip.conf) : [General] externip=82.79.81.3 localnet=192.168.10.0 localmask=255.255.255.0 [Phone1] type=friend host=dynamic nat=yes qualify=yes context=sip callerid="Phone1" <1> disallow=all allow=gsm [Phone2] type=friend host=dynamic qualify=yes context=sip callerid="Phone2" <2> disallow=all allow=gsm [Phone3]

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040802/d9eed8fc/attachment.htm -------------- next part -------------- ? Hi Can anyone give suggestion why we need STUN while using asterisk behind the NAT. Regards Shan.