similar to: Fedora Core 2 (kernel 2.6.5), CAPI and Fritz PCI

Hi; I'm looking for a Polycom distributor in the UK who can supply a small number (around 20) IP301 / IP501 handsets. Can anyone recommend someone ? jd -- John Daragon john@argv.co.ok argv[0] limited Lambs Lawn Cottage, Staple Fitzpaine, Taunton, TA3 5SL, UK v +44 (0) 1460 234068 f +44 (0) 1460 234069 m +44 (0) 7836 576127

Hi; I've been asked to take a (remote) look at an Asterisk@home system running asterisk 1.0.9 on Centos 3.5. It's running chan_capi-0.3.5 It has an AVM c2 ISDN card which is plugged into what I believe to be a couple of BT ISDN2e "System Access" (i.e. point to point) connections. We've placed a support call to BT to find out how these lines are actually provisioned, but

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

We have tried Asterisk 1.0.9 on FC4 and have never been able to get CAPI (with Fritz card, fcpci) to work properly. Apart from that Asterisk works fine in switching internal calls. But it's useless if we can't make outgoing calls on our ISDN line. We are considering abandoning FC4 for Debian or SuSe. What is the general concensus on the best Linux to run Asterisk with CAPI? /Why Tea

Hi. Am new to this concept but have been requested to add VOIP capability to a small office phone system. They currently have 4 standard analog lines running into a PBX feeding 16 phones, with all the usual features, call transfer call hold internal calls etc. would the following seem reasonable ? asterisk server:- ( what specs ) cat5 > broadband (VOIP) 4 FXO's for incoming PSTN

Hi all, Anyone using their services ? I'm thinking of setting up my servers with their service. But before starting to mess with my extensions.conf I thought "let's check the community for their experience". Thanks, Michiel van Baak.

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

We've got a Toshiba DK system w/ analog ports that went to a voicemail server. I swapped in an Asterisk box with a Digium 4-port fxo card. It /almost/ worked perfectly. The problem is that Zap channels never hang up. They have to time out. I set up MeetMe, but all Zap channels hung forever. Very annoying. Same thing for FXO-to-FXO bridges. I figured out today why and fixed it.

Hi, I've had an inquiry for a small UK call centre, mostly outbound calls. I get the impression they are mainly calling 3G mobile phones, monthly phone bill, with calls is approx ?5,000 for several feature lines. How feasible is something like this with asterisk? I guess one big question is which type of circuit to use, ADSL in the UK is only 256kbs upstream, some providers do bonding but

Hi all I am looking at implementing asterisk at a company with two ISDN bricks (60 lines). I know that the VoIP will absorb at least on brick worth of lines but that still leaves me with a need for 30 ISDN lines. As far as I can tell most of the Digicom cards have 4 FXS ports and I've read on this list that at most two could coincide in a box simultaneously without causing an interupt

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

Hi, I'm currently looking to run Asterisk in the office to replace an old PBX and would appreciate a little help. We are moving offices and will have 8 digital lines. My questions are: As there are 8 digital lines is this known as PRI? Which Digium card would be the best fit? Would you recommend looking at the echo cancellation cards? We are UK based: is caller id supported by Asterisk

Is it possible to have nested MySQL queries in extensions.conf? Ie, perform a query, grab a value, and then jump to another location in the dialplan and do another query based on that original value. I'm having problems with the result and fetchid's and I'm not sure if it's even possible to do this or not. Thanks, Doug. -------------- next part -------------- An HTML

Hi List, We have a remote asterisk SIP phone at the cottage. I'd like it to have minimal privileges when it first registers with Asterisk. Ideally it should be in a restricted context. Dialing any number would intercept the call and tell the person to log on. This way, if the phone was stolen or someone got into the cottage, we wouldn't have a bunch of surprise charges on our phone

Hi, We recently tried installing Asterisk for a small office. We figured the safest way to go would be to buy from someone who sold equipment specifically for Asterisk and to use a consultant that they recommended. However ... it didn't turn out so great. Sound quality is terrible -- the echo is pretty bad, and there are popping noises, too. Callers say that people on the Asterisk end

$B$3$l$O<+F01~Ez$G$9(B. $B4IM}%"%I%l%9(B <cottage-request@eg.e-cell.org> $B7PM3$G(B Mailman $B$K(B $BAw$C$?%a!<%k%3%^%s%I$KLdBj$,$"$j$^$9(B. $B@5$7$$(B Mailman $B$N(B Email $B%3%^%s%I$N;H$$J}$K$D$$$F$O!$(B"help" $B$r%a!<%k$N7oL>$+K\J8$KF~$l$F(B <cottage-request@eg.e-cell.org> $B$X(B $BAw$C$F2<$5$$!%(B

Dear R users, I am trying to fill in arrays (5 different according to distinct "id") from objects produced from arbitrary data set below. a <-

I'm trying to create a single floppy based boot disk that will, depending on what the user enters, boot redHat, SUSE or Debian. Does anyone have any sample syslinux.cfg files that might allow me to boot via nfs? Also, I'm having trouble fitting init into initrd.img any ideas? Thanks -- Steve Glines voice: 978-952-6340 www.is-cs.com fax: 978-952-8524 145 Foster

I'm not sure if this belongs here or on an etherboot list. I've given up on trying to get a single floppy syslinux with enough stuff to remote mount a file system. I'm trying an etherboot floppy. When I boot the system finds the dhcp server and gets the right file name but then it gives me the message "not a valid image." A quick search of the net didn't help much.